MBRP C8 Corvette Straight Pipes

C8 Corvette MBRP Cat Back Exhaust - Stingray. Look no further for one of the loudest exhaust systems on the market for the C8 Corvette Stingray. MBRP C8 Corvette Stingray Exhaust Systems take the rear engine sound to a whole new level. With over 20 years of exhaust manufacturing experience, the new MBRP Corvette Exhaust Systems for the C8 are everything you have come to expect from one of the world's leading manufacturers of performance exhaust systems. Each C8 Stingray Exhaust is specifically designed and engineered to fit your Corvette and comes with everything you need for a easy, no weld, and worry free installation.

MRBR C8 Corvette Straight Pipes are manufactured using the very best T-304 Stainless Steel and are Mandrel bent for maximum air flow. Not only will this system perform, but it looks good too. With Quad 4.5 inch Carbon Fiber Tips, the MBRP Corvette Exhaust will turn heads with its good looks and it deep, smooth Muscle Car Sound. This 3 inch C8 Corvette Exhaust System has a deep tone at idle and is about as loud as you can get at wide open throttle. Each system comes with a full set of instructions and everything you need for installation. This exhaust will not trigger CEL or require a tune. Improve the Performance, Sound and Style of your C8 Corvette Stingray with a MBRP Straight Pipe Exhaust System and enjoy Free Shipping on Us!

Free Shipping

Fitment: 2020, 2021, 2022, 2023, 2024 C8 Corvette Stingray

Product Note: Intended for Non-NPP Corvettes, will delete NPP on NPP cars

Magnaflow C8 Corvette XMOD Exhaust System

C8 Corvette Magnaflow XMOD Series Cat Back Exhaust 19578 - Stingray. Introducing the all new XMOD Series Cat Back Exhaust for the C8 Corvette. Designed and engineered for high performance and superior durability. This system will boost your performance by 12 horsepower and 13 foot pounds of torque, while enhancing the exhaust sound with Magnaflows signature deep tone. This performance minded kit features 3" mandrel bent high grade aircraft quality tubing, a true free flow crossover X-pipe, bi-mode exhaust valves, V-Band Clamps, new Heat Shields, Heat Wraps and 4.5" Chrome Tips. 

The Magnaflow C8 Corvette XMOD Exhaust System features swappable modules that allow you to tune the sound to your liking. The easily interchangeable pipes allow the owner to switch between the xTreme Delete Straight Pipes or the C8 specific muffler modules. Both modules feature the No Drone Technology (NDT) which cancel drone frequencies at cruising speeds. Each unit supports both NPP and Non-NPP C8 Corvette Stingrays and can be easily configured no matter which version of the stock exhaust that you Vette came with from the factory. 

Magnaflow 19578 comes with all necessary parts, hardware, and installation instructions for a complete install. It is custom-crafted specifically for your vehicle for a direct-bolt on installation, no welding or permanent vehicle modifications required. All Magnaflow products are proudly designed and manufactured in their 3000 square feet facility in Oceanside, California, USA. This XMOD Series CAT Back Exhaust System for C8 Corvette model is covered by a million-mile warranty.

Free Shipping

Product Note: This exhaust System is BUILT TO ORDER, Please allow 30 days for manufacturing

Fitment: C8 Corvette Stingray (2020, 2021, 2022, 2023 and 2024) With and Without NPP

Fitment: Includes NPP Valves

Magnaflow C8 Corvette XMOD Exhaust System

C8 Corvette Magnaflow XMOD Series Cat Back Exhaust 19545 - Stingray. Introducing the all new XMOD Series Cat Back Exhaust for the C8 Corvette. Designed and engineered for high performance and superior durability. This system will boost your performance by 12 horsepower and 13 foot pounds of torque, while enhancing the exhaust sound with Magnaflows signature deep tone. This performance minded kit features 3" mandrel bent high grade aircraft quality tubing, a true free flow crossover X-pipe, bi-mode exhaust valves, V-Band Clamps, new Heat Shields, Heat Wraps and 4.5" Black Chrome Tips. 

The Magnaflow C8 Corvette XMOD Exhaust System features swappable modules that allow you to tune the sound to your liking. The easily interchangeable pipes allow the owner to switch between the xTreme Delete Straight Pipes or the C8 specific muffler modules. Both modules feature the No Drone Technology (NDT) which cancel drone frequencies at cruising speeds. Each unit supports both NPP and Non-NPP C8 Corvette Stingrays and can be easily configured no matter which version of the stock exhaust that you Vette came with from the factory. 

Magnaflow 19545 comes with all necessary parts, hardware, and installation instructions for a complete install. It is custom-crafted specifically for your vehicle for a direct-bolt on installation, no welding or permanent vehicle modifications required. All Magnaflow products are proudly designed and manufactured in their 3000 square feet facility in Oceanside, California, USA. This XMOD Series CAT Back Exhaust System for C8 Corvette model is covered by a million-mile warranty.

Free Shipping

Product Note: This exhaust System is BUILT TO ORDER, Please allow 30 days for manufacturing

Fitment: C8 Corvette Stingray (2020, 2021, 2022, 2023 and 2024) With and Without NPP

Fitment: Includes NPP Valves

C8 Corvette Stingray Corsa Xtreme Exhaust System

C8 Corvette Corsa Xtreme Cat Back Exhaust 21106 with 4.5" Quad Pro-Series Tips, is 13dBs louder than stock and is offered in your choice of Polished or Black Tips. 

Pure Sound with No Restrictions

The Corsa Xtreme Cat Back Exhaust 21106 was created for the track. Track Series C8 CORSA Performance Cat Back exhaust systems was designed to eliminate restrictions, bring on the noise, and maximize weight savings. Each Cat-Back exhaust system was Track-Tested, resulting in being Dyno proven to maximize performance while producing up to 16 LBS Ft. of TQ. and 18 HP. Thus, 27 pounds were shaved from this stock exhaust system.

Features and specs included in this Cat-Back exhaust system:

• 18 horsepower - 16 torque
  
• Constructed with 3.0" 304 Stainless Steel
• AFM Machined - Valve simulator bracket.
• Louder than stock by 13 decibels
• 4.5" Twin Pro-Series Tips
• No Welding required
• Lifetime Warranty
• Mandrel Bent
• Includes Hardware & Detailed Instructions
• Manufactured in Ohio, USA
• Straight-through Design

C8 Corvette Corsa Xtreme Cat Back Exhaust 21106 system was designed for the 2020/2021/2022/2023/2024 C8 Chevy Corvette V8 6.2L. Actuator integration prevents CEL. Retains stock AFM Valve, but deletes NPP Control. 

All vehicle-specific CORSA products are designed and engineered to match the properties of vehicles they were specifically designed for, delivering perfect performance and fitment. In addition, Corsa branded exhaust systems come with a limited lifetime warranty that lasts for the time you own your vehicle. 

Fitment: C8 Corvette Stingray 2020, 2021, 2022, 2023 and 2024

Product Note: Retains AMF Valves, Eliminates NPP

C8 Corvette Stingray Corsa Xtreme Exhaust System

C8 Corvette Corsa Xtreme Cat Back Exhaust 21104 with 4.5" Quad Pro-Series Tips, is 13dBs louder than stock and is offered in your choice of Polished or Black Tips. 

Pure Sound with No Restrictions

The Corsa Xtreme Cat Back Exhaust 21104 was created for the track. Track Series C8 CORSA Performance Cat Back exhaust systems was designed to eliminate restrictions, bring on the noise, and maximize weight savings. Each Cat-Back exhaust system was Track-Tested, resulting in being Dyno proven to maximize performance while producing up to 16 LBS Ft. of TQ. and 18 HP. Thus, 27 pounds were shaved from this stock exhaust system.

Features and specs included in this Cat-Back exhaust system:

• 18 horsepower - 16 torque
• No Valve System
• Constructed with 3.0" 304 Stainless Steel
• AFM Machined - Valve simulator bracket.
• Louder than stock by 13 decibels
• 4.5" Twin Pro-Series Tips
• No Welding required
• Lifetime Warranty
• Mandrel Bent
• Includes Hardware & Detailed Instructions
• Manufactured in Ohio, USA
• Straight-through Design

C8 Corvette Corsa Xtreme Cat Back Exhaust 21104 system was designed for the 2020/2021 C8 Chevy Corvette V8 6.2L. Actuator integration prevents CEL. Deletes stock AFM Valve, but if you would like to keep AFM, you can use part #21102. Fits all NPP Corvettes & non-NPP Corvettes. However, to get the full use of NPP, use part #21103, or for NPP plus AFM, you can use part # 21100

All vehicle-specific CORSA products are designed and engineered to match the properties of vehicles they were specifically designed for, delivering perfect performance and fitment. In addition, Corsa branded exhaust systems come with a limited lifetime warranty that lasts for the time you own your vehicle. 

Fitment: C8 Corvette Stingray 2020, 2021, 2022, 2023 and 2024

Product Note: Eliminates AMF Valves, Eliminates NPP

C8 Corvette Corsa 3.0" Cat Back AFM with Quad 4.5" Tips 

The C8 Corvette Corsa Xtreme Cat Back Exhaust 21102 is used for the 2020 – 2021 C8 Chevrolet Corvette 6.2L V8 and fits both NPP and Non-NPP Corvettes while integrating directly with stock valve AFM actuator. For full valve usage, use Part # 21100. No Drone during 4 cylinder mode.

The C8 Corvette Corsa 3.0" Cat Back AFM with Quad 4.5" Tips has 13dBs louder than stock levels Xtreme Sound and the assembly of the Corsa AFM valve bolts to stock actuator motors directly. It should be used on Corvettes with AFM from the factory.

Corsa's Refined Track System

This exhaust system is like the Corsa Performance Track Series as it is made for those looking for an ultra-aggressive exhaust without resonance that can be caused by a 4 cylinder economy operation mode. Corsa's C8 AFM Only cat-back exhaust was manufactured to bring the noise, maximize weight savings, and eliminate restrictions while reducing the resonance you get from 4 cylinder mode. Offered in Polished Tips (21102) or Black Tips (21102BLK)

Each system underwent Track-Testing and was Dyno proven to perform at maximum capacity producing up to 16 LBS Ft. of Torque and 18 Horsepower. All while eliminating 25 lbs. from its stock exhaust system.

Features of the Corsa Performance C8 Cat-Back AFM include:

• 18 horsepower and 16 torque
• AFM Only Valve System
• 13 DBs. louder than stock
• 304 3.0" Stainless Steel Construction
• 5 Years Valves/ Lifetime Warranty
• Straight-through Design
• Mandrel Bent
• 4.5" Pro-Series Tips
• All Hardware and Instructions are Included
• Manufactured proudly in Berea, Ohio of the U.S.

Corsa recommends a professional perform the exhaust system installation. In addition, to get rid of the check engine light, some C8 exhausts may need a GM valve to relearn the sequence, because of the GM factory tolerances.

Fitment: C8 Corvette Stingray 2020, 2021, 2022, 2023 and 2024 

Product Note: Retains AMF Valves, Eliminates NPP

C8 Corvette Stingray Corsa Xtreme with NPP

 C8 Corvette Corsa Cat Back Exhaust 21103 – NPP is intended for the C8 Corvette Stingray V8 C8 6.2 L. This Cat Back exhaust directly integrates to Valve Actuator Stock NPP, this actuator integration prevents CEL and deletes the AFM stock valve, to keep this part, use Part #21100.

The Cat-Back 3.0" AFM Active Valve has an Xtreme Sound Level that provides 9dBs louder than Stock and 1dB quieter. CORSA NPP valve assembly directly bolts to stock actuator motors. It is intended for Corvettes with factory NPP.

V8 Sound Controlled

The C8 Corvette Stingray Corsa Xtreme exhaust system with NPP puts control at your fingertips. It allows you to maintain complete control of the C8 Corsa Corvette sound profile that is complete with fully functional CORSA Cast valves NPP that seamlessly integrate to the C8 stock actuators.

Each NPP system is louder by +9 DBs and quieter by -1 DB than the stock system and incorporates CORSA's proprietary RSC Technology offering a drone-free driving experience along with the 6.2L LT2 engine that releases assertive exhaust notes with heavy acceleration. The AFM valve — in this system — is replaced by a machined simulator bracket specifically engineered to prevent the AFM Check Engine Light. Thus, this C8 CORSA Cat-Back system is ideal for drivers who are aggressive and plan on driving in "Track Mode".

Features and Specs Include:

• 16 lbs lighter than stock
• 2 NPP Only Valve System
• Maintains all Sound Modes
• 16 torque and 18 horsepower
• +9 DBs. Louder / -1 DBs. quieter
• Valve Simulator Bracket AFM: Machined
• 304 Stainless Steel Construction
• Lifetime Warranty for 5 Years Valves
• Two 4.5" Pro-Series Tips
• Mandrel Bent
• *4 Cylinder Mode that may show light resonant frequencies
• Straight-through Design
• Manufactured in Berea, Ohio, USA
• Includes instructions and hardware

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray with NPP

Product Note: Retains NPP Valves, Eliminates AMF Valves

C8 Corvette Corsa Xtreme with NPP

C8 Corvette Corsa Cat Back Exhaust 21100 – NPP is an added bonus to the CORSA Performance Exhaust systems as it results in more power, less backpressure, greater fuel economy, and more.

What's Included with the NPP C8 Corvette exhaust system

The NPP C8 Corvette Corsa exhaust system is intended for the all new Stingray Chevrolet Corvette V8 C8 6.2L and is offered in your choice of Polished or Black pro-series tips that bring a fresh style to your Stingray. It also comes complete with an Xtreme Sound Level of 9dB louder and 1dB quieter than stock. This Corsa NPP valve assemblies direct bolt to stock actuator motors and provides maximum exhaust volume and tone control with four active valves. The C8 Corsa Cat Back Exhaust System also includes two NPP valves and two AFM valves to control volume and drone during throttle application and different drive modes, without provoking a check engine light.

The C8 Corvette Corsa Xtreme exhaust system is built tough as it's made of durable stainless steel to last for many years of use. Specifically designed to deliver a tuned sound, raised volume, and quality drone control, no matter what your exhaust settings are. The Fresh: C8 Corvette Corsa Cat Back Exhaust 21100 – NPP is the ultimate choice for any C8 Corvette enthusiast.

Features and Specs of the Corsa C8 Cat-Back Exhaust 21100

• Maintains all Sound Modes
• +9 Decibels Louder and -1 Decibel Quieter
• 4 Valve NPP and AFM System
• +18 Horsepower and 16 LBS of Torque
• Custom X-Pipe Design
• Two Pro-Series Polished Tips
• Patented Reflective, No-Drone, Sound Cancellation Technology
• Lifetime Warranty - 5 Years Valves
• 304 Stainless Steel Construction 3.0"
• Sharp Looking Exhaust
• No CEL
• Easy to Install Without Welding
• 2.5" Diameter Tubing
• Mandrel Bent
• Straight-through Design
• Converts Fumes Into Unharmful Gases
• All Detailed Instructions and Hardware Included
• Guaranteed Free From Defects for Workmanship and Material
• Manufactured in Berea, Ohio, USA

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray with NPP

Product Note: Uses stock AMF and NPP Valves

C8 Corvette Stingray Borla S-Type Carbon Fiber Exhaust

C8 Corvette Borla S-Type Exhaust 140838CF is built with you in mind. Massive 4 inch Carbon Fiber Tips offer a modern appearance. The S-Type offers a sound level delivers an assertive, yet balanced sound with a deep tone that matches up well to when you hear the sound from in the cockpit of your Corvette. The new C8 Corvette Stingray is designed like a modern jet fighter. The C8 is Military influenced and this system is built with that in mind, to provide a corresponding sound to go with the thrill from the cockpit of your Stingray.

The C8 Corvette Stingray Borla S-Type Carbon Fiber Exhaust provides an exciting interior and exterior experience without the drone you may have heard from other Corvette exhaust systems

The S-Type Exhaust design combines combustion pulses from both sides of the engine for improved performance and a custom sound. Polyphonic Harmonizer and SwitchFire™ technology use pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound.

Heat shielding is included to prevent exhaust damage and protect your new Corvette. The Stingray Borla S-Type Carbon Fiber Exhaust is constructed using aircraft quality T-304 stainless steel and is backed by a Borla’s Million Mile Warranty.

This C8 Corvette Borla S-Type Aftermarket Exhaust with Carbon Fiber Tips is the upgrade you have been looking and you will appreciate the high quality of Borla's precision manufacturing.  

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray 

Product Note: After installation of the C8 Corvette Stingray Borla ATAK Cat Back Exhaust, the controllers for the AFM and NPP valves in the exhaust system should be re-calibrated according to GM Document ID 5406413.

C8 Corvette Stingray Borla S-Type with Black Tips 

C8 Corvette Borla S-Type Exhaust 140838BC is built with you in mind. Massive 4 inch Black Tips offer an updated appearance. The S-Type sound level delivers an assertive, yet balanced sound with a deep tone that matches up well to when you hear the sound from in the cockpit of your Corvette. Enthusiast talk about the new C8 Corvette design being like a jet fighter, military aircraft-influenced and this system is built with that in mind, to provide a corresponding sound to go with the thrill from the cockpit of your Stingray.

The C8 Corvette Stingray Borla S-Type with Black Tips provides a more exciting driving experience without the drone you may have heard from other aftermarket exhaust systems

The S-Type Exhaust design blends combustion pulses from both sides of the engine for improved performance and a custom sound. Polyphonic Harmonizer and SwitchFire™ technology uses pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound.

Strategically placed heat shielding is included to prevent exhaust heat damage and protect your Corvette. The Stingray Borla S-Type Cat Back Exhaust is constructed using T-304 stainless steel and is backed by Borla's Million Mile Warranty.

This C8 Corvette Borla S-Type Aftermarket Exhaust is the upgrade you have been looking and you will appreciate the high quality of Borla's precision manufacturing.  

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray 

Product Note: After installation of the C8 Corvette Stingray Borla ATAK Cat Back Exhaust, the controllers for the AFM and NPP valves in the exhaust system should be re-calibrated according to GM Document ID 5406413.

C8 Corvette Stingray Borla S-Type Cat Back Exhaust 

C8 Corvette Borla S-Type Exhaust 140838 is built with you in mind. Massive 4 inch Chrome Tips offer a traditional OEM look. The S-Type sound level delivers an assertive, yet balanced sound with a deep tone that matches up well to when you hear the sound from in the cockpit of your Corvette. Enthusiast talk about the new C8 Corvette design being like a jet fighter, military aircraft-influenced and this system is built with that in mind, to provide a corresponding sound to go with the thrill from the cockpit of your Stingray.

The C8 Corvette Stingray Borla S-Type Cat Back Exhaust provides a more exciting driving experience without the drone you may have heard from other aftermarket exhaust systems

The S-Type Exhaust design blends combustion pulses from both sides of the engine for improved performance and a custom sound. Polyphonic Harmonizer and SwitchFire™ technology uses pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound.

Strategically placed heat shielding is included to prevent exhaust heat damage and protect your Corvette. The Stingray Borla S-Type Cat Back Exhaust is constructed using T-304 stainless steel and is backed by a Million Mile Warranty.

This C8 Corvette Borla S-Type Aftermarket Exhaust is the upgrade you have been looking and you will appreciate the high quality of Borla's precision manufacturing.  

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray 

Product Note: After installation of the C8 Corvette Stingray Borla ATAK Cat Back Exhaust, the controllers for the AFM and NPP valves in the exhaust system should be re-calibrated according to GM Document ID 5406413.

C8 Corvette Stingray Borla ATAK with Carbon Fiber Tips

C8 Corvette Borla ATAK Exhaust 140839CF is built with you in mind. Rumors began a few years back Chevrolet may go full performance with a mid-engine design with the C8. This presented engineers with unique challenges due to mid-engine movement. This model features the ATAK® sound level, Borla's most aggressive sound for Chevy's most aggressive Corvette to date.

C8 Corvette Stingray Borla ATAK with Carbon Fiber Tips designers utilized Polyphonic Harmonizer and SwitchFire™ technology matching pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound. Feel free to unleash the beast as the ATAK design truly blends the combustion pulses from both sides of the engine for improved performance and a custom sound.

Strategically placed heat shielding is included to prevent exhaust heat damage and protect your C8 Stingray Corvette. It comes with 4" dual Carbon Fiber Tips. The system is manufactured using aircraft quality T-304 stainless steel and is backed by Borla’s Million Mile Warranty.

This C8 Corvette Stingray Borla ATAK Cat Back Exhaust is the upgrade you have been looking if you want an aggressive sound. ATAK Exhaust 140839CF with carbon fiber tips.

Fitment: 2020, 2021, 2022, 2023 and 2024 Chevrolet Corvette (C8) 6.2L V8 Automatic Transmission Rear Wheel Drive 2 Door.

Product Note: After installation of the C8 Corvette Stingray Borla ATAK Cat Back Exhaust, the controllers for the AFM and NPP valves in the exhaust system should be re-calibrated according to GM Document ID 5406413.

C8 Corvette Stingray Borla ATAK Cat Back Exhaust 

C8 Corvette Borla ATAK Exhaust 140839BC is built with you in mind. Rumors began a few years back Chevrolet may go full performance with a mid-engine design with the C8. This presented engineers with unique challenges due to mid-engine movement. This model features the ATAK® sound level, Borla's most aggressive sound for Chevy's most aggressive Corvette to date.

C8 Corvette Stingray Borla ATAK Cat Back Exhaust designers utilized Polyphonic Harmonizer and SwitchFire™ technology matching pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound. Feel free to unleash the beast as the ATAK design truly blends the combustion pulses from both sides of the engine for improved performance and a custom sound.

Strategically placed heat shielding is included to prevent exhaust heat damage and protect your C8 Stingray Corvette. It comes with 4" dual rolled and angle cut Black Chrome tips. The system is manufactured using aircraft quality T-304 stainless steel and is backed by Borla’s Million Mile Warranty.

This C8 Corvette Stingray Borla ATAK Cat Back Exhaust is the upgrade you have been looking if you want an aggressive sound. ATAK Exhaust 140839BC with Black Chrome tips

Fitment: 2020, 2021, 2022, 2023 and 2024 Chevrolet Corvette (C8) 6.2L V8 Automatic Transmission Rear Wheel Drive 2 Door.

Product Note: After installation of the C8 Corvette Stingray Borla ATAK Cat Back Exhaust, the controllers for the AFM and NPP valves in the exhaust system should be re-calibrated according to GM Document ID 5406413.

C8 Corvette Stingray Borla ATAK Cat Back Exhaust 

C8 Corvette Borla ATAK Exhaust 140839 is built with you in mind. Rumors began a few years back Chevrolet may go full performance with a mid-engine design with the C8. This presented engineers with unique challenges due to mid-engine movement. This model features the ATAK® sound level, Borla's most aggressive sound for Chevy's most aggressive Corvette to date.

C8 Corvette Stingray Borla ATAK Cat Back Exhaust designers utilized Polyphonic Harmonizer and SwitchFire™ technology matching pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound. Feel free to unleash the beast as the ATAK design truly blends the combustion pulses from both sides of the engine for improved performance and a custom sound.

Strategically placed heat shielding is included to prevent exhaust heat damage and protect your C8 Stingray Corvette. It comes with 4" dual rolled and angle cut chrome tips. The system is manufactured using aircraft quality T-304 stainless steel and is backed by Borla’s Million Mile Warranty.

This C8 Corvette Stingray Borla ATAK Cat Back Exhaust is the upgrade you have been looking if you want an aggressive sound. ATAK Exhaust 140839 with chrome tips

Fitment: 2020, 2021, 2022, 2023 and 2024  Chevrolet Corvette (C8) 6.2L V8 Automatic Transmission Rear Wheel Drive 2 Door.

Product Note: After installation of the C8 Corvette Stingray Borla ATAK Cat Back Exhaust, the controllers for the AFM and NPP valves in the exhaust system should be re-calibrated according to GM Document ID 5406413.

C8 Corvette B&B Fusion Exhaust System

Upgrade your 2020-2025 C8 Corvette Stingray with the Billy Boat Fusion Exhaust System (FCOR-0700 / FCOR-0701), a premium performance exhaust designed to deliver an aggressive exhaust note, increased horsepower, and seamless integration with your vehicle’s Active Fuel Management (AFM) system. This high-quality system enhances both sound and aesthetics, making it an ideal upgrade for Corvette enthusiasts.

Aggressive Sound with Versatile Control

The Fusion Exhaust System is engineered to provide a deep, throaty growl under acceleration while maintaining a refined, drone-free tone during cruising. Featuring dual-mode exhaust valves, this system allows for adjustable sound levels, giving you full control over your Corvette’s exhaust note. Whether you want a bold roar on the track or a quieter ride for daily driving, this system offers the best of both worlds.

Premium Stainless Steel Construction

Built with T-304 stainless steel, the FCOR-0700 / FCOR-0701 ensures long-lasting durability, corrosion resistance, and optimal exhaust flow. The mandrel-bent tubing reduces backpressure, unlocking additional horsepower and torque for a more exhilarating driving experience. Each unit is handcrafted and TIG-welded for precision and strength, showcasing Billy Boat Exhaust’s commitment to quality and performance.

4.5” Stainless Steel Double-Wall Tips

The Fusion system comes with quad 4.5-inch double-wall tips, offering a bold, aggressive rear profile that complements the C8 Corvette’s modern design. These tips are designed to withstand extreme heat and environmental conditions, ensuring they maintain their look over time.

Seamless Integration with AFM & NPP Valves

This model is designed to work seamlessly with your Corvette’s Active Fuel Management (AFM) and NPP (dual-mode) exhaust valves. The integrated AFM valves maintain functionality while allowing for a smooth, uninterrupted exhaust flow, ensuring optimal performance whether you're in touring mode or pushing the limits on the track.

Key Features:

✔ Constructed from T-304 stainless steel for unmatched durability
✔ Mandrel-bent tubing for optimal exhaust flow and performance gains
✔ Deep, aggressive exhaust note with adjustable volume via NPP valves
✔ Quad 4.5” stainless steel double-wall Stainless Steel or Black Tips for a bold look
✔ AFM valve compatibility for seamless factory integration
✔ Bolt-on installation for precise fitment on 2020-2025 C8 Corvette models
✔ Limited Lifetime Warranty for peace of mind

Transform Your C8 Corvette with Billy Boat Fusion Exhaust

For Corvette owners seeking enhanced sound, power, and premium craftsmanship, the Billy Boat Fusion Exhaust System (FCOR-0700 / FCOR-0701) is the perfect choice.

🛒 Order now and unleash the full performance of your C8 Corvette Stingray!

Fitment: C8 Corvette Stingray (2020, 2021, 2022, 2023, 2024 and 2025)

Product Note: Please allow 2-4 Weeks for Manufacturing.

C8 Corvette B&B Bullet Exhaust System - with AFM

Upgrade your C8 Corvette Stingray (2020-2025) with the Billy Boat Bullet Exhaust System FCOR-0775 / FCOR-0776, engineered for maximum performance, aggressive sound, and seamless integration with the Active Fuel Management (AFM) system. Crafted from T-304 stainless steel, this premium exhaust enhances both the aesthetics and acoustics of your Corvette, delivering an unforgettable driving experience.

Unmatched Sound & Performance

Designed for true enthusiasts, the Bullet Exhaust System produces a deep, throaty growl, ensuring your C8 Corvette sounds as powerful as it looks. The mandrel-bent tubing optimizes exhaust flow, reducing backpressure and increasing horsepower.

Premium Stainless Steel Construction

Built to outlast and outperform, the FCOR-0775 / FCOR-0776 system is handcrafted using aircraft-grade T-304 stainless steel, offering superior durability, corrosion resistance, and performance longevity. Each system is TIG welded for precision and strength, ensuring a long-lasting, high-performance exhaust upgrade.

4.5” Stainless Steel Double-Wall Tips

The quad 4.5-inch double-wall tips provide a bold, aggressive look, seamlessly enhancing your Corvette’s rear profile. Designed to withstand high temperatures and harsh conditions, these tips maintain their pristine appearance over time.

AFM Valve Integration for Optimal Functionality

This model is equipped with AFM valve integration, ensuring compatibility with the Corvette’s fuel-saving technology while maintaining an uninterrupted exhaust flow and aggressive tone.

Key Features:

✔ Mandrel-bent T-304 stainless steel construction for durability and high performance
✔ Deep, aggressive sound for an exhilarating driving experience
✔ Quad 4.5” stainless steel or Black Tips
✔ AFM valve integration for smooth operation with factory settings
✔ Bolt-on installation with precision fitment for C8 Corvette models
✔ Limited Lifetime Warranty for peace of mind

Transform Your C8 Corvette Today

For drivers seeking enhanced performance, head-turning sound, and premium craftsmanship, the Billy Boat Bullet Exhaust System (FCOR-0775 / FCOR-0776) is the ultimate upgrade.

🛒 Order now and unleash the full potential of your C8 Corvette Stingray

Fitment: C8 Corvette Stingray (2020, 2021, 2022, 2023, 2024 and 2025)

Product Note: Please allow 2-4 Weeks for Manufacturing.

C8 Corvette B&B Bullet Exhaust System

Elevate your C8 Corvette Stingray's performance and sound with the Billy Boat Exhaust Bullet System - FCOR-0715 - FCOR-0716. Designed for Corvette enthusiasts seeking an aggressive exhaust note and enhanced horsepower, this system offers a perfect blend of style and functionality.

Aggressive Sound Profile

The Bullet Exhaust System is renowned for its deep, throaty exhaust note, providing a race-inspired sound that turns heads. Crafted for those who crave an assertive auditory presence, it delivers a commanding tone that enhances the driving experience.

High-Quality Construction

Constructed from T-304 stainless steel, this exhaust system ensures durability and resistance to corrosion. The mandrel-bent tubing allows for smooth exhaust flow, reducing backpressure and increasing horsepower. Each system is handmade and TIG welded, reflecting Billy Boat Exhaust's commitment to quality and performance.

Your Choice of Stainless Steel or Black Tips

Featuring 4.5-inch quad round, double wall tips, the system adds a sleek, aggressive aesthetic to your Corvette's rear profile. These tips not only enhance the visual appeal but also withstand high temperatures, maintaining their finish overtime.

No AFM Valve Integration

This specific model is designed without the Active Fuel Management (AFM) valve, catering to drivers who prefer a consistent exhaust flow and sound. By eliminating the AFM valve, the system provides an uninterrupted exhaust note and can contribute to performance gains.

Fitment

The FCOR-0715 / FCOR-0716 is compatible with 2020-2024 C8 Corvette Stingray models, ensuring a precise fit and seamless integration with your vehicle's existing systems.

Key Features:

• Material: High-grade T-304 stainless steel
• Design: Mandrel-bent tubing for optimal flow
• Tips: 4.5-inch quad round double wall
• Valve: No AFM valve
• Compatibility: 2020-2025 C8 Corvette Stingray
• Warranty: Limited Lifetime Warranty

Installation and Warranty

Professional installation is recommended to ensure optimal performance and fitment. Billy Boat Exhaust backs this system with a Limited Lifetime Warranty, reflecting their confidence in the product's quality and durability.

For C8 Corvette Stingray owners seeking an aggressive exhaust note, performance enhancement, and a stylish rear appearance, the Billy Boat Exhaust Bullet System FCOR-0715 / FCOR-0716 is an excellent choice. Its high-quality construction, distinctive black tips, and elimination of the AFM valve make it a standout upgrade for your Corvette.

Fitment: C8 Corvette Stingray (2020, 2021, 2022, 2023, 2024 and 2025)

Product Note: Please allow 2-4 Weeks for Manufacturing.

C8 Corvette AWE Exhaust System - Muffler Delete

Your C8 Corvette deserves the best sounding and most powerful exhaust on the planet. With its sophisticated bespoke asymmetric design, the C8 Corvette AWE Muffler Delete Exhaust will deliver AWE’s signature tone while improving horsepower gains throughout the RPM range. This performance exhaust went through rigorous testing in drag, road-course, and long-term street environments to ensure that it will unlock your engine’s full power potential. C8 Corvette AWE Track Edition Exhaust system has been dyno-tested to produce maximum power gains of up to 19 hp and 15 lbs.-ft torque at the wheels.

This cat-back C8 Corvette Muffler Delete Exhaust System is hand-crafted from 0.65 in. walled T304L stainless steel that is superior in strength and durability but weighs so much lighter than your stock system. This track edition kit offers up to 39 lbs. in weight savings compared to the factory set up. They feature CNC-machined mandrel bends, optimized pipe diameters, and a straight-through design allowing smoother, faster exhaust flow for maximum performance and improved throttle response. The C8 Corvette Muffler Delete Exhaust System is built with rigid 8 in. internally lined stainless steel flex sections that work great in isolating engine movement for life-long reliability. This powerful system exits in quad 4.5 in. double-walled slash cut tips that comes in Chrome Silver finish (part number 3020-42080) or Diamond Black finish (part number 3020-43086) for the added stealth looks.

The Track Edition Cat-back exhaust system is supplied with AWE AFM valve stimulators, premium quality aluminum heat shield, and installation instructions. This kit is designed for a hassle-free direct bolt-on installation, no cutting or modifications required. It does not affect factory emissions equipment. The C8 Corvette AWE Cat-back Exhaust system is proudly engineered, manufactured, and astringently tested in AWE’s Pennsylvania, USA facility. It comes with AWE’s perfect fitment guarantee, No CEL guarantee, and limited lifetime warranty.

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray Coupe and Convertible

C8 Corvette AWE Exhaust System

AWE tuning combined aggression and sophistication with their Touring Edition Exhaust System! This performance package offers the most aggressive sound and performance in a sophisticated design perfect for your Vette. This kit went through rigorous testing including road-course, drag, and street environments to guarantee powerful and consistent performance in any driving condition. C8 Corvette AWE Touring Edition Exhaust have been dyno-tested to generate maximum power gains of up to 19 hp and 15 lbs-ft. of torque.

C8 Corvette AWE Touring Edition Exhaust system features AWE Tuning’s patented 180 technology Drone-canceling solution responsible for the deep, aggressive exhaust note without the dreadful drone when driving on highway speed. Because the 180 technology is controlled by your driving style, you get to enjoy the exotic loud soundtrack when driving fast or the quiet cabin comfort when cruising. The C8 Corvette AWE Exhaust System is made for maximum strength with its solid T304L stainless steel construction while offering 31 lbs. in weight savings compared to stock. The handcrafted 3 in. mandrel bent pipes with 0.65 in. wall combined with the straight through design significantly eliminate restrictions allowing smoother and faster flow of exhaust gases resulting to superior power gains and impressive performance. This Touring edition C8 Corvette AWE Exhaust System has tough 8 in. flex sections with stainless steel internal linings that diminish engine movements for improved durability. C8 Corvette AWE Cat-back Exhaust ends in massive quad 4.5 in. double-walled slash cut tips that comes in a striking Chrome Silver finish (part number 3015-42151) and stealth-looking Diamond Black finish (3015-43159).

It is supplied with AFM valve stimulators, high quality aluminum heat shield, and installation instructions. Designed for an easy direct-bolt on installation, no cutting or modifications necessary. This performance exhaust will not affect your vehicle’s factory emissions equipment. This kit is proudly engineered and manufactured in-house in AWE’s Pennsylvania USA facility, using all-American made materials. This Touring Edition C8 Corvette Cat-Back system comes with AWE’s perfect fit guarantee, No CEL guarantee, and lifetime warranty.

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray Coupe and Convertible

C8 Corvette Stingray ARH Exhaust System 

Take your Stingray to the next level with a C8 Corvette American Racing Headers R/T Cat Back Exhaust. Born from a legendary line of Corvette Exhaust systems, this cat back will not disappoint. You can bet that every bit of their 40 plus years of exhaust fabrication experience went into the design and engineering of this system for the all new C8 Stingray.

Why American Racing Headers? They are not in the business of making exhaust systems, they are in the business of making Horsepower. Look at just about any form of motorsports and you can see ARH is represented by their customer winning Championships and setting records along the way. The skilled fabricators at ARH are not only craftsman, but racers and street enthusiasts. 

Each C8 Corvette Stingray ARH Exhaust System is proudly manufactured and sourced with High Grade Aircraft quality T304 Stainless Steel. All systems are mandrel bent and tested for maximum performance with no drone, Offered in your choice of Polished Stainless Steel or Black Powder Coated tips We often get asked "What Exhaust System sound sounds best on the C8 Corvette Stingray," and the answer is ARH. The C8 Corvette American Racing Headers R/T Cat Back Exhaust eliminates the NPP Valves so you can get the true sound of your Stingray throughout the entire RPM range. The C8 ARH Exhaust System was designed and tested to give you a drone free sound experience that lets you control the exhaust volume with the gas pedal. Give the gas pedal a slight push and you get a tuned performance sound, mash it to the floor and you get a sound only reserved for an IMSA track. 

Each ARH Cat Back Exhaust comes with everything you need for a complete installation that will transform your C8 Corvette Stingray.

Free Shipping

Fitment: C8 Corvette Stingray (2020, 2021, 2022, 2023 and 2024)

Product Note: Eliminates NPP Valves

Akrapovic Slip on Exhaust S-CO/TI/3 - C8 Corvette Stingray

C8 Corvette Akrapovic Exhaust System - Slip-On - Stingray - NPP.  This Akrapovic Exhaust System has been designed and engineered to deliver unrelenting performance, amazing sound and no compromise comfort for your Stingray Corvette. 

Manufactured with the highest grade Titanium and fully insulated to prevent any excess heat from damaging other engine parts or making its way into the cabin. The right and left connecting tubes are different diameters to increase stiffness and enhance the overall sound experience. Finished with twin right and left Titanium tips with a black interior, this C8 Corvette Akrapovic Exhaust System checks all the boxes. 

The Akrapovic Slip on Exhaust for the C8 Corvette Stingray provides a traditional V8 throb at low RPMs which evolves into a rich roar as the RPM rise. This exhaust systems weighs in at a whopping forty seven percent lighter than the OEM system and provides and additional 8.0 Horsepower and 15.6 foot pounds of torque. The C8 Corvette Akrapovic Slip on Exhaust System will not require remapping or an aftermarket tune. Upgrade your system with an optional set of fully insulated high flow cats or cat by-pass pipe.  

Perfectly designed and engineered to fit your Stingray Corvette. Crafted from the best Titanium and aircraft grade stainless steel, this system is a direct fit and will mate to your OEM Exhaust Pipes without modification to your C8 Corvette. The Slip-On System operates with NPP Valves that allow for full operation of your driver select exhaust volume. C8 Corvette Stingray Akrapovic Slip-On Exhaust System S-CO/TI/3. 

Free Shipping

Fitment: C8 Corvette Stingray 2020, 2021, 2022, 2023 and 2024 With NPP Exhaust

Product Note: Will Not Fit C8 Corvette Z06

C8 Corvette Muffler Delete Exhaust System

The C8 Corvette aFe Muffler Delete Exhaust System - Black Tips. Let your Stingray breathe with this Muffler delete exhaust system from advanced Flow engineering. Manufactured to be the loudest exhaust system for the C8 Corvette, aFe Power utilized only the most advanced CAD technology for its race-proven design and incorporated the finest stainless steel for a lifetime of satisfaction. If you’re thinking of dumping your restrictive set up, this is the best upgrade your money can buy.

This C8 Corvette Muffler Delete Cat Back Exhaust utilizes 3 inch – 2-1/2 inch mandrel bent T-304 solid, austenitic 304 stainless steel for unrivaled strength, harmonic balance  and long-lasting durability. The muffler delete design unleashed more HP/TQ while producing a drone free, crisp, aggressive exhaust note. This C8 Corvette aFe Muffler Delete Exhaust System is built with a mitered merge x-pipe that evenly distributes exhaust pulses across the entire system to maximize scavenging and reduce drone. The entire kit is 100% TIG welded and features heavy duty interlock flex pipe for greater strength and reliability. As the finishing touch, the pipes exit into massive quad 4 ½ inch polished stainless steel tips. aFe Power part number 49-34127NM-B is intended for vehicles without NPP dual mode exhaust valves. For applications with NPP valves, the dual mode exhaust valves will be eliminated.

C8 Corvette Muffler Delete Exhaust System is designed to be an exact fit for your Stingray. It uses all the same factory style flanges and hangers so there is no welding, cutting or permanent modification required. Included is all the necessary hardware and a full set of step by step instructions for an easy installation. AFE 49-34127NM-P includes factory style exhaust valves that uses the factory motor, (not included). All AFE performance parts and accessories are manufactured in their Corona, California, USA facility. AFE Mach-Force XP systems are backed by a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette AFE Mach Force Exhaust System

The Mach-Force series C8 Corvette aFe Mach Force Exhaust System is the most powerful, best looking, and best aftermarket replacement for your restrictive factory exhaust. Designed using only cutting-edge CAD technology and built with T-304 stainless steel, this kit will surely outperform competition in sound, strength, and performance gains.

The C8 Corvette aFe Muffler Delete Exhaust System - Carbon Fiber Tips is constructed for maximum strength and durability using 3”- 2-1/2” 304 grade stainless steel pipes with brushed finish. Featuring very smooth and precision-diameter mandrel bends, this system greatly reduces restrictions, improves engine efficiency, and produces more horsepower and torque than competition. The muffler delete design offers a very aggressive, performance growl without the obnoxious drone for a crisp, clean sound of power when you hit the gas. This C8 Corvette aFe Mach Force Exhaust System features an integrated mitered merge x-pipe that works great at balancing and distributing the exhaust pulses throughout the system to maximize scavenging and minimize droning. Utilizing the most advanced CAD technology and precision TIG welding, this system delivers race-proven design, powerful performance, and high-tolerance factory fitment. This C8 Corvette Cat Back System has an interlock flex pipe that adds more strength and durability. The kit finishes off in massive 4-1/2” quad carbon fiber stainless steel clamp-on tips with a laser-etched aFe Power logo for the authentic and aggressive styling. aFe Power part number 49-34127NM-C is specifically designed for vehicles without NPP dual mode exhaust valves. For vehicles equipped with NPP valves, the dual mode exhaust valves will be eliminated.

This kit comes with all necessary hardware and step-by-step installation instructions for a hassle-free install. The aFe Power Muffler Delete Cat Back System is designed for a custom fit, bolt-on installation using factory style flanges and hangers, without cutting or modifications required. It comes with factory style exhaust valves using factory motor, not included in the kit. This C8 Corvette aFe Muffler Delete Exhaust System - Carbon Fiber Tips is proudly designed and manufactured in their Corona, California, USA facility and comes with a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette AFE Exhaust System

The C8 Corvette aFe Muffler Delete Exhaust System - Black Tips is built to offer powerful strength, sound, and performance. aFe Power utilized only the most innovative CAD technology for its race-proven design and the finest stainless steel for its robust construction. If you’re thinking of dumping your restrictive set up, this is the best upgrade your money can buy.

This Cat-back C8 Corvette AFE Exhaust System features 3” – 2-1/2” mandrel bent pipes made from solid, austenitic 304 stainless steel for unrivaled strength and long-lasting durability. The muffler delete design will unleash more horsepower and torque while producing crisp, aggressive exhaust note without droning. This C8 Corvette aFe Muffler Delete Exhaust System - Black Tips is built with a mitered merge x-piper that evenly distributes and balances exhaust pulses across the entire system to optimize scavenging and diminish drone. The entire kit is 100% TIG welded and features heavy duty interlock flex pipe for greater strength and reliability. As the finishing touch, the pipes exit into massive quad 4 ½ in. stainless steel tips with black metallic finish laser etched with the aFe Power logo for the stealth look. aFe Power part number 49-34127NM-B is intended for vehicles without NPP dual mode exhaust valves. For applications with NPP valves, the dual mode exhaust valves will be eliminated.

C8 Corvette AFE Exhaust System is precision designed for a custom, high tolerance fitment on your vehicle. It uses factory style flanges and hangers for a secure fit, no welding or modification required. The kit includes all necessary hardware and comprehensive instructions for a complete and easy install. AFE 49-34127NM-B includes factory style exhaust valves (using factory motor, not included). All AFE performance parts and accessories are manufactured in their Corona, California, USA facility. AFE Mach-Force XP systems are backed by a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette 49-34124-P AFE Exhaust System

Add power and performance to your C8 Corvette Stingray with an aFe Mach Force XP Exhaust System. The power-boosting abilities of this Cat-back C8 Corvette Stingray AFE Exhaust System starts with premium quality its 3”-2-1/2” mandrel bent 304 stainless steel tubing with brushed finish. Built with very robust construction with the smooth mandrel bends to reduce restrictions, your new V8 will get massive exhaust flow, greatest performance gains, and improved engine efficiency. This C8 Corvette aFe Mach Force-Xp Exhaust System - Polished Tips also produces a powerful sound that unleashes more horsepower and torque with its high-temperature, high-flow muffler. The loud and crisp performance growl produced by the AFE muffler does not come with the annoying drone because of the integrated X-pipe that balances and equally distributes pulses throughout the system.  The AFE muffler features a black metallic finish that does not just add a stealth-look but also protects against corrosion damage. This AFE Mach-Force Cat Back System for the C8 Corvette features a heavy duty interlocking flex pipe for added durability and strength. This kit ends in a massive 4-1/2 in. quad stainless steel clamp-on Polished tips with a laser-etched aFe Power logo for great authentic style. AFE 49-34124-P is designed to fit vehicles with NPP dual mode exhaust valves only. The NPP valves comes with the Z51 performance package or the factory performance exhaust option.

The C8 Corvette Stingray AFE Exhaust System was manufactured as a direct-bolt on installation to your C8 Corvette Stingray, using factory style flanges and hangers, no cutting or modifications required. It comes with factory style exhaust valves using factory motor, not included in the kit. This product comes with a limited 2-year warranty. 

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette AFE Exhaust System

C8 Corvette aFe Mach Force-Xp Exhaust System - Carbon Fiber Tips is a great performance upgrade for your restrictive factory setup. This high quality exhaust kit is exactly what your Corvette needs to achieve increased flow, powerful sound, more horsepower, torque and improved performance. This C8 Corvette AFE Exhaust System is dyno-tested in-house and produced up to 9 HP and 10 lbs./ft torque in performance gains.

The Mach Force-XP system is built of 3” – 2-1/2” mandrel bent 304 grade stainless steel pipes for extreme strength and reliable performance. This cat-back exhaust is crafted using the latest in CAD technology and then TIG welded for the custom fit and race-proven design. The brushed finish adds more durability, sleek look, and maximum corrosion resistance. It features a stealth looking high-flow muffler that unleashes trapped horsepower and produces crisp, clean tone resounding power while minimizing drone. The AFE muffler comes with an integrated X-pipe that effectively balances and equally distributes pulses throughout the entire system, resulting to diminished drone and maximum scavenging abilities. This muffler is finished with a high-temperature metallic black coating for long-lasting durability. For more strength and durability, the C8 Corvette aFe Mach Force-Xp Exhaust System - Carbon Fiber Tips utilize a robust flex pipe with internal interlock liner. AFE 49-34124-C only fits C8 Corvettes with NPP dual mode exhaust valves, included in the factory performance exhaust option and the Z51 performance package. It uses factory style valves (using factory motor, not included).

The C8 Corvette AFE Exhaust System is supplied with all necessary hardware and step-by-step installation instructions for a complete install. This direct bolt-on system utilizes the factory style flanges and hangers for a hassle-free installation, no welding or any modification required. All AFE products are never outsourced, they are proudly designed and manufactured in Corona, California, USA. This aFe Mach Force-Xp Exhaust System for the C8 Corvette is backed by a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette Stingray AFE Exhaust System

aFe Power utilized the latest in CAD technology and only the highest quality metal construction to offer the race-proven design and superior performance of the C8 Corvette aFe Mach Force-Xp Exhaust System - Black Tips. The in-house experts at AFE dyno-tested this C8 Corvette exhaust upgrade and has proven to produce up to additional 9 HP and 10 lbs./ft. torque.

The power-boosting abilities of this Cat-back C8 Corvette Stingray AFE Exhaust System starts with premium quality its 3”-2-1/2” mandrel bent 304 stainless steel tubing with brushed finish. Built with very robust construction with the smooth mandrel bends to reduce restrictions, your new V8 will get massive exhaust flow, greatest performance gains, and improved engine efficiency. This C8 Corvette aFe Mach Force-Xp Exhaust System - Black Tips also produces a powerful sound that unleashes more horsepower and torque with its high-temperature, high-flow muffler. The loud and crisp performance growl produced by the AFE muffler does not come with the annoying drone because of the integrated X-pipe that balances and equally distributes pulses throughout the system.  The AFE muffler features a black metallic finish that does not just add a stealth-look but also protects against corrosion damage. This AFE Mach-Force Cat Back System for the C8 Corvette features a heavy duty interlocking flex pipe for added durability and strength. This kit ends in a massive 4-1/2 in. quad stainless steel clamp-on tips with a laser-etched aFe Power logo for great authentic style. AFE 49-34124-B is designed to fit vehicles with NPP dual mode exhaust valves only. The NPP valves comes with the Z51 performance package or the factory performance exhaust option.

The C8 Corvette Stingray AFE Exhaust System is designed for a direct-bolt on installation to your C8 Corvette, using factory style flanges and hangers, no cutting or modifications required. It comes with factory style exhaust valves using factory motor, not included in the kit. This product comes with a limited 2-year warranty. All AFE Power performance parts are proudly designed and manufactured in their Corona, California, USA facility.

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C7 Corvette MBRP Exhaust System S7030304

MBRP Performance S7030304 C7 Corvette Exhaust System - Polished. For the hottest sound on the market right now, look no further than the MBRP C7 Corvette Stingray Exhaust Systems. This new entry from the legendary MBRP is flying off the shelves. With over 20 years of exhaust manufacturing experience, the new MBRP Corvette Exhaust Systems for the C7 are everything you have come to expect from one of the worlds leading manufacturers of performance exhaust systems. Each Stingray and Grand Sport Corvette Exhaust System is specifically designed and engineered to fit your Stingray Corvette and comes with everything you need for a easy, no weld, and worry free installation.

This C7 Corvette Exhaust System is manufactured using the very best T-304 Stainless Steel and is Mandrel bent for maximum air flow. The net gains are 13 Horsepower and 8 FT/LB of Torque. Not only will this system preform, but it looks good too. Featuring Polished Stainless Steel and Quad 4 inch Duel Walled Tips, the MBRP Corvette Exhaust will turn heads with its good looks and it deep, smooth Muscle Car Sound. This 3" C7 Corvette Exhaust System will quite down nicely at cursing speeds, allowing you to have a conversation, listen to music or have a conversation, but once you step on the gas, it comes alive with a deep muscle car sound that rises slightly as the RPMs go up. Improve the Performance, Sound and Style of your C7 Corvette Stingray with a MBRP Exhaust System and enjoy Free Shipping on Us!

Free Shipping

Fitment: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette Stingray 

Fitment: WILL NOT fit C7 Corvettes with NPP Exhaust

C7 Corvette MBRP Exhaust System Black Tips S7030BLK

MBRP Performance S7030BLK C7 Corvette Exhaust System - Black. For the hottest sound on the market right now, look no further than the MBRP C7 Corvette Stingray / Grand Sport Exhaust Systems. This new entry is flying off the shelves. With over 20 years of exhaust manufacturing experience, this new Corvette Exhaust Systems for the C7 is everything you have come to expect from one of the worlds leading manufacturers of performance exhaust systems. Each C7 Corvette Exhaust System is specifically designed and engineered to fit your Stingray Corvette and comes with everything you need for a easy, no weld, and worry free installation.

The C7 Corvette MBRP Exhaust System is manufactured using the very best T-304 Stainless Steel and is Mandrel bent for maximum air flow. The net gains are 13 Horsepower and 8 FT/LB of Torque. Not only will this system preform, but it looks good too. Featuring a Black Finish that is designed to reduce heat and Quad 4 inch Black Tips, the 3" Exhaust will turn heads with its good looks and it deep, smooth Muscle Car Sound. This MBRP C7 Corvette Exhaust will quite down nicely at cursing speeds, allowing you to have a conversation, listen to music or have a conversation, but once you step on the gas, it comes alive with a deep muscle car sound that rises slightly as the RPMs go up. Improve the Performance, Sound and Style of your C7 Corvette Stingray with a MBRP Exhaust System and enjoy Free Shipping on Us!

Free Shipping

Fitment: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette Stingray and Grand Sport

Fitment: WILL eliminate adjustable sound control on NPP equipped cars

Magnaflow C7 Corvette Stingray NPP Exhaust

Magnaflow Exhaust Systems are famous for their sound, power, and performance. They took these three things to higher levels with the NEO Series NPP Exhaust for the C7 Corvette. It is the best looking exhaust that will unleash your vehicle’s full potential with bigger pipe diameters and solid construction. This C7 Corvette Magnaflow NEO Series Exhaust offers the distinctive, powerfully deep, aggressive sound that is sure to catch everybody’s attention. With the Magnaflow performance sound, it will give your Chevy C7 Corvette the aggressive growl a muscle car deserves. Magnaflow C7 Corvette Stingray NPP Exhaust is the best sounding solution for Corvette drivers looking for reduced mass, increased power, and great styling all in one package.

 The power, sound, and performance of the C7 Corvette Magnaflow NEO Series Exhaust begin from its solid stainless steel mufflers with straight through design. Without obstructions and chambers, there is maximum flow of gases through the mufflers for maximum power. These high performance mufflers have built-in acoustical absorbing materials that eliminate harsh noise and vibrations to achieve the throaty growl. Magnaflow C7 Corvette Stingray NPP Exhaust has robotic welded and mandrel bent tubes that diminish restrictions and support the smoothest exhaust flow. The 409 stainless steel axle-back system is polished to a mirror finish for great looks and rust protection. Magnaflow part number 19581 features 3 in. diameter pipes and quad 4.5 in. rolled edge, double wall 304 Black Chrome stainless steel tips.

 Magnaflow 19581 comes with all necessary parts, hardware, and installation instructions for a complete install. It is custom-crafted specifically for your vehicle for a direct-bolt on installation, no welding or vehicle modifications required. All Magnaflow products are proudly designed and manufactured in their 3000 square feet facility in Oceanside, California, USA. This NEO Series Axle Back Exhaust System for C7 Corvette models is covered by a million-mile warranty.

Free Shipping

Fitment: C7 Corvette Stingray (2014, 2015, 2016 2017, 2018 and 2019) With AFM and With and Without NPP

Fitment: Includes NPP Valve ByPass

Magnaflow C7 Corvette Grand Sport NPP Exhaust

Magnaflow Exhaust Systems are famous for their sound, power, and performance. They took these three things to higher levels with the NEO Series NPP Exhaust for the C7 Corvette. It is the best looking exhaust that will unleash your vehicle’s full potential with bigger pipe diameters and solid construction. This C7 Corvette Magnaflow NEO Series Exhaust offers the distinctive, powerfully deep, aggressive sound that is sure to catch everybody’s attention. With the Magnaflow performance sound, it will give your Chevy C7 Corvette the aggressive growl a muscle car deserves. Magnaflow C7 Corvette Grand Sport NPP Exhaust is the best sounding solution for Corvette drivers looking for reduced mass, increased power, and great styling all in one package.

 The power, sound, and performance of the C7 Corvette Magnaflow NEO Series Exhaust begin from its solid stainless steel mufflers with straight through design. Without obstructions and chambers, there is maximum flow of gases through the mufflers for maximum power. These high performance mufflers have built-in acoustical absorbing materials that eliminate harsh noise and vibrations to achieve the throaty growl. Magnaflow C7 Corvette Grand Sport NPP Exhaust has robotic welded and mandrel bent tubes that diminish restrictions and support the smoothest exhaust flow. The 409 stainless steel axle-back system is polished to a mirror finish for great looks and rust protection. Magnaflow part number 19581 features 3 in. diameter pipes and quad 4.5 in. rolled edge, double wall 304 Black Chrome stainless steel tips.

 Magnaflow 19581 comes with all necessary parts, hardware, and installation instructions for a complete install. It is custom-crafted specifically for your vehicle for a direct-bolt on installation, no welding or vehicle modifications required. All Magnaflow products are proudly designed and manufactured in their 3000 square feet facility in Oceanside, California, USA. This NEO Series Axle Back Exhaust System for C7 Corvette models is covered by a million-mile warranty.

Free Shipping

Fitment: C7 Corvette Grand Sport (2017 to 2019) With AFM and With and Without NPP

Fitment: Includes NPP Valve ByPass

C7 Corvette Z06 Hooker 70501352-RHKR

70501352-RHKR Hooker BlackHeart Race Exhaust - No Cats - C7 Corvette Z06. Add that classic Hooker sound to your C7 Corvette Z06 with the Hooker BlackHeart Race Exhaust System. Designed to mate specifically with Hooker Long Tube Headers ONLY. Manufactured with 3" 18 gauge 304 Stainless Steel and Cat Elimination Center Section and straight through dual path mufflers. This Hooker Z06 Exhaust System offers a mellow throaty tone when the valves are closed and an aggressive race tone when the valves are open. 4" quad round polished tips with etched BlackHeart Logo. All hardware needed for installation included.

Fitment: C7 Corvette Z06 (2015 to Current) With NPP Exhaust.

Fitment: Mates to Hooker Long Tube Headers ONLY

Product Note: Please allow 7-10 Business Days for Manufacturing

C7 Corvette Stingray Hooker Race Exhaust 70501352-RHKR

70501352-RHKR Hooker BlackHeart Race Exhaust - No Cats - C7 Corvette Stingray. Add that classic Hooker sound to your C7 Corvette with the Hooker BlackHeart Race Exhaust System. Designed to mate specifically with Hooker Long Tube Headers ONLY. Manufactured with 3" 18 gauge 304 Stainless Steel and Cat Elimination Center Section and straight through dual path mufflers. This Hooker Stingray Exhaust offers a mellow throaty tone when the valves are closed and an aggressive race tone when the valves are open. 4" quad round polished tips with etched BlackHeart Logo. All hardware needed for installation included.

Fitment: C7 Corvette Stingray (2014 to Current) With NPP Exhaust.

Fitment: Mates to Hooker Long Tube Headers ONLY

Product Note: Will not fit C7 Corvette Z06

Product Note: Please allow 7-10 Business Days for Manufacturing

C7 Corvette Grand Sport Hooker 70501352-RHKR

70501352-RHKR Hooker BlackHeart Race Exhaust - No Cats - C7 Corvette Grand Sport. Add that classic Hooker sound to your C7 Corvette with the Hooker BlackHeart Race Exhaust System. Designed to mate specifically with Hooker Long Tube Headers ONLY. Manufactured with 3" 18 gauge 304 Stainless Steel and Cat Elimination Center Section and straight through dual path mufflers. This Hooker Grand Sport Exhaust System offers a mellow throaty tone when the valves are closed and an aggressive race tone when the valves are open. 4" quad round polished tips with etched BlackHeart Logo. All hardware needed for installation included.

Fitment: C7 Corvette Grand Sport (2017 to Current) With NPP Exhaust.

Fitment: Mates to Hooker Long Tube Headers ONLY

Product Note: Please allow 7-10 Business Days for Manufacturing

C7 Corvette Muffler Delete

70401320-RHKR Hooker BlackHeart Axle Back Exhaust - C7 Corvette Stingray, Grand Sport or Z06. Add that classic Hooker sound to your C7 Corvette with the Hooker BlackHeart Axle Back Exhaust System. Designed to be installed from the over the axle pipes to the tips. Manufactured with 3" 18 gauge 304 Stainless Steel and straight through dual path straight pipes. This C7 Corvette Straight Pipes offer a ragged throaty tone that gets louder the deeper you go into the throttle. 4" quad round polished tips with etched BlackHeart Logo. This C7 Corvette Muffler Delete Kit is the LOUDEST Exhaust System you can buy for the C7 and it will fit the Stingray, Grand Sport and Z06. Utilizes the factory AFM Valves to prevent the check engine light CEL and reduce resonance in four cylinder mode. Looking for weight reduction, this system will save you 10 pounds over the stock mufflers. All hardware needed for installation included.

Founded in 1962 by Gary Hooker in Ontario California. Hooker Exhaust Products became in High demand in the 70's and 80's when they dominated the NHRA. Since then their products have become synonymous with power and performance. If you want your C7 as loud as possible and want that straight off the race track sound, then the C7 Corvette Muffler Delete Kit from Hooker will bring miles of smile to your face. This C7 Corvette Straight Pipe Kit comes with 3 inch Axle Back Pipes (Right and Left) with 4.0 inch double walled polished Stainless Steel Tips.

Fitment: 2019, 2018, 2017, 2016, 2015, 2014, C7 Corvette Stingray, Grand Sport and Z06 

Fitment: This System removes the MUFFLERS and NPP VALVES on your C7 Corvette

Product Note: Please allow 7-10 Business Days for Manufacturing

C7 Corvette Stingray Flowmaster 817754

817754 - Flowmaster C7 Corvette Stingray Exhaust - Outlaw. Flowmaster's Outlaw Series Axle Back Exhaust is perfect for those who are looking for a minimal interior sound and Moderate exterior sound. Add that Classic Flowmaster Sound to your C7 Corvette with this emissions legal Stingray Exhaust. Each system is made with 304 Stainless Steel and 3.0 inch Mandrel bent Pipes for peak performance. The Outlaw Flowmaster Exhaust is finished off with Quad 4 Inch Tips and is made in the USA.

Free Shipping

Fitment: C7 Corvette Stingray (2014 - Current)

Product Note: Will not fit Corvettes with Bi-Mode NPP Exhaust

C7 Corvette Grand Sport Flowmaster 817754

817754 - Flowmaster C7 Corvette Grand Sport Exhaust - Outlaw. Flowmaster's Outlaw Series Axle Back Exhaust is perfect for those who are looking for a minimal interior sound and Moderate exterior sound. Add that Classic Flowmaster Sound to your C7 Corvette with this emissions legal Grand Sport Exhaust. Each system is made with 304 Stainless Steel and 3.0 inch Mandrel bent Pipes for peak performance. The Outlaw Flowmaster Exhaust is finished off with Quad 4 Inch Tips and is made in the USA.

Free Shipping

Fitment: C7 Corvette Grand Sport (2017 - Current)

Product Note: Will not fit Corvettes with Bi-Mode NPP Exhaust

C7 Corvette Z06 Flowmaster 817763

817763 - Flowmaster C7 Corvette Z06 Exhaust - Outlaw. Flowmaster's Outlaw Series Axle Back Exhaust is perfect for those who are looking for a minimal interior sound and Moderate exterior sound. Add that Classic Flowmaster Sound to your C7 Corvette with this emissions legal Z06 Exhaust. Each system is made with 304 Stainless Steel and 3.0 inch Mandrel bent Pipes for peak performance. The Outlaw Flowmaster Exhaust is finished off with Quad 4 Inch Tips and is made in the USA.

Free Shipping

Fitment: C7 Corvette Z06 (2015 - 2019)

Product Note: Fits Corvette Z06 with Bi-Mode NPP Exhaust

C7 Corvette Z06 Corsa Xtreme 14766BLK Black Tips

14766BLK C7 Corvette Z06 Corsa Xtreme Exhaust System. Experience all that your C7 Corvette Z06 has to offer with the Corsa Xtreme Exhaust System. Aggressive and Loud, the Z06 Corsa Xtreme is everything you have come to expect from Corsa. Manufactured with the highest grade Stainless Steel, and designed to flow maximum air, the C7 Corvette Z06 Xtreme Exhaust System is sure not to disappoint. Weighing in at 4 lbs lighter than the stock mufflers and boasting a twenty three percent increase in flow, the Corsa Xtreme performs as good as it looks. Featuring massive 4.5" Quad Black Tips, this C7 Corvette Exhaust System attaches with easy bolt-on installation and does not require cutting or welding. All Corsa Z06 Exhaust Systems feature Corsa's patented RSC No Drone technology for a drone free experience. RSC Technology eliminates low frequency resonance while minimizing back pressure. The muffler cases in the Corsa Xtreme are designed to reflect the sound waves, effectively cancelling out that frequency. 

C7 Corvette Z06 Corsa Xtreme is a favorite of Z06 owners everywhere. Not only is there no drone, but Corsa's straight through design allows for maximum flow and minimal restriction. The straight through design reduces pack pressure and frees up additional horsepower and Torque. While the Corsa Xtreme is the loudest option in the line up, it is not completely over powering. The Xtreme has a deep growl at idle, that grows and tightens up and absolute screams at wide open throttle. You can add even more volume by adding a Corsa Double Helixx X-Pipe. P/N 14766BLK

Free Shipping

Fitment: C7 Corvette Z06 (2015 -2019) 

Product Note: Will not fit C7 Corvette Stingray

Black Tips - C7 Corvette Corsa Xtreme for the C7 Corvette Grand Sport

14766BLK C7 Corvette Grand Sport Corsa Xtreme Exhaust System. Experience all that your C7 Corvette Grand Sport has to offer with the Corsa Xtreme Exhaust System. Aggressive and Loud, the GS Corsa Xtreme is everything you have come to expect from Corsa. Manufactured with the highest grade Stainless Steel, and designed to flow maximum air, the C7 Corvette Sport Xtreme Exhaust System is sure not to disappoint. Featuring massive 4.5" Quad Black Tips, this C7 Corvette Exhaust System attaches with easy bolt-on installation and does not require cutting or welding. All Corsa GS Exhaust Systems feature Corsa's patented RSC No Drone technology for a worry free installation. Fits Grand Sport with Manual Transmission Only. 

Free Shipping

Fitment: C7 Corvette Grand Sport  (2017 to 2019) Manual Transmission

Product Note: Will not fit C7 Corvette Stingray

Product Note: Will not fit Grand Sport with Automatic Transmission

C7 Corvette Z06 Corsa Xtreme

The new C7 Corvette Z06 Corsa Xtreme will take the performance of your Z06 to extreme levels. Using their patented Reflective Sound Cancellation (RSC) technology, Corsa makes the best no drone, aggressive exhaust for the C7 Corvette. The Xtreme series is the meanest, loudest, and most aggressive in their performance exhaust line up. At the same time, it is also a drone buster. It cancels out low frequency noise, so you get a clean, crisp sound when cruising. The C7 Z06 Corsa Xtreme Exhaust produces overly aggressive growl during acceleration and drone-less experience when you’re cruising down the highway. When you want it loud and throaty or when you it need to be quiet, this performance C7 Corvette exhaust will not disappoint.

The Axle-back C7 Corvette Corsa Xtreme system is manufactured to be as bold as it sounds. It is made of superior quality stainless steel for the long-lasting sound, performance, and great looks. This performance exhaust is extremely resistant to heat, rust, and corrosion. The exclusive straight-through design combined with the RSC is great at reducing back pressure for maximum horsepower and torque gains as well as improved gas mileage. The C7 Corvette Z06 Corsa Xtreme is engineered with smooth mandrel bends for unrestricted exhaust flow. The Corsa 14766 features a massive 4.5 in. quad tips with polished finish to enhance your Corvette’s overall appeal.

C7 Z06 Corsa Xtreme Exhaust kit is designed and engineered for a custom fit and will boost the performance of your Chevy Corvette. This axle-back system includes everything you need for an easy installation using common garage tools, no cutting or welding needed. All Corsa exhaust kits are manufactured in the USA and backed by a lifetime warranty. The C7 Corvette Corsa Xtreme exhaust system is legal for sale and use in all 50 states. Install one now and get monster power, mean sound, and great gas mileage. 

Free Shipping

Fitment: C7 Corvette Z06 (2015, 2016, 2017, 2018 and 2019) 

Product Note: Will not fit C7 Corvette Stingray

C7 Corvette Grand Sport Corsa 14766

Corsa 14766 C7 Corvette Grand Sport Exhaust System. Experience all that your C7 Grand Sport has to offer with the Xtreme Exhaust System. Aggressive and Loud, the GS Corsa Xtreme is everything you have come to expect from the World's leader in drone free exhaust. Manufactured with the highest grade Stainless Steel, and designed to flow maximum air, the C7 Corvette Grand Sport Xtreme Exhaust System is sure not to disappoint. Featuring massive 4.5" Quad Tips, this C7 Corvette Exhaust System attaches with easy bolt-on installation and does not require cutting or welding. This systems is 4 pounds lighter than the OEM mufflers and flows 23 percent better. All Grand Sport Systems feature Corsa's patented RSC No Drone technology for miles of drone free cruising. Each Exhaust System includes all necessary hardware and instructions for a worry free installation. Fits Corvette Grand Sport with Manual Transmission.

Manufactured in Brea Ohio from the very finest stainless steel, the Corsa 14766 for the Grand Sport is the most popular exhaust system we sell. The combination of that unmistakable Corsa Sound and their patented Reflective Sound Cancellation Technology (no drone) make this the perfect system for waking up your Grand Sport. The Xtreme is the loudest in the line up and is widely considered "How a Corvette should Sound". The C7 Corvette Grand Sport Xtreme Exhaust System has a deep growl at idle, a tight bold sound under acceleration and Screams at wide open throttle. You can add even more volume by adding the Corsa Double Helixx X-Pipe and eliminating the pup cats. 

Free Shipping

Fitment: C7 Grand Sport (2017 to 2019) Manual Transmission

Product Note: Will NOT fit Grand Sport with Automatic Transmission.

Product Note: Will not fit C7 Stingray

C7 Corvette Corsa Xtreme 14762BLK Black Tips

14762Blk C7 Corvette Stingray Corsa Xtreme Exhaust System. Experience all that your C7 Corvette has to offer with the Corsa Xtreme Exhaust System. Aggressive and Loud, the Stingray Corsa Xtreme is everything you have come to expect from Corsa. Manufactured with the highest grade Stainless Steel, and designed to flow maximum air, the Stingray Xtreme Exhaust System is sure not to disappoint. Featuring massive 4.5" Quad Black Series Tips, this C7 Corvette Exhaust System attaches behind the factory over the axle pipe and allows you to keep your NPP valves and control the exhaust volume. All Corsa Stingray Exhaust Systems feature Corsa's patented RSC No Drone technology for a worry free installation. Corsa 14762BLK

Free Shipping

Fitment: C7 Corvette Stingray (2014 to 2019) With NPP Exhaust or Standard Exhaust.

Product Note: Will Not Fit C7 Corvette Z06

C7 Corvette Grand Sport Corsa Xtreme 14762BLK Black Tips

14762Blk C7 Corvette Grand Sport Corsa Xtreme Exhaust System. Experience all that your C7 Corvette has to offer with the Corsa Xtreme Exhaust System. Aggressive and Loud, the Corsa Xtreme is everything you have come to expect from Corsa. Manufactured with the highest grade Stainless Steel, and designed to flow maximum air, the Grand Sport Xtreme Exhaust System is sure not to disappoint. Featuring massive 4.5" Quad Black Series Tips, this C7 Corvette Exhaust System attaches behind the factory over the axle pipe and allows you to keep your NPP valves and control the exhaust volume. All Corsa GS Exhaust Systems feature Corsa's patented RSC No Drone technology for a worry free installation. Fits Corvette Grand Sport with Automatic Transmission Only. Corsa 14762BLK

Free Shipping

Fitment: C7 Corvette Grand Sport (2017 - 2019) 

Product Note: Will Not Fit C7 Corvette Z06

C7 Corvette Stingray Corsa Xtreme 14762

Ever wonder what your Chevy C7 Corvette should have sounded like when it came off the assembly line? Well it’ the new Corsa Xtreme Exhaust System. Designed to deliver the meanest, loudest, and most aggressive exhaust tone in the brand’s lineup, you won’t think twice about ditching your factory exhaust. The throaty, outright roar of the C7 Corvette Corsa Xtreme during high RPMS will turn heads and be music to your ears. Using Corsa’s drone-buster RSC (Reflective Sound Cancellation) technology, you get this amazing sound without the annoying low frequency drone when cruising.

 C7 Corvette Stingray Corsa 14762 exhaust system features a dual muffler, dual rear exit with 4.5 in. quad pro-series tips in polished stainless steel. The all-welded aircraft grade steel construction is guaranteed to last, fighting corrosion and burn through damage throughout the life of your Vette. The polished finish will outshine competitors and will give your vehicle that showroom ready look. C7 Corvette Corsa Xtreme uses the award-winning, non-restrictive, straight-through muffler design for incredible crisp sound and improved gas mileage. The Corsa Xtreme exhaust system for the C7 Corvette is dyno-tested to add up to 20 horsepower and 15 ft. lbs. of torque. The CNC-machined mandrel bent tubes allow for increased exhaust flow up to 23% while reducing backpressure. This Corsa 14762  “valve-back” system is designed for attachment behind the axle-pipe valves to allow retention of factory AMF valves. It is custom-designed to the exact specifications of your vehicle for the perfect fit and amazing sound.

 C7 Corvette Stingray Corsa 14762 comes as a kit including clamps, hardware, and detailed instructions. It allows for a hassle-free bolt-on installation, no drilling and modifications required. All Corsa Xtreme Exhaust Systems are covered by a lifetime warranty. This product is 100% designed, engineered, and manufactured in Corsa’s Berea, Ohio, USA facility.

Free Shipping

Fitment: C7 Corvette Stingray (2014 - 2019) With NPP Exhaust or Standard Exhaust.

Product Note: Does NOT retain NPP valve operation

Product Note: Will not fit C7 Corvette Z06

C7 Corvette Corsa Xtreme 14762

C7 Corvette Grand Sport Corsa Xtreme Exhaust System. Experience all that your C7 Corvette has to offer with the Corsa Xtreme Exhaust System. Aggressive and Loud, the GS Corsa Xtreme is everything you have come to expect from Corsa. Manufactured with the highest grade Stainless Steel, and designed to flow maximum air, the Grand Sport Xtreme Exhaust System is sure not to disappoint. Featuring massive 4.5" Quad Tips, this C7 Corvette Corsa Xtreme Exhaust System attaches behind the factory over the axle pipe and allows you to keep your NPP valves and control the exhaust volume. All Corsa Exhaust Systems feature Corsa's patented RSC No Drone technology for a worry free installation. Fits Grand Sport Corvette with Automatic Transmission Only. Corsa 14762

Free Shipping

Fitment: C7 Corvette Grand Sport (2017 - 2019)

Product Note: Will NOT fit Grand Sport Corvette with Manual Transmission. 

Product Note: Will not fit C7 Corvette Z06