Halltech Corvette Intake Systems

Halltech Hornet Intake for C8 Corvette Stingray

The Halltech Hornet Intake System delivers aggressive performance and race-ready airflow to the 2020–2025 C8 Corvette Stingray. Built to optimize the LT2 engine without requiring a tune, this carbon fiber intake maximizes throttle response, deepens the intake tone, and adds up to 17 rear-wheel horsepower—all while installing in under an hour. Corvette drivers looking for lightweight construction, high-flow filtration, and improved acceleration will feel the difference immediately.

Why Choose Halltech Hornet?

• Gain up to 17 horsepower – dyno-proven on stock C8 Stingray LT2 engines
• Carbon fiber intake body – heat-resistant, lightweight, and track-inspired
• Velocity stack air inlet – faster airflow and sharper throttle response
• Washable high-flow filter – zero restriction and reusable for long-term performance
• Smooth-bore tubing – eliminates turbulence for clean, consistent airflow
• Complete bolt-on kit – includes clamps, couplers, housing, and filter
• No tuning required – runs on factory ECU without check engine lights
• Corvette-specific fit – precision-engineered for Stingray engine bay

What to Expect

• Stronger low-end torque – better response from the first press of the pedal
• Bolder intake sound – deeper, more aggressive tone under acceleration
• Faster midrange power delivery – improved drivability and passing power
• Cleaner under-hood aesthetic – exposed carbon fiber adds a premium finish
• Quick install – bolt-on in under 60 minutes with basic tools
• Fully reversible – no permanent modifications needed
• Built for performance – trusted Halltech design, proven results

Corvette Compatibility

• C8 Corvette Stingray – 2020, 2021, 2022, 2023, 2024 and 2025
• Fits all LT2-equipped C8 Stingray models, including Coupe and HTC Convertible

What Corvette Owners Say:

"The Hornet turned my C8 into a whole new car. Throttle response is instant, and that growl is intoxicating." – Greg P., California

Ships fast to Corvette enthusiasts across the U.S.

Looking for more? Explore our full Corvette Intake Systems collection.

C7 Corvette Cold Air Intake – Halltech Stinger RZ Z06 (2015–2019)

Unlock the power of your 2015–2019 C7 Corvette Z06 with the Halltech Stinger RZ Cold Air Intake. Designed specifically for the supercharged LT4 engine, this intake offers a noticeable increase in airflow, horsepower, and throttle response. The Stinger RZ is the perfect choice for Corvette enthusiasts looking for more power without compromising on performance or sound.

The Halltech Stinger RZ Intake, part number STRZ06, features a high-flow dry filter that offers superior filtration and doesn’t require oiling, making it easier to maintain than traditional oiled filters. The high-flow design of the filter helps to improve airflow, enabling your LT4 engine to breathe better and perform at its peak.

The system includes a rotomolded intake tube that’s engineered to maintain smooth, efficient airflow into the engine, while minimizing heat soak. The Stinger RZ’s intake tube is larger than stock, allowing for better air intake into the engine, improving performance across the entire RPM range. Whether you’re street driving or hitting the track, the Stinger RZ intake will provide noticeable power gains.

Installation is simple, as the intake system is designed to mount directly to factory locations without requiring modifications. The system fits perfectly with the Z06’s supercharged engine, and installation takes just a short time to complete.

The Halltech Stinger RZ Cold Air Intake doesn’t just provide performance benefits—it enhances the engine's sound, giving your Corvette a more aggressive and satisfying growl under full throttle.

Why Choose Halltech Stinger RZ Cold Air Intake?

• Dry filter – No oiling required, easy to maintain
• Bolt-on installation – No cutting or tuning required
• Roto-molded intake tube – Designed for optimal airflow and reduced heat soak
• Engineered for LT4 – Maximizes performance for Z06 supercharged engines

Corvette Compatibility

• C7 Corvette Z06 – 2015, 2016, 2017, 2018, and 2019
• Fits all Z06 models with supercharged LT4 engines

What Corvette Owners Say:

"The power gain and sound are unreal. It's like a completely different car now!" – Michael, TX

Ships fast to Corvette enthusiasts across the U.S.

Explore our full C7 Corvette Intake Systems collection.

Halltech Stinger-RAZ Cold Air Induction System

Maximize your C7 Corvette Z06’s potential with the C7 Corvette Z06 intake from the Halltech Stinger-RAZ Stage 1 Ram Air series, crafted for 2015-2019 models with the LT4 engine. This true ram air induction system delivers cold, dense air to your engine, unlocking up to 50-55 RWHP for an exhilarating drive.

Engineered by Halltech in Ixonia, Wisconsin, the Stinger-RAZ features a rotomolded, tapered design with a high-flow K&N filter, ensuring optimal airflow and filtration for peak performance. Dyno-tested by over 20 independent shops, including GM dealerships, it set a world record for a single mod on the C7 Z06, achieving 10.39 seconds at 133.3 mph in the quarter mile at a national drag racing event.

The TRIC Ram Air System and Nomex heat shield sock channel cold air into the F-panel cavity, reducing heat soak for consistent power across all driving conditions. C7 Z06 owners report sharper throttle response, a deeper exhaust note, and enhanced acceleration, making every drive feel thrilling, whether on the track or the open road. This bolt-on upgrade is no tuning required, preserving your warranty while delivering race-proven results for Stingray, Grand Sport, and ZR1 enthusiasts. Note: Not legal for highway use in states adopting California emissions standards; avoid use in wet conditions like rain or car washes.

Why Choose Halltech Stinger-RAZ Cold Air Induction System?

• Increases horsepower by up to 50-55 RWHP
• High-flow K&N filter with 50% more surface area
• Rotomolded design maximizes air velocity
• TRIC Ram Air System channels cold air
• Nomex heat shield reduces heat soak
• Bolt-on installation, no tuning required
• Dyno-tested by over 20 independent shops
• Made in the USA with aerospace-grade materials

What to Expect

• Sharper throttle response for quick acceleration
• Deeper intake sound on every drive
• Improved quarter-mile times with proven results
• Consistent power with reduced heat soak
• Easy installation in about an hour
• Race-inspired performance for your C7 Z06

Corvette Compatibility

• C7 Corvette Z06: 2015, 2016, 2017, 2018, 2019
• Fits all LT4-equipped C7 Z06 models, including Coupe and Convertible

What Corvette Owners Say

“Bolting on the Halltech Stinger-RAZ to my 2017 C7 Z06 was a game-changer—I felt the power surge immediately, and the sound is incredible.” – C7 Z06 Owner, CorvetteForum

Discover more performance upgrades in our C7 Corvette Intake Collection.

Trusted by Corvette owners nationwide—shipped fast and secure.

Halltech STR Cold Air Induction System (2014-2019)

Elevate your C7 Corvette Stingray with the C7 Corvette Stingray intake from the Halltech STR series, designed for 2014-2019 models with the LT1 engine. This cold air intake boosts performance with up to 10-15 RWHP gains, enhancing your drive.

Engineered by Halltech in Ixonia, Wisconsin, since 1999, the STR features a fully rotomolded, tapered design with a high-flow K&N filter, providing 50% more surface area than stock for superior airflow. Dyno-tested for reliability, it delivers consistent power across the RPM range, ideal for street or track use.

The STR includes a velocity stack for laminar airflow and a heat shield to reduce heat soak, ensuring cool air delivery. C7 Stingray owners note a refined exhaust note and improved throttle response, making drives more thrilling. This bolt-on upgrade requires no tuning, preserving your warranty.

Why Choose Halltech STR Cold Air Induction System?

• Boosts horsepower by up to 10-15 RWHP
• High-flow K&N filter with 50% more surface area
• Rotomolded design maximizes air velocity
• Velocity stack ensures smooth airflow
• Heat shield minimizes heat soak effects
• Bolt-on installation, no tuning required
• Dyno-tested for reliable performance gains
• Made in the USA with premium materials

What to Expect

• Improved throttle response for quick acceleration
• Refined exhaust note on every drive
• Enhanced street performance with power gains
• Consistent airflow with heat protection
• Easy installation in about an hour
• Reliable performance for your C7 Stingray

Corvette Compatibility

• C7 Corvette Stingray: 2014, 2015, 2016, 2017, 2018, 2019
• Fits all LT1-equipped C7 Stingray models, including Coupe and Convertible
• Not CARB compliant; not for sale or use in California

What Corvette Owners Say

“The Halltech STR added a noticeable kick to my 2016 C7 Stingray—love the sound!” – C7 Owner, CorvetteForum

Discover more performance upgrades in our C7 Corvette Intake Collection.

Fast nationwide shipping—your Corvette parts delivered with care.

Halltech STR Cold Air Induction System (2017-2019)

Boost your C7 Corvette Grand Sport with the C7 Corvette Grand Sport intake from the Halltech STR series, designed for 2017-2019 models with the LT1 engine. This cold air intake enhances performance, delivering up to 10-15 RWHP gains for a thrilling drive.

Crafted by Halltech in Ixonia, Wisconsin, since 1999, the STR boasts a rotomolded, tapered design with a high-flow K&N filter, offering 50% more surface area than stock for optimal airflow. Dyno-tested for durability, it ensures steady power across all RPMs, perfect for spirited drives or track days.

The STR features a velocity stack for smooth airflow and a heat shield to combat heat soak, maintaining cool air intake. Grand Sport owners report a crisp exhaust tone and sharper throttle response, elevating every journey. This bolt-on upgrade requires no tuning, preserving your warranty, and is built for enthusiasts seeking reliable performance.

Why Choose Halltech STR Cold Air Induction System?

• Increases horsepower by up to 10-15 RWHP
• High-flow K&N filter with 50% more surface area
• Rotomolded design enhances air velocity
• Velocity stack promotes efficient airflow
• Heat shield reduces heat soak impact
• Bolt-on installation, no tuning needed
• Dyno-tested for consistent performance gains
• Made in the USA with quality materials

What to Expect

• Quicker throttle response for dynamic drives
• Crisp exhaust tone with every rev
• Improved performance on street or track
• Reliable airflow with heat protection
• Simple installation in about an hour
• Enhanced driving for your C7 Grand Sport

Corvette Compatibility

• C7 Corvette Grand Sport: 2017, 2018, 2019
• Fits all LT1-equipped C7 Grand Sport models, including Coupe and Convertible
• Not CARB compliant; not for sale or use in California

What Corvette Owners Say

“The Halltech STR gave my 2018 Grand Sport a real edge—sounds amazing!” – C7 Owner, CorvetteForum

Discover more performance upgrades in our C7 Corvette Intake Collection.

Trusted across the US by Corvette owners—shipped with speed.

Halltech Venom II Cold Air Induction System (2005-2007)

Unleash your C6 Corvette’s potential with the C6 Corvette intake from the Halltech Venom II series, crafted for 2005-2007 models with the LS2 engine. This cold air intake delivers up to 15 RWHP gains, transforming your driving experience.

Designed by Halltech in Ixonia, Wisconsin, since 1999, the Venom II features a rotomolded design with a massive K&N filter, flowing over 1250 CFM for superior airflow. Dyno-tested on the Katech Superflow dyno, it adds 12 lbs-ft of torque, ensuring robust performance for street or track.

The system includes a Beehive heat shield to isolate the filter from engine heat, capturing cold air with optional cutouts for enhanced induction. C6 owners appreciate the smoother throttle response and bolder exhaust tone, making every rev exhilarating. This bolt-on upgrade uses the stock MAF sensor and wiring, requiring no tuning, preserving your warranty.

Why Choose Halltech Venom II Cold Air Induction System?

• Adds up to 15 RWHP and 12 lbs-ft torque
• High-flow K&N filter exceeds 1250 CFM
• Rotomolded design optimizes air velocity
• Beehive heat shield enhances cold air intake
• Positive stop flange ensures smoother flow
• Bolt-on installation, no tuning needed
• Dyno-tested for proven performance gains
• Made in the USA with quality materials

What to Expect

• Smoother throttle response for spirited drives
• Bolder exhaust tone with every throttle
• Enhanced power on street or track
• Reliable airflow with heat isolation
• Simple installation in under an hour
• Dynamic performance for your C6 Corvette

Corvette Compatibility

• C6 Corvette LS2: 2005, 2006, 2007
• Fits all LS2-equipped C6 models, including Coupe and Convertible
• Not CARB compliant; not for sale or use in California

What Corvette Owners Say

“The Venom II on my 2006 C6 LS2 sounds incredible—power boost is real!” – C6 Owner, CorvetteForum

Discover more performance upgrades in our C6 Corvette Intake Collection.

Speedy, secure shipping for Corvette enthusiasts nationwide.

Halltech Killer Bee MF108 Cold Air Induction System (2006-2013)

Power up your C6 Corvette with the C6 Corvette intake from the Halltech Killer Bee MF108 series, designed for 2006-2013 Base LS3, Grand Sport, and Z06 models with LS3 or LS7 engines. This ram air intake delivers up to 20 RWHP gains, elevating performance.

Built by Halltech in Ixonia, Wisconsin, since 1999, the Killer Bee MF108 features a rotomolded polyethylene plastic design with a 108mm MAF entrance/exit, paired with a high-flow K&N filter for superior airflow. Dyno-tested for durability, it set a world record at 9.97 seconds at 137.72 mph on a Z06, proving its track-ready power.

The system includes a velocity stack for laminar flow and a Beehive heat shield to isolate engine heat, capturing cold air for optimal performance. C6 owners enjoy a deeper exhaust growl and enhanced throttle response, making every drive exhilarating. This upgrade requires MAF recalibration for tuners but improves idle with its forward MAF design.

Why Choose Halltech Killer Bee MF108 Cold Air Induction System?

• Gains up to 20 RWHP for track-ready power
• High-flow K&N filter enhances air volume
• Rotomolded polyethylene ensures lasting durability
• Velocity stack promotes efficient airflow
• Beehive heat shield optimizes cold air intake
• MAF-forward design improves idle manners
• Dyno-tested for proven performance excellence
• Made in the USA with premium materials

What to Expect

• Deeper exhaust growl with every throttle
• Enhanced throttle response for spirited drives
• Improved power on street or track
• Reliable airflow with heat isolation
• Installation in under two hours
• Dynamic performance for your C6 Corvette

Corvette Compatibility

• C6 Corvette Base LS3: 2008, 2009, 2010, 2011, 2012, 2013
• C6 Corvette Grand Sport: 2010, 2011, 2012, 2013
• C6 Corvette Z06: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
• Fits all LS3/LS7-equipped C6 models, including Coupe and Convertible
• Not CARB compliant; not for sale or use in California

What Corvette Owners Say

“The Killer Bee MF108 on my 2011 C6 Z06 is a game-changer—pure power!” – C6 Owner, CorvetteForum

Discover more performance upgrades in our C6 Corvette Intake Collection.

Corvette parts shipped nationwide—fast delivery you can trust.

Halltech Super Bee MF103 Cold Air Induction System (2006-2013)

Enhance your C6 Corvette’s performance with the C6 Corvette intake from the Halltech Super Bee MF103 series, designed for 2006-2013 Base LS3, Grand Sport, and Z06 models with LS3 or LS7 engines. This ram air intake adds up to 17 RWHP gains, boosting your drive.

Manufactured by Halltech in Ixonia, Wisconsin, since 1999, the Super Bee MF103 features a rotomolded polyethylene plastic design with a 102.5mm MAF entrance/exit, paired with a high-flow K&N filter for exceptional airflow. Dyno-tested by Katech, it delivers a proven 17 HP gain on a 606 HP Street Attack motor, showcasing track-ready performance.

The system includes a velocity stack for smooth flow and a Beehive heat shield to block engine heat, ensuring cold air intake with optional shroud cutouts for full ram air effect. C6 owners report a throatier exhaust sound and improved throttle response, making drives more dynamic. This bolt-on upgrade requires no tuning, maintaining your warranty with better-than-stock idle manners.

Why Choose Halltech Super Bee MF103 Cold Air Induction System?

• Adds up to 17 RWHP for proven power
• High-flow K&N filter enhances air capacity
• Rotomolded polyethylene ensures rugged durability
• Velocity stack optimizes airflow efficiency
• Beehive heat shield captures cold air
• No tuning needed, preserves warranty
• Dyno-tested for consistent performance gains
• Made in the USA with premium materials

What to Expect

• Throatier exhaust sound with every rev
• Improved throttle response for lively drives
• Enhanced power on street or track
• Reliable airflow with heat protection
• Easy installation in about an hour
• Dynamic performance for your C6 Corvette

Corvette Compatibility

• C6 Corvette Base LS3: 2008, 2009, 2010, 2011, 2012, 2013
• C6 Corvette Grand Sport: 2010, 2011, 2012, 2013
• C6 Corvette Z06: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
• Fits all LS3/LS7-equipped C6 models, including Coupe and Convertible
• Not CARB compliant; not for sale or use in California

What Corvette Owners Say

“The Super Bee MF103 on my 2012 C6 Z06 unleashed serious power—love the sound!” – C6 Owner, CorvetteForum

Discover more performance upgrades in our C6 Corvette Intake Collection.

From coast to coast—Corvette shipping done right.

Halltech Venom Cold Air Induction System (2001-2004)

Transform your C5 Corvette with the C5 Corvette intake from the Halltech Venom series, designed for 2001-2004 Base and Z06 models with LS1 or LS6 engines. This cold air intake delivers up to 10-15 RWHP gains, amplifying your drive.

Developed by Halltech in Ixonia, Wisconsin, since 1999, the Venom features a rotomolded design with a 15-inch wide K&N filter and a built-in velocity stack flange for enhanced airflow. Dyno-tested to add 10-15 HP on the Katech Engine Dyno, it’s ideal for street or track performance.

The system leverages the stock MAF sensor for seamless integration, requiring no tuning and preserving your warranty. C5 owners highlight a throatier exhaust tone and improved throttle response, making every journey more dynamic. The washable K&N filter ensures durability with easy maintenance using a K&N cleaning kit.

Why Choose Halltech Venom Cold Air Induction System?

• Gains up to 10-15 RWHP for proven power
• 15-inch K&N filter enhances air capacity
• Rotomolded design ensures lasting durability
• Velocity stack optimizes airflow efficiency
• Uses stock MAF sensor for easy integration
• No tuning needed, preserves warranty
• Dyno-tested for consistent performance gains
• Made in the USA with premium materials

What to Expect

• Throatier exhaust tone with every rev
• Improved throttle response for spirited drives
• Enhanced power on street or track
• Reliable airflow for consistent performance
• Easy installation in about an hour
• Dynamic driving for your C5 Corvette

Corvette Compatibility

• C5 Corvette Base LS1: 2001, 2002, 2003, 2004
• C5 Corvette Z06 LS6: 2001, 2002, 2003, 2004
• Fits all LS1/LS6-equipped C5 models, including Coupe and Convertible
• Not CARB compliant; not for sale or use in California

What Corvette Owners Say

“The Venom on my 2003 C5 Z06 delivers awesome power—sounds incredible!” – C5 Owner, CorvetteForum

Discover more performance upgrades in our C5 Corvette Intake Collection.

Nationwide shipping for Corvette lovers—fast, reliable delivery.