Corvette Kooks Headers

C8 Corvette Stingray Kooks High Flow Cats

C8 Corvette Kooks Ultra Green Cats- 21803300. Designed and Engineered to be a direct bolt on application for the all new mid-engine C8 Stingray Corvette, these Kooks Super Street Ultra Green Cats DO NOT require a Tune! Manufactured from the high grade 304 Stainless Steel and featuring 3" OEM connections 3/8" inlet and outlet flanges that bolt directly to the stock mounting locations. The Kooks Super Street High Flow Cats are meticulously made and fit precisely into the tight C8 Corvette engine compartment and fit perfectly with no alterations to your Stingray.

C8 Corvette Stingray Kooks High Flow Cats are manufactured in their state of the art facility in Mooresville NC. Equipped with some of the most advanced CNC and Mandrel Bending equipment in the industry, you can be sure that the Poppa Kooks would be proud. Their technologically advanced equipment and expertise allows them to achieve Mil-Spec tolerances, avoiding exhaust leaks and fitment issues. The 300 Cell High Flow Cats feature flanged inlet and outlets, Stock Bolt Pattern, bolts to OEM or Kooks Headers, replaces OEM catalytic Converters and were designed and engineered not to set off a (CEL) Check Engine Light. For over 55 Years Kooks has been a leader in Performance Exhaust Systems and their C8 Corvette Stingray High Flow Cats are no exception. Each kit includes everything you will need for installation, including all hardware, gaskets and a full set of instructions. No other parts are needed! Bolt on power and sound for your 2020 Stingray with C8 Corvette Stingray Kooks Hig Flow Cats. 21803300

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

C8 Corvette Kooks Headers

C8 Corvette Kooks Super Street Headers - 1-7/8"- Stingray - 21801400. Designed and Engineered to be a direct bolt on application for the all new mid-engine C8 Stingray Corvette, these Kooks Super Street Headers DO NOT require a Tune! Manufactured from the high grade 304 Stainless Steel and featuring 1-7/8 Equal Length Primary Tubes, massive 3/8" thick Header flanges, Oval Ports, 3/8" 3 bolt outlet flanges that bolt directly to the stock mounting locations. The Kooks Super Street Headers are meticulously made and fit precisely into the tight C8 Corvette engine compartment, ensuring that proper ventilation is maintained and overall engine temperature is not increased. 

C8 Corvette Stingray Kooks Headers are manufactured in their state of the art facility in Mooresville NC. Equipped with some of the most advanced CNC and Mandrel Bending equipment in the industry, you can be sure that the Poppa Kooks would be proud. Their state of the art equipment and expertise allows them to achieve Mil-Spec tolerances, avoiding exhaust leaks and fitment issues. The patented scavenging spikes and one piece collectors put down 20 Horsepower and 26 ft/lbs of Torque and did not set of a Check Engine Light. For over 55 Years they has been a leader in Performance Exhaust Systems and their C8 Corvette Stingray Kooks Headers are no exception. Each kit includes everything you will need for installation, including all hardware, bolt kit, gaskets and a full set of instructions. No other parts are needed! Bolt on power for your 2020 Stingray with C8 Corvette Kooks Super Street Headers. 21801400

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

C8 Corvette Cat Heat Shield

Protect all the sensitive and operational parts in your engine bay with this C8 Corvette Kooks Catalytic Converter Heat Shield. Keeps the heat in the cats and prohibits excessive heat soak from affecting performance. This Kooks C8 Corvette Catalytic Converter Heat Shield is designed and engineered to be a perfect fit and last a life time. Sold as a Pair (2)

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

Product Note: Does not include Catalytic Converters

C7 Corvette Kooks 2 inch Long Tube Headers

C7 Corvette Kooks Headers 2" with High Flow Cats - Street. This C7 Corvette Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance and features massive 2 inch primaries. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C7 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included with this 2 inch Kooks Long Tube Header system for the C7 Corvette Stingray, and Grand Sport is a center section X-Pipe with High Flow Cats.  The X-Pipe is a full 3 inches, that necks down to 2.75” at the over the axle flange to perfectly mate with your OEM or Aftermarket Axle Back Exhaust. Each Kooks Stingray Header System comes with New Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Kooks Corvette Long Tube Headers require a Tune to get maximum Horse Power and Torque Gains. Bolt on a set of Kooks Headers on your C7 Corvette and let the fun begin. Kooks 2170H620

Kooks Mission Statement is "Superior Engineering with Performance Excellence" and that is what you get with every single set of Kooks Corvette Long Tube Headers and Exhaust Systems. Their manufacturing facility in Moorseville NC is equipped with some of the most advanced CNC and Mandrel Bending machines in the industry. Their state of the art equipment and expertise allows them to achieve Mil-Spec tolerances. Their own in house R&D testing center allows them to put out some of the most powerful Corvette Headers available. For over 50 Years Kooks has been a leader in Performance Exhaust Systems and their Corvette Headers are no exception. Kooks Long Tube Headers can be found on High Performance Street Corvettes and Corvette Race Cars world wide. 

Free Shipping

Fitment: C7 Corvette Stingray and Grand Sport (6.2L LT1) (2014 - 2019)

C7 Corvette Kooks 2 inch Long Tube Headers with Green Cats

C7 Corvette Kooks Headers 2" with High Flow Cats Green Cats - Street. This C7 Corvette Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance and features 2 inch primaries. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C7 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included with this 2 inch Kooks Long Tube Header system with Green Cats for the C7 Corvette Stingray, Grand Sport and Z06 is a center section X-Pipe with High Performance Green Cats. Green Cats are perfect for C7 Corvettes with high horsepower applications, like Turbo Charging, Supercharging or big CAM builds. The X-Pipe is a full 3 inches, that necks down to 2.75” at the over the axle flange to perfectly mate with your OEM or Aftermarket Axle Back Exhaust. Each Kooks Header System comes with New Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Kooks Corvette Long Tube Headers require a Tune to get maximum Horse Power and Torque Gains. Bolt on a set of Kooks Headers on your C7 Corvette and let the fun begin. Kooks 2170H630

Kooks Mission Statement is "Superior Engineering with Performance Excellence" and that is what you get with every single set of Kooks Corvette Long Tube Headers and Exhaust Systems. Their manufacturing facility in Moorseville NC is equipped with some of the most advanced CNC and Mandrel Bending machines in the industry. Their state of the art equipment and expertise allows them to achieve Mil-Spec tolerances. Their own in house R&D testing center allows them to put out some of the most powerful Corvette Headers available. For over 50 Years Kooks has been a leader in Performance Exhaust Systems and their Corvette Headers are no exception. Kooks Long Tube Headers can be found on High Performance Street Corvettes and Corvette Race Cars world wide. 

Free Shipping

Fitment: C7 Corvette Stingray, Grand Sport and Z06 - LT1 / LT4 / LT5 (2014, 2015, 2016, 2017, 2018 and 2019)

C7 Corvette Kooks 1-7/8 Long Tube Headers

C7 Corvette Kooks Headers 1-7/8" with High Flow Cats - Street. This C7 Corvette Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance and features 1-7/8 inch primaries. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C7 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included with this 1-7/8 Kooks Long Tube Header system for the C7 Corvette Stingray, and Grand Sport is a center section X-Pipe with High Flow Cats.  The X-Pipe is a full 3 inches, that necks down to 2.75” at the over the axle flange to perfectly mate with your OEM or Aftermarket Axle Back Exhaust. Each Kooks Stingray Header System comes with New Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Kooks Corvette Long Tube Headers require a Tune to get maximum Horse Power and Torque Gains. Bolt on a set of Kooks Headers on your C7 Corvette and let the fun begin. Kooks 2170H420

Kooks Mission Statement is "Superior Engineering with Performance Excellence" and that is what you get with every single set of Kooks Corvette Long Tube Headers and Exhaust Systems. Their manufacturing facility in Moorseville NC is equipped with some of the most advanced CNC and Mandrel Bending machines in the industry. Their state of the art equipment and expertise allows them to achieve Mil-Spec tolerances. Their own in house R&D testing center allows them to put out some of the most powerful Corvette Headers available. For over 50 Years Kooks has been a leader in Performance Exhaust Systems and their Corvette Headers are no exception. Kooks Long Tube Headers can be found on High Performance Street Corvettes and Corvette Race Cars world wide. 

Fitment: C7 Corvette Stingray and Grand Sport (2014 - 2019)

C7 Corvette Kooks Stepped Long Tube Headers with Green Cats

C7 Corvette Kooks Headers 1-7/8" x 2" Stepped with High Flow Green Cats - Street. This C7 Corvette Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance and features 1-7/8" x 2" Stepped primaries with High Flow cats. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C7 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included with this C7 Corvette Kooks Stepped Long Tube Header system for the Stingray, Grand Sport and Z06 is a center section X-Pipe with High Performance Green Cats. Green Cats are perfect for C7 Corvettes with high horsepower applications, like Turbo Charging, Supercharging or big CAM builds. The X-Pipe is a full 3 inches, that necks down to 2.75” at the over the axle flange to perfectly mate with your OEM or Aftermarket Axle Back Exhaust. Each Kooks Stingray Header System comes with New Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Kooks Corvette Long Tube Headers require a Tune to get maximum Horse Power and Torque Gains. Bolt on a set of Kooks Headers on your C7 Corvette and let the fun begin. Kooks 2170H530

Kooks Mission Statement is "Superior Engineering with Performance Excellence" and that is what you get with every single set of Kooks Corvette Long Tube Headers and Exhaust Systems. Their manufacturing facility in Moorseville NC is equipped with some of the most advanced CNC and Mandrel Bending machines in the industry. Their state of the art equipment and expertise allows them to achieve Mil-Spec tolerances. Their own in house R&D testing center allows them to put out some of the most powerful Corvette Headers available. For over 50 Years Kooks has been a leader in Performance Exhaust Systems and their Corvette Headers are no exception. Kooks Long Tube Headers can be found on High Performance Street Corvettes and Corvette Race Cars world wide. 

Free Shipping

Fitment: C7 Corvette Stingray, Grand Sport and Z06 - LT1, LT4 and LT5 (2014 - 2019)

C7 Corvette Kooks 1-7/8" Long Tube Headers with Green Cats

C7 Corvette Kooks Headers 1-7/8" with High Flow Green Cats - Street. This C7 Corvette Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance and features 1-7/8 inch primaries. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C7 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included with this 1-7/8 Kooks Long Tube Header system with Green Cats for the C7 Corvette Stingray, Grand Sport and Z06 is a center section X-Pipe with High Performance Green Cats. Green Cats are perfect for C7 Corvettes with high horsepower applications, like Turbo Charging, Supercharging or big CAM builds. The X-Pipe is a full 3 inches, that necks down to 2.75” at the over the axle flange to perfectly mate with your OEM or Aftermarket Axle Back Exhaust. Each Kooks Header System comes with New Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Kooks Corvette Long Tube Headers require a Tune to get maximum Horse Power and Torque Gains. Bolt on a set of Kooks Headers on your C7 Corvette and let the fun begin. Kooks 2170H430

Kooks Mission Statement is "Superior Engineering with Performance Excellence" and that is what you get with every single set of Kooks Corvette Long Tube Headers and Exhaust Systems. Their manufacturing facility in Moorseville NC is equipped with some of the most advanced CNC and Mandrel Bending machines in the industry. Their state of the art equipment and expertise allows them to achieve Mil-Spec tolerances. Their own in house R&D testing center allows them to put out some of the most powerful Corvette Headers available. For over 50 Years Kooks has been a leader in Performance Exhaust Systems and their Corvette Headers are no exception. Kooks Long Tube Headers can be found on High Performance Street Corvettes and Corvette Race Cars world wide. 

Free Shipping

Fitment: C7 Corvette Stingray, Grand Sport and Z06 - LT1 / LT4 LT5 (2014 - 2019)

C6 Corvette Spark Plug Wires

C6 Corvette Kooks Spark Plug Wires. Get the added protection you need with Long Tube Header with a set of Kooks Spark Plug Wires. Featuring high conductivity 11mm Wires (8 pc. Set) with Grey with Black Boots. 2005 -2013 6.0L/6.2L/7.0L V8 Engines with Coil Packs in OEM location. 11mm High temp Silicone insulation help these wires withstand the extra heat of High Performance builds. High Temp Silicone boots are angled 90 degrees at the coil pack end, and 45 degrees at the Spark Plug end to maximize clearance to headers. Trusted by just about every major racing organization on the planet, Kooks C6 Corvette Spark Plug wires are up to the test. (Add Heat Shield Boots)

Fitment: C6 Corvette Base, Grand Sport and Z06. LS2 - LS3 - LS7 - (2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 and 2013)

Fitment: Fits applications with Stock Coil Pack Location

C6 Corvette Kooks 2 inch Long Tube Headers with Green Cats

C6 Corvette Kooks Headers 2" with Green Cats - Street. Manufactured with High Grade T304 Aircraft Quality Stainless Steel and Mandrel Bent for maximum performance. This C6 Corvette Long Tube Header System from Kooks features massive 2" inch primaries which dump into massive 3 inch race style collectors for peak Horsepower and Torque gains. All Kooks C6 Corvette Headers are machine TIG Welded using state of the art robots for a perfect balance un-restricted air flow.

Included in this C6 Corvette Kooks Long Tube Header Set is a center section X-Pipe with High Performance Green Cats. Green Cats are perfect for C6 Corvettes with high horsepower applications, like Turbo Charging, Supercharging or big CAM builds. This Header Set has Emission Fittings and is intended for street use where allowed by law. The X-Pipe is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section.

Included with your Kooks Long Tube Header System is a new set of Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Installing a set of Long Tube Headers will require an aftermarket tune

Kooks Headers and Exhaust has been a leader in aftermarket Corvette exhaust systems for over 50 years. All their products are backed by a limited lifetime warranty. Kooks 2160H631 and 2160H632

Free Shipping

Fitment: C6 Corvette Base and Grand Sport. LS2 and LS3 - (2005 - 2013)

Product Note: Street Headers are manufactured WITH Emissions Bungs

C6 Corvette Z06 Kooks 2" Long Tube Headers

C6 Corvette Z06 Kooks Headers 2" with High Flow Cats - Street. Manufactured with High Grade T304 Aircraft Quality Stainless Steel and Mandrel Bent for maximum performance. This C6 Corvette Z06 Long Tube Header System from Kooks features massive 2 inch primaries which dump into massive 3 inch race style collectors for peak Horsepower and Torque gains. All Kooks C6 Corvette Z06 Headers are machine TIG Welded using state of the art robots for a perfect balance un-restricted air flow.

Included in this C6 Corvette Z06 Kooks Long Tube Header Set is a X-Pipe with Kooks High Flow Catalytic Converters. This Header Set includes Emission Fittings and is intended for street use where allowed by law. The X-Pipe with High Flow Cats is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section. 

Included with your Kooks Long Tube Header System is a new set of Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Installing a set of Long Tube Headers will require an aftermarket tune

Kooks Headers and Exhaust has been a leader in aftermarket Corvette exhaust systems for over 50 years. All their products are backed by a limited lifetime warranty. Kooks 2161H621

Free Shipping

Fitment: C6 Corvette Z06 - (2006 - 2013)

Product Note: Street Headers are manufactured WITH Emissions Bungs

C6 Corvette Z06 Kooks 2" Long Tube Headers with Green Cats

C6 Corvette Z06 Kooks Headers 2" with Green Cats - Street. Manufactured with High Grade T304 Aircraft Quality Stainless Steel and Mandrel Bent for maximum performance. This C6 Corvette Z06 Long Tube Header System from Kooks features massive 2" inch primaries which dump into massive 3 inch race style collectors for peak Horsepower and Torque gains. All Kooks C6 Corvette Z06 Headers are machine TIG Welded using state of the art robots for a perfect balance un-restricted air flow.

Included in this C6 Corvette Z06 Kooks Long Tube Header Set is a center section X-Pipe with High Performance Green Cats. Green Cats are perfect for C6 Corvettes with high horsepower applications, like Turbo Charging, Supercharging or big CAM builds. This Header Set has Emission Fittings and is intended for street use where allowed by law. The X-Pipe is a full 3" to hook up to Factory (OEM)" Axle Back Muffler Section.

Included with your Kooks Long Tube Header System is a new set of Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Installing a set of Long Tube Headers will require an aftermarket tune

Kooks Headers and Exhaust has been a leader in aftermarket Corvette exhaust systems for over 50 years. All their products are backed by a limited lifetime warranty. Kooks 2161H631

Free Shipping

Fitment: C6 Corvette Z06 - (2006 - 2013)

Product Note: Street Headers are manufactured WITH Emissions Bungs

C6 Corvette Z06 Kooks 1-7/8 Long Tube Headers

C6 Corvette Z06 Kooks Headers 1-7/8" with High Flow Cats - Street. Manufactured with High Grade T304 Aircraft Quality Stainless Steel and Mandrel Bent for maximum performance. This C6 Corvette Z06 Long Tube Header System from Kooks features 1-7/8" inch primaries which dump into massive 3 inch race style collectors for peak Horsepower and Torque gains. All Kooks C6 Corvette Headers are machine TIG Welded using state of the art robots for a perfect balance un-restricted air flow.

Included in this C6 Corvette Z06 Kooks Long Tube Header Set is a X-Pipe with Kooks High Flow Catalytic Converters. This Header Set includes Emission Fittings and is intended for street use where allowed by law. The X-Pipe with High Flow Cats is a full 3" to hook up to Factory (OEM)" Axle Back Muffler Section. 

Included with your Kooks Long Tube Header System is a new set of Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Installing a set of Long Tube Headers will require an aftermarket tune

Kooks Headers and Exhaust has been a leader in aftermarket Corvette exhaust systems for over 50 years. All their products are backed by a limited lifetime warranty. Kooks 2161H421

Free Shipping

Fitment: C6 Corvette Z06 - (2006 - 2013)

Product Note: Street Headers are manufactured WITH Emissions Bungs

C6 Corvette Kooks 1-7/8 Long Tube Headers

C6 Corvette Kooks Headers 1-7/8" with High Flow Cats - Street. Manufactured with High Grade T304 Aircraft Quality Stainless Steel and Mandrel Bent for maximum performance. This C6 Corvette Long Tube Header System from Kooks features 1-7/8" inch primaries which dump into massive 3 inch race style collectors for peak Horsepower and Torque gains. All Kooks C6 Corvette Headers are machine TIG Welded using state of the art robots for a perfect balance un-restricted air flow.

Included in this C6 Corvette Kooks Long Tube Header Set is a X-Pipe with Kooks High Flow Catalytic Converters. This Header Set includes Emission Fittings and is intended for street use where allowed by law. The X-Pipe with High Flow Cats is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section. 

Included with your Kooks Long Tube Header System is a new set of Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Installing a set of Long Tube Headers will require an aftermarket tune

Kooks Headers and Exhaust has been a leader in aftermarket Corvette exhaust systems for over 50 years. All their products are backed by a limited lifetime warranty. Kooks 2160H421 and 2160H422

Free Shipping

Fitment: C6 Corvette Base and Grand Sport. LS2 and LS3 - (2005 - 2013)

Product Note: Street Headers are manufactured WITH Emissions Bungs

C6 Corvette Z06 Kooks 1-7/8 Long Tube Headers with Green Cats

C6 Corvette Z06 Kooks Headers 1-7/8" with Green Cats - Street. Manufactured with High Grade T304 Aircraft Quality Stainless Steel and Mandrel Bent for maximum performance. This C6 Corvette Z06 Long Tube Header System from Kooks features 1-7/8" inch primaries which dump into massive 3 inch race style collectors for peak Horsepower and Torque gains. All Kooks C6 Corvette Z06 Headers are machine TIG Welded using state of the art robots for a perfect balance un-restricted air flow.

Included in this C6 Corvette Z06 Kooks Long Tube Header Set is a center section X-Pipe with High Performance Green Cats. Green Cats are perfect for C6 Z06 Corvettes with high horsepower applications, like Turbo Charging, Supercharging or big CAM builds. This Header Set has Emission Fittings and is intended for street use where allowed by law. The X-Pipe is a full 3" to hook up to Factory (OEM)" Axle Back Muffler Section.

Included with your Kooks Long Tube Header System is a new set of Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Installing a set of Long Tube Headers will require an aftermarket tune

Kooks Headers and Exhaust has been a leader in aftermarket Corvette exhaust systems for over 50 years. All their products are backed by a limited lifetime warranty. Kooks 2161H431

Free Shipping

Fitment: C6 Corvette Z06 - (2006 - 2013)

Product Note: Street Headers are manufactured WITH Emissions Bungs

C6 Corvette Kooks 1-7/8 Long Tube Headers with Green Cats

C6 Corvette Kooks Headers 1-7/8" with Green Cats - Street. Manufactured with High Grade T304 Aircraft Quality Stainless Steel and Mandrel Bent for maximum performance. This C6 Corvette Long Tube Header System from Kooks features 1-7/8" inch primaries which dump into massive 3 inch race style collectors for peak Horsepower and Torque gains. All Kooks C6 Corvette Headers are machine TIG Welded using state of the art robots for a perfect balance un-restricted air flow.

Included in this C6 Corvette Kooks Long Tube Header Set is a center section X-Pipe with High Performance Green Cats. Green Cats are perfect for C6 Corvettes with high horsepower applications, like Turbo Charging, Supercharging or big CAM builds. This Header Set has Emission Fittings and is intended for street use where allowed by law. The X-Pipe is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section.

Included with your Kooks Long Tube Header System is a new set of Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Installing a set of Long Tube Headers will require an aftermarket tune

Kooks Headers and Exhaust has been a leader in aftermarket Corvette exhaust systems for over 50 years. All their products are backed by a limited lifetime warranty. Kooks 2160H432 and 2160H431

Free Shipping

Fitment: C6 Corvette Base and Grand Sport. LS2 and LS3 - (2005 - 2013)

Product Note: Street Headers are manufactured WITH Emissions Bungs

C6 Corvette Kooks 1-3/4 Long Tube Headers

C6 Corvette Kooks Headers 1-3/4" with Green Cats - Street. Manufactured with High Grade T304 Aircraft Quality Stainless Steel and Mandrel Bent for maximum performance. This C6 Corvette Long Tube Header System from Kooks features 1-3/4" inch primaries which dump into massive 3 inch race style collectors for peak Horsepower and Torque gains. All Kooks C6 Corvette Headers are machine TIG Welded using state of the art robots for a perfect balance un-restricted air flow.

Included in this C6 Corvette Kooks Long Tube Header Set is a X-Pipe with Kooks High Flow Catalytic Converters. This Header Set includes Emission Fittings and is intended for street use where allowed by law. The X-Pipe with High Flow Cats is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section. 

Included with your Kooks Long Tube Header System is a new set of Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Installing a set of Long Tube Headers will require an aftermarket tune

Kooks Headers and Exhaust has been a leader in aftermarket Corvette exhaust systems for over 50 years. All their products are backed by a limited lifetime warranty. Kooks 2160H221 and 2160H222

Free Shipping

Fitment: C6 Corvette Base and Grand Sport. LS2 and LS3 - (2005 - 2013)

Product Note: Street Headers are manufactured WITH Emissions Bungs

C6 Corvette Kooks 1-3/4 Long Tube Headers with Green Cats

C6 Corvette Kooks Headers 1-3/4" with High Flow Cats - Street. Manufactured with High Grade T304 Aircraft Quality Stainless Steel and Mandrel Bent for maximum performance. This C6 Corvette Long Tube Header System from Kooks features 1-3/4" inch primaries which dump into massive 3 inch race style collectors for peak Horsepower and Torque gains. All Kooks C6 Corvette Headers are machine TIG Welded using state of the art robots for a perfect balance un-restricted air flow.

Included in this C6 Corvette Kooks Long Tube Header Set is a center section X-Pipe with High Performance Green Cats. Green Cats are perfect for C6 Corvettes with high horsepower applications, like Turbo Charging, Supercharging or big CAM builds. This Header Set has Emission Fittings and is intended for street use where allowed by law. The X-Pipe is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section.

Included with your Kooks Long Tube Header System is a new set of Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Installing a set of Long Tube Headers will require an aftermarket tune

Kooks Headers and Exhaust has been a leader in aftermarket Corvette exhaust systems for over 50 years. All their products are backed by a limited lifetime warranty. Kooks 2160H231 and 2160H232

Free Shipping

Fitment: C6 Corvette Base and Grand Sport. LS2 and LS3 - (2005 - 2013)

Product Note: Street Headers are manufactured WITH Emissions Bungs

Kooks 21606700 C6 Corvette 3" Exhaust System

C6 Corvette Z06 - Kooks Axle Back Exhaust - 3.0 Inch.  Complete the Exhaust on your C6 Corvette Z06 or ZR1 with this Axle Back Exhaust from Kooks. Manufactured with high grade 16 gauge Stainless Steel. and finished with 4 inch Polished Stainless Steel Tips. This 3.0" Axle Back will mate directly to your Factory exhaust flanges or Kooks Long Tube Headers and X-Pipe. 21606700

Free Shipping

Fitment: C6 Corvette Z06 and ZR1 (2006 - 2013)

Product Note: Please allow 5 - 8 Business Days for manufacturing

Kooks 21606300 - C6 Corvette Exhaust System

C6 Corvette - Kooks Axle Back Exhaust - 2.5 Inch.  Complete the Exhaust on your C6 Corvette with this Axle Back Exhaust from Kooks. Manufactured with high grade 16 gauge Stainless Steel. and finished with 4 inch Polished Stainless Steel Tips. This 2.5" Axle Back will mate directly to your Factory exhaust flanges or Kooks Long Tube Headers and X-Pipe. 21606300 - 21606100

Free Shipping

Fitment: C6 Corvette Base and Grand Sport (2005 - 2013)

Product Note: Please allow 5 - 8 Business Days for manufacturing

C5 Corvette Spark Plug Wires

C5 Corvette Kooks Spark Plug Wires. Get the added protection you need with Long Tube Header with a set of Kooks Spark Plug Wires. Featuring high conductivity 11mm Wires (8 pc. Set) with Grey with Black Boots. 1997 - 2004 LS1 and LS6 V8 Engines with Coil Packs in OEM location. 11mm High temp Silicone insulation help these wires withstand the extra heat of High Performance builds. High Temp Silicone boots are angled 90 degrees at the coil pack end, and 45 degrees at the Spark Plug end to maximize clearance to headers. Trusted by just about every major racing organization on the planet, Kooks C5 Corvette Spark Plug wires are up to the test. (Add Spark Plug Heat Shield Boots)

Fitment: C5 Corvette Coupe, Convertible FRC and Z06 (1997, 1998, 1999, 200, 2001, 2002, 2003 and 2004)

Fitment: Fits applications with Stock Coil Pack Location

C5 Corvette Kooks 2 inch Long Tube Headers with Green Cats - 2150H630

C5 Corvette Kooks Headers 2" with High Flow Green Cats - Street. This Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance, and features Massive 2 inch primaries. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C5 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included in this C5 Corvette Kooks Long Tube Header Set is a center section X-Pipe with High Performance Green Cats. Green Cats are perfect for C5 Corvettes with high horsepower applications, like Turbo Charging, Supercharging or big CAM builds. This Header Set has Emission Fittings and is intended for street use where allowed by law. The X-Pipe is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section.

Each Kooks Long Tube Header System comes with New Gaskets, ARP Header Bolts and Torca Clamps. Bolt on a set of Kooks Headers on your C5 Corvette and let the fun begin. 2150H630

Kooks Headers and Exhaust has been a leader in aftermarket exhaust systems for over 50 years. They use only the finest T304 Air Craft Quality Stainless Steel, and all their products are backed by a limited lifetime warranty 

Free Shipping

Fitment: C5 Corvette and Z06 (1997 - 2004)

Product Note: Street Headers are manufactured WITH Emissions Bungs

C5 Corvette Kooks 1-7/8 Long Tube Headers with Green Cats

C5 Corvette Kooks Headers 1-7/8" with High Flow Green Cats - Street. This Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance, and features 1-7/8" inch primaries. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C5 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included in this C5 Corvette Kooks Long Tube Header Set is a center section X-Pipe with High Performance Green Cats. Green Cats are perfect for C5 Corvettes with high horsepower applications, like Turbo Charging, Supercharging or big CAM builds. This Header Set has Emission Fittings and is intended for street use where allowed by law. The X-Pipe is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section.

Each Kooks Long Tube Header System comes with New Gaskets, ARP Header Bolts and Torca Clamps. Bolt on a set of Kooks Headers on your C5 Corvette and let the fun begin. 2151H430 / 2152H430

Kooks Headers and Exhaust has been a leader in aftermarket exhaust systems for over 50 years. They use only the finest T304 Air Craft Quality Stainless Steel, and all their products are backed by a limited lifetime warranty 

Free Shipping

Fitment: C5 Corvette and Z06 (1997 - 2004)

Product Note: Street Headers are manufactured WITH Emissions Bungs

C5 Corvette 2150H420 Kooks 1-7/8 Long Tube Headers - No Emissions

C5 Corvette Kooks Headers 1-7/8" with Green Cats - Race. This Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance, and features 1-7/8" inch primaries. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C5 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included in this C5 Corvette Kooks 1-7/8 Long Tube Header Set is a center section X-Pipe with High Flow Green Cats. This Header Set DOES NOT HAVE Emission Fittings and is intended for off road use where allowed by law. The X-Pipe is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section.

Each Kooks Long Tube Header System comes with New Gaskets, ARP Header Bolts and Torca Clamps. Bolt on a set of Kooks Headers on your C5 Corvette and let the fun begin. 2150H430

Kooks Headers and Exhaust has been a leader in aftermarket exhaust systems for over 50 years. They use only the finest T304 Air Craft Quality Stainless Steel, and all their products are backed by a limited lifetime warranty 

Free Shipping

Fitment: C5 Corvette and Z06 (1997 - 2004)

Product Note: Race Headers are manufactured WITHOUT Emissions Bungs

C5 Corvette Kooks 1-3/4 Long Tube Headers

C5 Corvette Kooks Headers 1-3/4" with High Flow Cats - Street. This Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance, and features 1-3/4" inch primaries. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C5 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included in this C5 Corvette Kooks Long Tube Header Set is a center section X-Pipe with High Flow Cats. This Header Set has Emission Fittings and is intended for street use where allowed by law. The X-Pipe is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section.

Each Kooks Long Tube Header System comes with New Gaskets, ARP Header Bolts and Torca Clamps. Bolt on a set of Kooks Headers on your C5 Corvette and let the fun begin. 2151H220 / 2152H220

Kooks Headers and Exhaust has been a leader in aftermarket exhaust systems for over 50 years. They use only the finest T304 Air Craft Quality Stainless Steel, and all their products are backed by a limited lifetime warranty 

Free Shipping

Fitment: C5 Corvette and Z06 (1997 - 2004)

Product Note: Street Headers are manufactured WITH Emissions Bungs

C5 Corvette Kooks 1-3/4 Long Tube Headers with Green Cats

C5 Corvette Kooks Headers 1-3/4" with High Flow Green Cats - Street. This Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance, and features 1-3/4" inch primaries. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C5 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included in this C5 Corvette Kooks Long Tube Header Set is a center section X-Pipe with High Performance Green Cats. Green Cats are perfect for C5 Corvettes with high horsepower applications, like Turbo Charging, Supercharging or big CAM builds. This Header Set has Emission Fittings and is intended for street use where allowed by law. The X-Pipe is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section.

Each Kooks Long Tube Header System comes with New Gaskets, ARP Header Bolts and Torca Clamps. Bolt on a set of Kooks Headers on your C5 Corvette and let the fun begin. 2151H230 / 2152H230

Kooks Headers and Exhaust has been a leader in aftermarket exhaust systems for over 50 years. They use only the finest T304 Air Craft Quality Stainless Steel, and all their products are backed by a limited lifetime warranty 

Free Shipping

Fitment: C5 Corvette and Z06 (1997 - 2004)

Product Note: Street Headers are manufactured WITH Emissions Bungs

C5 Corvette 2150H230 Kooks 1-3/4 Long Tube Headers - No Emissions

C5 Corvette Kooks Headers 1-3/4" with Green Cats - Race. This Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance, and features 1-3/4" inch primaries. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C5 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included in this C5 Corvette Kooks Long Tube Header Set is a center section X-Pipe with High Flow Green Cats. This Header Set DOES NOT HAVE Emission Fittings and is intended for off road use where allowed by law. The X-Pipe is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section.

Each Kooks Long Tube Header System comes with New Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Bolt on a set of Kooks Headers on your C5 Corvette and let the fun begin. 2150H230

Kooks Headers and Exhaust has been a leader in aftermarket exhaust systems for over 50 years. They use only the finest T304 Air Craft Quality Stainless Steel, and all their products are backed by a limited lifetime warranty 

Free Shipping

Fitment: C5 Corvette and Z06 (1997 - 2004)

Product Note: Race Headers are manufactured WITHOUT Emissions Bungs

Kooks 21506300 C5 Corvette 3" Exhaust System

C5 Corvette - Kooks Axle Back Exhaust - 3.0 Inch.  Complete the Exhaust on your C5 Corvette with this Axle Back Exhaust from Kooks. Manufactured with high grade 16 gauge Stainless Steel. and finished with 4 inch Polished Stainless Steel Tips. This 3.0" Axle Back will mate to aftermarket 3.0" Exhaust Systems ONLY or Kooks Long Tube Headers and X-Pipe. 21506300. 

Free Shipping

Fitment: C5 Corvette and Z06 (1997 - 2004)

Product Note: Please allow 5 - 8 Business Days for Manufacturing