C7 Corvette Parts and Accessories

C7 Corvette ACS XL Front Splash Guards

C7 Corvette ACS Composite XL Front Wheel Splash Guards. 

OPEN BOX - NEW

Fitment: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette Stingray, Grand Sport and Z06.

Soler Performance C7 Corvette Z06 Throttle Body

The C7 Corvette Z06 Soler Performance Throttle Body - 87 mm - gives you improved throttle response and smooth air flow for more power and faster response times. This highly worked C7 Corvette Z06 Throttle Body Features: Porting Taper and Upstream Bore with Velocity Stack, Greater Discharge Coefficient of the plate / blade interface, Optimized Active Contour with Sonic Flow nozzles, 16 Ra Microinch Diamond Polished Surface Finish, Shaftless high pressure side of the blade for larger Wide Open Throttle flow area, Dome and Threaded locked screws, Dimpled shaft trailing edge and a Self cleaning Throat/Flow Gap.

"Buy and Try" No Questions Asked 30 Day Money Back Guarantee!

All the engineering and testing gives the Soler Performance C7 Corvette Z06 Throttle Body distinct and real world advantages over all the competition. The benefits include: a Lower power to weight ratio at part throttle, for a more nimble and spirited driving experience, Linearization and smoothing of the curve for a crisper and more predictable response, Improved Idle response that does not interfere with the normal idle function, more air and more power at EVERY SINGLE throttle position and provides a great base for starting or building on your current modifications. The C7 Corvette Z06 Soler Performance Throttle Controller SE8223-080 is a warranty safe modification and will no void your factory warranty. No Tune is required

Fitment: C7 Corvette Z06 - 2015, 2016, 2017, 2018 and 2019

Soler Performance C7 Corvette Throttle Body

The C7 Corvette Soler Performance Throttle Body - 87mm -gives you improved throttle response and smooth air flow for more power and faster response times. This highly worked C7 Corvette Throttle Body Features: Porting Taper and Upstream Bore with Velocity Stack, Greater Discharge Coefficient of the plate / blade interface, Optimized Active Contour with Sonic Flow nozzles, 16 Ra Microinch Diamond Polished Surface Finish, Shaftless high pressure side of the blade for larger Wide Open Throttle flow area, Dome and Threaded locked screws, Dimpled shaft trailing edge and a Self cleaning Throat/Flow Gap.

"Buy and Try" No Questions Asked 30 Day Money Back Guarantee!

All the engineering and testing gives the Soler Performance C7 Corvette Throttle Body distinct and real world advantages over all the competition. The benefits include: a Lower power to weight ratio at part throttle, for a more nimble and spirited driving experience, Linearization and smoothing of the curve for a crisper and more predictable response, Improved Idle response that does not interfere with the normal idle function, more air and more power at EVERY SINGLE throttle position and provides a great base for starting or building on your current modifications. The C7 Corvette Soler Performance Throttle Controller SE8223-040 is a warranty safe modification and will no void your factory warranty. No Tune is required

Fitment: C7 Corvette Stingray, Grand Sport - 2014, 2015, 2016, 2017, 2018 and 2019

Soler Performance C7 Corvette Throttle Controller SEO525-TC

The C7 Corvette Soler Performance Throttle Controller is the most advanced application for the new generation Corvette. Now you can take control of your of your throttle input and adjust it to your personal driving style. The gas pedal sends your ECU signals that control the cars throttle response. The OEM factory program has a very soft or mushy feeling in the 1st third of its travel, leaving a noticeable lag in response. As the world's most advanced throttle controller, the SEO525-TC gets rid the response delays from your drive by wire gas pedal, and gives you total control of the input. 

"Buy and Try" No Questions Asked 30 Day Money Back Guarantee!

The Soler Performance C7 Corvette Throttle Controller unit comes with Ten pre-programmed modes: Original Equipment, Comfort, Sport, Ludicrous, Drag Race, Artificial Intelligence, Valet, Weather, Economy, Lock, Transmission. Each one of these modes comes with an additional settings for amazing control within each setting. You can now manually adjust the various setting for maximum highway mileage or dial it all the way up in Ludicrous mode. Choose from 64 total adjustments. 

No matter what you choose, there is sure to be a setting for your personal driving style. Packed full of features, this unit is fully plug and play and does not require any re-calibration or tuning. The super easy installation takes about 15 minutes and can be done at home by just about anyone. The Unit can be controlled with the hardwired controller or via Bluetooth via your smart phone or tablet. Installation is easily reversible and the unit leaves no trace on your ECU. The C7 Corvette Soler Performance Throttle Controller SEO525-TC is a warranty safe modification and will no void your factory warranty 

Fitment: C7 Corvette Stingray, Grand Sport, Z06 and ZR1 2014, 2015, 2016, 2017, 2018 and 2019

Magnaflow C7 Corvette Stingray NPP Exhaust

Magnaflow Exhaust Systems are famous for their sound, power, and performance. They took these three things to higher levels with the NEO Series NPP Exhaust for the C7 Corvette. It is the best looking exhaust that will unleash your vehicle’s full potential with bigger pipe diameters and solid construction. This C7 Corvette Magnaflow NEO Series Exhaust offers the distinctive, powerfully deep, aggressive sound that is sure to catch everybody’s attention. With the Magnaflow performance sound, it will give your Chevy C7 Corvette the aggressive growl a muscle car deserves. Magnaflow C7 Corvette Stingray NPP Exhaust is the best sounding solution for Corvette drivers looking for reduced mass, increased power, and great styling all in one package.

 The power, sound, and performance of the C7 Corvette Magnaflow NEO Series Exhaust begin from its solid stainless steel mufflers with straight through design. Without obstructions and chambers, there is maximum flow of gases through the mufflers for maximum power. These high performance mufflers have built-in acoustical absorbing materials that eliminate harsh noise and vibrations to achieve the throaty growl. Magnaflow C7 Corvette Stingray NPP Exhaust has robotic welded and mandrel bent tubes that diminish restrictions and support the smoothest exhaust flow. The 409 stainless steel axle-back system is polished to a mirror finish for great looks and rust protection. Magnaflow part number 19581 features 3 in. diameter pipes and quad 4.5 in. rolled edge, double wall 304 Black Chrome stainless steel tips.

 Magnaflow 19581 comes with all necessary parts, hardware, and installation instructions for a complete install. It is custom-crafted specifically for your vehicle for a direct-bolt on installation, no welding or vehicle modifications required. All Magnaflow products are proudly designed and manufactured in their 3000 square feet facility in Oceanside, California, USA. This NEO Series Axle Back Exhaust System for C7 Corvette models is covered by a million-mile warranty.

Free Shipping

Fitment: C7 Corvette Stingray (2014, 2015, 2016 2017, 2018 and 2019) With AFM and With and Without NPP

Fitment: Includes NPP Valve ByPass

Magnaflow C7 Corvette Grand Sport NPP Exhaust

Magnaflow Exhaust Systems are famous for their sound, power, and performance. They took these three things to higher levels with the NEO Series NPP Exhaust for the C7 Corvette. It is the best looking exhaust that will unleash your vehicle’s full potential with bigger pipe diameters and solid construction. This C7 Corvette Magnaflow NEO Series Exhaust offers the distinctive, powerfully deep, aggressive sound that is sure to catch everybody’s attention. With the Magnaflow performance sound, it will give your Chevy C7 Corvette the aggressive growl a muscle car deserves. Magnaflow C7 Corvette Grand Sport NPP Exhaust is the best sounding solution for Corvette drivers looking for reduced mass, increased power, and great styling all in one package.

 The power, sound, and performance of the C7 Corvette Magnaflow NEO Series Exhaust begin from its solid stainless steel mufflers with straight through design. Without obstructions and chambers, there is maximum flow of gases through the mufflers for maximum power. These high performance mufflers have built-in acoustical absorbing materials that eliminate harsh noise and vibrations to achieve the throaty growl. Magnaflow C7 Corvette Grand Sport NPP Exhaust has robotic welded and mandrel bent tubes that diminish restrictions and support the smoothest exhaust flow. The 409 stainless steel axle-back system is polished to a mirror finish for great looks and rust protection. Magnaflow part number 19581 features 3 in. diameter pipes and quad 4.5 in. rolled edge, double wall 304 Black Chrome stainless steel tips.

 Magnaflow 19581 comes with all necessary parts, hardware, and installation instructions for a complete install. It is custom-crafted specifically for your vehicle for a direct-bolt on installation, no welding or vehicle modifications required. All Magnaflow products are proudly designed and manufactured in their 3000 square feet facility in Oceanside, California, USA. This NEO Series Axle Back Exhaust System for C7 Corvette models is covered by a million-mile warranty.

Free Shipping

Fitment: C7 Corvette Grand Sport (2017 to 2019) With AFM and With and Without NPP

Fitment: Includes NPP Valve ByPass

Sandyeggo Designs Corvette Billet License Plate Frame - Wings

Corvette Sandy Eggo Designs License Plate Frame. Add "Wings" to your C5, C6, C7 and C8 Corvette with this high quality Aircraft Quality Billet Aluminum License Plate Frame. This Corvette License Plate frame is laser cut and professionally powder coated in Satin Black (Also available in Billet Aluminum) Included is new mounting hardware which include felt surfacing to protect your car. Patent Pending. Made in the USA.

Fitment:  C5, C6, C7 and C8 Corvettes (All years)

Remove Before Flight Warning Flag

The Remove Before Flight Carabineer is a great add on accessory for those forgetful moments like when you forget to latch your Corvette Targa Top or as an add on show piece for your KwikToy Hood Prop and Door Prop Rods.

Fitment: C8 Corvette and Z06 (2020 - 2024)

Sandyeggo Designs Corvette Emergency Door Release Label Set

Corvette Sandyeggo Designs Emergency Door Release Label Set. Your Corvette is equipped with emergency door releases incase you lose power. However these door release handles are hard to see and not clearly marked. Add safety and security to your C6, C7 and C8 Corvette with these high quality 3D Embossed adhesive labels from Sandy Eggo Designs. Patent Pending. Made in the USA.

Fitment:  C6, C7 and C8 Corvettes (All years)

C7 Corvette Catless X-Pipe

LG Motorsports C7 Corvette X-Pipe. This Double X-Pipe will take your Corvette to the next level. Manufactured from aircraft quality 304 stainless steel, this catless X-Pipe is designed to provide unrestricted exhaust flow for improved horsepower and torque. 

The C7 Corvette X-Pipe will also improve the sound of your Corvette by eliminating the restrictive factory rear pup cats and replacing it with a smoother, more efficient crossover section. This allows for a more aggressive exhaust note and better performance across the entire RPM range. The rear pup cats on a C7 Corvette are behind the O2 sensors, so installing this product will not set off a check engine light (CEL) and does not require a Tune to be installed. 

Each Double X-Pipe is manufactured with high grade aircraft quality 304 mandrel-bent stainless steel and is 19 pounds lighter that the stock center section of your Corvette. The 3-inch diameter piping necks down to mate with your existing over the axle pipe and most aftermarket axle back exhaust system. Installation does not require cutting or welding require. This catless x-pipe is a direct bolt-on replacement  for the factory center section making it an easy installation that can be done at home with basic hand tools.

In addition to the improved sound, this double X-Pipe also improves performance by smoothing air flow and reducing back pressure. This added power is especially noticeable at wide open throttle. 

LG Motorsports is based in Anna Texas and has been making high performance Corvette parts and accessories since 1988.

Fitment: C7 Corvette Stingray, Grand Sport, Z06 and ZR1 - 2014, 2015, 22016, 2017, 2018 and 2019

Product Note: For off road use only

B&B Bullet Exhaust FCOR-0679 - C7 Corvette Z06

Get that classic deep muscle car sound for your C7 Corvette Z06 with the new Axle-back Bullet/PRT Exhaust by Billy Boat. Billy Boat exhaust systems remain one of the most popular aftermarket exhaust systems for the seventh generation Vette. Backed by their 31 years in the racing industry, they designed the C7 Bullet/PRT to take the C7 Z06 exhaust to a whole new level of power and performance. The C7 Corvette Billy Boat Bullet Exhaust with PRT system is the loudest in their lineup, delivering deep and extremely aggressive tone when under hard acceleration but mellow at cruising speed. Not for the meek and weak, the C7 Corvette Billy Boat Bullet / PRT Exhaust will scream “muscle car” like no other.

The C7 Z06 Bullet Axle-Back System is the loudest, toughest, and most powerful exhaust upgrade in the market. It starts with the highest quality T-304 stainless steel construction that is designed and tested to be extremely robust against burn through, rust, and corrosion. The tubing is mandrel bent using cutting-edge CNC machinery to ensure uninterrupted exhaust flow and integrity. The high-strength stainless steel flanges are extremely resistant to exhaust leaks. C7 Corvette Billy Boat Bullet / PRT Exhaust part number FCOR – 0679 features a 3 in. pipe and a built-in small bullet muffler size PRT resonator to diminish drone when cruising. Aside from sounding good, it is polished to a showroom finish for the added great looks. All these combined, the C7 Bullet Axle-Back Exhaust System is your ultimate choice for maximized sound and power.

This Billy Boat axle-back exhaust system for Chevrolet C7 Corvette Z06 directly bolts on to the stock system. It comes with mounting hardware and detailed instructions for an easy, no-welding, no-cutting, and no modifications required installation. All Billy Boat Systems are backed by a lifetime warranty.

Fitment: C7 Corvette Z06 (2015, 2016, 2017, 2018 and 2019)

Product Note: Please allow 7-10 Business Days for Manufacturing.

B&B X-Pipe - C7 Corvette Z06

C7 Corvette Z06 B&B X-Pipe. Billy Boat Performance Exhaust completes its Long Tube Headers with this C7 Corvette Z06 center section. This X pipe is a direct fit for B&B Headers ONLY. Select High Flow Cats or Off Road with no Cats.

Fitment: C7 Corvette Z06 (2015 - 2019)

Product Note: Please allow 7-10 Business Days for Manufacturing 

Corvette Roof Locator Seals

Replace those worn out roof locator seals without having to replace the whole assembly. Made from Ethylene Propylene Diene Monomer Rubber (EPDM) which offers superior resistance to heat, light and Ozone. These roof locator seals provide a high degree of vibration dampening and are a direct fit for your C5, C6, C7 and C8 Corvette. Sold as a set of (2)

Fitment:  C5, C6, C7 and C8 Corvette Stingray, Grand Sport and Z06 (1997 - 2023)

C7 Corvette Seat Covers

C7 Corvette Sandyeggo Designs Seat Covers. Specifically designed for the C7 Corvette Standard Seat, these seat skins are both durable and good looking. Manufactured with a high quality Leatherette and microsuede Leatherette inserts. CAD designed to insure a precise fit, these seat covers feature heavy duty nylon double stitching for every seam. Sold as a set, Drivers and Passenger Seat. 

Made in the USA.

Fitment: C7 Corvette Stingray, Grand Sport and Z06 (2014 - 2019)

Fitment: Standard Seats. WILL NOT FIT Sport Seats 

Sandyeggo Designs C7 Corvette Steering Wheel Marker

C7 Corvette Sandyeggo Designs Steering Wheel Top Center Marker. Add a visual reference to your steering wheel with this vinyl wrap. Simply peel off the protective backing and wrap your steering wheel for a simple and easy modification. Made in the USA.

Fitment:  C7 Corvette Stingray, Grand Sport and Z06 (2014 - 2019)

Sandyeggo Designs C7 Corvette Console Tray

C7 Corvette Sandyeggo Designs Console Tray. Add security for your beverages and convenience for your cell phone with this easy to install Console Tray. This is a direct bolt-in replacement for the OEM Cup Holder and features a 3.3 inch dual angle cup recess, cell phone pocket and coin slot. The utility tray uses an air tight gasket to keep spilled liquids from seeping into the console. The console tray also features easy routing for your USB cable. Patent Pending. Made in the USA.

Fitment:  C7 Corvette Stingray, Grand Sport and Z06 (2014 - 2019)

C8 Corvette Sunshade with Logo

C8 Corvette Sun Shade. This Deluxe Sunshade fits into the corners of your windshield to block out all the sun's harmful rays. This is not your average C8 Corvette Sunshade, coated on the outside with a highly reflective silver surface and trimmed nicely with a felt liner on the inside. This Corvette sunshade is insulated and will protect the interior of your C8 Corvette from the sun's harmful rays and reduce the interior temperature. Easily folds accordion style for easy storage.

Protect the interior and dash from the sun's destructive rays with this Officially Licensed GM Logo C8 Corvette Sunshade. This Windshield Sun Blocker's high quality and premium construction insure that you will get years and years of use, The exterior's highly reflective surface block the suns UV Rays and keep them from drying out your dash and causing cracks, deterioration and fading. The reflective surface is highly effective in reducing the interior heat. The interior of this C8 Sun Shade is covered in a soft felt, giving it a finished appearance and soft touch. If you park your Vette out in the direct sun light for extended periods of time, this product is for you. Simple to use, this C8 Corvette Sunshade folds accordion style for easy storage and installation.

GM License # 27-12503-43941

Fitment: C8 Stingray, Z06 - 2020, 2021, 2022, 2023, 2024

C7 Corvette Hatch Switch Mount

C7 Corvette Recessed Trunk Switch Mount from Sandyeggo Designs. Stop opening the hatch of your C7 Corvette with your knee with this recessed switch mount. Simple but affective, the switch mount moves your oem button inward so that it can not be accidently pressed when entering or exiting the vehicle. Switch operates normally after installation and requires no permanent modification to your C7 Corvette. Works for ALL C7 Corvette switch configurations.

Product Note: Switch Not Included

Fitment:  C7 Corvette Stingray, Grand Sport and Z06 (2014 - 2019)

C7 Corvette Door Dog

C7 Corvette Door Dog from Sandyeggo Designs. Add convenience and utility to your C7 Corvette door handle. The Door Dog makes opening your door a breeze. Installs in minutes and features a soft rubber button actuator to activate your door opening detent button. Use your Door Dog to open and close your door, keeping fingerprints off your paint and glass. Installation is simple, uses factory mounting locations and does not require permanent modification to your car. Patent Pending. Made in the USA.

Sold as a set of (2) Driver and Passenger sides

Fitment:  C7 Corvette Stingray, Grand Sport and Z06 (2014 - 2019)

C7 Corvette Bin Guard

C7 Corvette Sandyeggo Designs Bin Guard. Add convenience and utility to your C7 Corvette Dash Storage compartment and stop all of it's interior contents from sliding around and jamming the screen. Manufactured from impact resistant polycarbonate. and CAD designed for a perfect fit. The front shield of the Bin Guard pivots into place and prevents items in the infotainment cubby from sliding around and jamming. The design makes for a perfect fit and will not interfere with the screen sliding open or closed. The Bin Guard leaves easy access to your utility port. Patent Pending. Made in the USA.

Fitment:  C7 Corvette Stingray, Grand Sport and Z06 (2014 - 2019)

C7 Stingray Tow Hooks

C7 Corvette West Coast Corvette Tow Hooks have become very popular as either an everyday modification for those who regularly “track” their Corvette or the regular Joe who plans ahead in life and just keeps a couple in the trunk for an emergency. Many tracks require a front tow hook (tow eye) to be installed when on the track to speed up recovery and minimize the chances of the track flatbed operator screwing up your car pulling from the wrong spot. Not many of us race our Corvette though.

You may not be taking your Corvette to the track, but breakdowns or accidents happen and if you need a flatbed and don't have a tow hook, they will want to hook up to someplace under the front and the tow line/cable might be at an angle that would then hit the underside of the front and crack the splitter. Much better to have a hook available for them to use, either in the trunk or permanently installed.

C7 Stingray, Grand Sport and Z06 Tow Hooks are available in three colors. Anodized Black, Red or Blue and are designed to fit your C7 Z51, Z06, Grand Sport and Stingray Corvette. Forums advise us to be careful when choosing a tow hook and to avoid the 'cool' looking aftermarket tow hooks sold on the web made of cheap Steel and are often likely to snap when you need it the most. Use the factory tow eye or a quality tow hook from a reputable racing equipment manufacturer such as you find with the C7 Corvette West Coast Corvette Tow Hooks.

It is better to be safe than sorry. If you have performance Tow Hooks, it will make it easier for the tow truck driver to maneuver the car without causing further damage.

Fitment: C7 Corvette Stingray, Grand Sport, Z06 and ZR1 Coupe and Convertible 

C7 Corvette AMF Valve Simulators

 AMF Valve Simulator Brackets for the C7 Corvette Stingray, Grand Sport, Z06 and ZR1. Sold as a Set of 2

Fitment: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette with AMF Valves, including Z51

Product Note: Intended for Off Road Use

C7 Corvette Z06 Carbon Fiber Intake

C7 Corvette Corsa Carbon Fiber Intake 44002D - Z06 is the Intake that looks as good as it performs specifically made to take your 2015-2019 Chevrolet C7 Z06 6.2L V8 to the next level. The product alone is an art piece in the style and function with the best in carbon fiber construction designed for maximum strength and performance. Beauty is in the eyes of the beholder and this one fits the bill, deserving of a center fold.

This has been dyno tested and aftermarket approved as the C7 Corvette Z06 Carbon Fiber Intake system produces up to an additional 44HP and 70 FT LBS TQ from the LT-4 engine without requiring a tune. Say it isn’t so with performance results from a CAI that is a simple and direct bolt on system that will have you on the road and enjoying the results in less than an hours’ time.

Beginning in 2012, CORSA entered the Air Intake market with a range of products that took advantage of their advanced understanding of airflow. The C7 Corvette Z06 Carbon Fiber Intake takes advantage of this knowledge by utilizing Free-Flowing High-Performance DryTech Filter that features easy cleaning and maintenance 

Every CORSA product is engineered and designed to match the unique properties of the C7 Corvette and it is designed to deliver perfect fitment and performance. CORSA Performance C7 Corvette air intake products are backed by a Limited Lifetime warranty for as long as you own your vehicle with proof of purchase. One year for DryTech 3D filter.

Driven with a relentless passion to deliver the ultimate automotive driving experience, CORSA Performance uses advanced engineering technologies to create market leading & cutting-edge products for the automotive enthusiast.

Fitment: 2015, 2016, 2017, 2018, 2019 C7 Corvette Z06

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C7 Corvette Z06 Carbon Fiber Cold Air Intake

C7 Corvette Corsa Carbon Fiber Intake 44002 - Z06 is the Cold Air Intake that looks as good as it performs specifically made to take your 2015-2019 Chevrolet C7 Z06 6.2L V8 to the next level. The product alone is an art piece in the style and function with the best in carbon fiber construction designed for maximum strength and performance. Beauty is in the eyes of the beholder and this one fits the bill, deserving of a center fold.

This has been dyno tested and aftermarket approved as the C7 Corvette Z06 Carbon Fiber Cold Air Intake system produces up to an additional 44HP and 70 FT LBS TQ from the LT-4 engine without requiring a tune. Say it isn’t so with performance results from a CAI that is a simple and direct bolt on system that will have you on the road and enjoying the results in less than an hours’ time.

Beginning in 2012, CORSA entered the Air Intake market with a range of products that took advantage of their advanced understanding of airflow. The C7 Corvette Z06 Carbon Fiber Cold Air Intake takes advantage of this knowledge by utilizing Free-Flowing High-Performance Filtration that features CORSA's High Flow 5 Layer Oiled Cotton Gauze MaxFlow 5 Filter.

Every CORSA product is engineered and designed to match the unique properties of the C7 Corvette and it is designed to deliver perfect fitment and performance. CORSA Performance C7 Corvette air intake products are backed by a Limited Lifetime warranty for as long as you own your vehicle with proof of purchase. One year for DryTech 3D and MaxFlow 5 filters.

Driven with a relentless passion to deliver the ultimate automotive driving experience, CORSA Performance uses advanced engineering technologies to create market leading & cutting-edge products for the automotive enthusiast.

Fitment: 2015, 2016, 2017, 2018, 2019 C7 Corvette Z06

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C7 Corvette Red Carbon Fiber Intake - Dry Filter

Corsa is driven with their passion to provide all automotive enthusiast the ultimate driving experience. All their intakes are manufactured using only the highest quality of standards and cutting-edge technology. Using their advanced understanding of airflow, they have created a Cold Air Intake for the Chevy C7 Corvette that will deliver more power, even in the toughest driving environments. The C7 Corvette Corsa Intake will take your engine’s performance to the top through massive airflow improvements and horsepower gains.

 When you bolt on a brand new C7 Corvette Red Carbon Fiber Intake, your Vette will instantly gain up to 15 hp and 15 ft-lbs torque without a tune! Thanks to its cutting-edge design and top-grade materials. It features 100% carbon fiber construction for lightweight toughness and efficient air flow. Part number 44001D-R uses Corsa’s DryTech 3D air filter that delivers superb filtration performance. It guarantees up to 98% filtration efficiency using hydrophobic polysynthetic fibers that extends maintenance intervals by up to 50,000 miles depending on driving conditions. The DryTech 3D air filter is so much better at trapping damaging particles than traditional cone filters by utilizing their unique pleating geometry. Overall, the C7 Corvette Corsa Intake will outflow your stock intake by up to 14% for the impressive power boost and engine efficiency.

 The C7 Corvette Corsa Carbon Fiber Cold Air Intake system includes a Mass Air Flow (MAF) sealing gasket, rubber gromet, silicone coupler, band clamps, M4 allen head screws, rubber backed sealing washers, and detailed instructions for a complete and easy installation. C7 Corvette Corsa Intake is backed by a limited lifetime warranty. Part Number 44001D is Federal (EPA) compliant ONLY, it is not legal for installation on vehicles registered in California and other states that follow CARB standards. All Corsa exhaust and intake products are proudly designed and manufactured in the USA.

Fitment: C7 Corvette Stingray and Grand Sport. 2014, 2015, 2016, 2017, 2018, 2019

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

Product Note: Will Not Fit C7 Corvette Z06

C7 Corvette RED Carbon Fiber Cold Air Intake

C7 Corvette Corsa Intake - RED Carbon Fiber - Oiled Filter - 44001-R. Years of high tech air flow experience has given birth to the only Red Carbon Fiber Intake on the Market. Corsa is driven with their passion to provide all automotive enthusiast the ultimate driving experience and the performance of the C7 Corvette RED Carbon Fiber Cold Air Intake is no exception. All their intakes are made using only the highest quality of standards and cutting-edge technology. Using their advanced understanding of airflow, they have created a Cold Air Intake for the Chevy C7 Corvette that will deliver more power, even in the toughest driving environments. The C7 Corvette Corsa Cold Air Intake will take your engine’s performance to the top and the stunning Carbon Fiber will give you a big smile every time you open your hood

When you bolt on a brand new C7 Corvette Red Carbon Fiber Cold Air Intake, you can expect gains of up to 15 hp and 15 ft-lbs torque. Thanks to its cutting-edge design and top-grade materials. It features 100% carbon fiber construction for lightweight toughness and efficient air flow. Part number 44001 uses Corsa’s Oiled 3D air filter that delivers superb filtration performance. It guarantees up to 98% filtration efficiency using a traditional, high flow Oiled Filer. The 3D air filter is so much better at trapping damaging particles than traditional cone filters by utilizing their unique pleating geometry. Overall, the C7 Corvette Corsa Intake will outflow your stock intake by up to 14% for the impressive power boost and engine efficiency. No Tune Required and will not set of a Check Engine Light.

The C7 Corvette Corsa Carbon Fiber Cold Air Intake system includes a Mass Air Flow (MAF) sealing gasket, rubber grommet, silicone coupler, band clamps, M4 allen head screws, rubber backed sealing washers, and detailed instructions for a complete and easy installation. C7 Corvette Corsa Intake is backed by a limited lifetime warranty. Part Number 44001 is Federal (EPA) compliant ONLY, it is not legal for installation on vehicles registered in California and other states that follow CARB standards. All Corsa exhaust and intake products are proudly designed and manufactured in the USA.

Fitment: C7 Corvette Stingray and Grand Sport. 2014, 2015, 2016, 2017, 2018, 2019

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

Product Note: Will Not Fit C7 Corvette Z06

C7 Corvette Replacement Air Filter

C7 Corvette BCM Air Filter - FB871/08. With the C7 Chevy designers got rid of the flat rectangle filter and replaced it with a more efficient cone shape design that allows an increased air flow and more efficient filtration. This moves a greater mass of air and gives better combustion while increasing performance in your C7 Corvette.  BMC's main aim is to bring knowledge and passion from their world-renowned race experience into the everyday life of the C7 Corvette. Taken directly from competition, the expertise of Italian engineers and designers is rigorously transferred to street production.

BMC Corvette Replacement Air Filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity. They are produced using a "Full Molding" system that enables the characteristic red filter to be realized from a single mold with no welded joints thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes. All BMC Corvette Air Filters are pre-oiled, and they can be washed and regenerated by using the appropriate BMC regeneration kit.

Installation of your C7 Corvette BCM Air Filter could not be easier. BMC filters replace your original paper filter. Open the air-box and install the  BMC filter in the same way you remove the old. In doing so will allow the passage of a greater air flow and compared to traditional OEM paper filters which must be replaced when carrying out maintenance, BMC filters can be re-used so that they last as long as the vehicle itself.

Better air flow means better performance with an increase of power from your C7 6.2 L V8 Corvette engine.

Fitment: 2019, 2018, 2017, 2016, 2015, 2014 C7 Corvette Stingray, Grand Sport, Z06 and ZR1

C7 Corvette Grand Sport Borla Exhaust System

C7 Corvette Borla S-Type 11855 with NPP Exhaust is designed for the 2017-2019 Chevrolet Corvette (C7) Grand Sport with a 6.2L V8 engine with a Automatic Transmission with AFM With NPP Dual Mode Exhaust.  

**This Axle-Back system if for cars equipped both AFM and NPP Valves excluding the Grand Sport With Manual Transmission.

With over 40 years of experience, Borla is very good at making high-quality exhaust systems and Corvette is a model that they specialize in. Best of all, BORLA exhaust systems are certified street legal in 50 states and will not violate factory or dealership warranties. This S-Type system delivers an exhaust note that's aggressive, but not the loudest of the Borla lineup.

The C7 Corvette Grand Sport Borla Exhaust System will deliver the expected performance gains of all Borla kits and is manufactured using 2.75 stainless steel mandrel bent tubing that will allow for a smooth exhaust flow, creating improved horsepower and torque. Each muffler provides a single 2.75 inch inlet and dual 2.0-inch exit before the added 4.25-inch Dual Round Rolled Angle-Cut Intercooled Tips that creates the Quad Center Rear Exit classic look. Intercooled tips are made from 2 pieces of tube. The inside is flared to meet the outside. There is a small gap between the tubes that acts as a buffer for heat. Think of it as a dual pane window. The inside tube gets all the exhaust heat and the outside stays about half the temperature.

Installation of the C7 Corvette Borla S-Type with NPP Exhaust is best left to the professionals. It is the responsibility of the purchaser to follow all installation instruction guidelines and safety procedures supplied with your C7 Grand Sport Exhaust System.

Free Shipping

Product Note: Fits (2017, 2018 and 2019) Corvette Grand Sport with Factory NPP Dual Mode Exhaust and Automatic Transmission

Product Note: *The rear valence must be removed to complete the installation.

Product Note: Will not fit GS with a Manual Transmission

C7 Corvette Stingray Borla Exhaust System

C7 Corvette Borla S-Type 11855 with NPP Exhaust is designed for the 2014-2019 Chevrolet Corvette (C7) Stingray with a 6.2L V8 engine in either an Automatic or Manual Transmission with AFM With NPP Dual Mode Exhaust.  

**This Axle-Back system if for cars equipped both AFM and NPP Valves excluding the Grand Sport With Manual Transmission.

With over 40 years of experience, Borla is very good at making high-quality exhaust systems and Corvette is a model that they specialize in. Best of all, BORLA exhaust systems are certified street legal in 50 states and will not violate factory or dealership warranties. This S-Type system delivers an exhaust note that's aggressive, but not the loudest of the Borla lineup.

The C7 Corvette Stingray Borla Exhaust System will deliver the expected performance gains of all Borla kits and is manufactured using 2.75 stainless steel mandrel bent tubing that will allow for a smooth exhaust flow, creating improved horsepower and torque. Each muffler provides a single 2.75 inch inlet and dual 2.0-inch exit before the added 4.25-inch Dual Round Rolled Angle-Cut Intercooled Tips that creates the Quad Center Rear Exit classic look. Intercooled tips are made from 2 pieces of tube. The inside is flared to meet the outside. There is a small gap between the tubes that acts as a buffer for heat. Think of it as a dual pane window. The inside tube gets all the exhaust heat and the outside stays about half the temperature.

Installation of the C7 Corvette Borla S-Type with NPP Exhaust is best left to the professionals. It is the responsibility of the purchaser to follow all installation instruction guidelines and safety procedures supplied with your C7 Stingray Exhaust System.

Free Shipping

Product Note: Fits (2014 - 2019) Corvette Stingray with Factory NPP Dual Mode Exhaust

Product Note: *The rear valence must be removed to complete the installation.

C7 Corvette Grand Sport Borla Exhaust with Black Tips

C7 Corvette Borla ATAK 11869CB with Standard Exhaust is the place to be if you are looking to upgrade your 2014-2019 Chevrolet Corvette with an aggressive sound made specifically for models that have AFM and NPP disabled and or are NOT equipped with AFM and NPP functionality. Note * A Check Engine Light will occur on vehicles equipped with AFM.

Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust and the C7 Corvette Grand Sport Borla Exhaust system with Black Tips meets all the required specifications. Borla is a company that proudly supports Made in the USA and maximizes patented straight-through multi-core technology to unleash hidden horsepower in your Corvette.

Ultra-smooth CNC manufactured mandrel bends ensure a massive amount of air flow and with that an increase in torque and horsepower due to the precision computer-controlled CNC manufacturing process. Choosing to do so ensures an accurate fit to go along with the distinctive BORLA® Sound of Power respected by Corvette enthusiasts through out the world. 

Each muffler has a 2.75 inlet and dual 2 inch outlet that end with a total of four Intercooled Ceramic Black 4.25 inch tips that are dual rolled and angle cut for an impressive appearance. All four combine to create a Quad Center Rear Exit on the back of your C7 Corvette Grand Sport.

Borla Performance Industries recommends professional installation from a qualified installer who has all the necessary equipment, tools and experience ensuring proper installation. In the end your C7 Corvette Grand Sport Borla Exhaust with Black Tips will thank you while giving you the look you are after combined with the Aggressive sound Borla ATAK systems are well known for within the industry.

Free Shipping

Product Note: Fits (2017, 2018 and 2019) Corvette Grand Sport with Factory Standard Exhaust Option Only

Product Note: Eliminates the AMF Valves

C7 Corvette Stingray Borla Exhaust with Black Tips

C7 Corvette Borla ATAK 11869CB with Standard Exhaust is the place to be if you are looking to upgrade your 2014-2019 Chevrolet Corvette with an aggressive sound made specifically for models that have AFM and NPP disabled and or are NOT equipped with AFM and NPP functionality. Note * A Check Engine Light will occur on vehicles equipped with AFM.

Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust and the C7 Corvette Stingray Borla Exhaust system with Black Tips meets all the required specifications. Borla is a company that proudly supports Made in the USA and maximizes patented straight-through multi-core technology to unleash hidden horsepower in your Corvette.

Ultra-smooth CNC manufactured mandrel bends ensure a massive amount of air flow and with that an increase in torque and horsepower due to the precision computer-controlled CNC manufacturing process. Choosing to do so ensures an accurate fit to go along with the distinctive BORLA® Sound of Power respected by Corvette enthusiasts through out the world. 

Each muffler has a 2.75 inlet and dual 2 inch outlet that end with a total of four Intercooled Ceramic Black 4.25 inch tips that are dual rolled and angle cut for an impressive appearance. All four combine to create a Quad Center Rear Exit on the back of your C7 Corvette Stingray.

Borla Performance Industries recommends professional installation from a qualified installer who has all the necessary equipment, tools and experience ensuring proper installation. In the end your C7 Corvette Stingray Borla Exhaust with Black Tips will thank you while giving you the look you are after combined with the Aggressive sound Borla ATAK systems are well known for within the industry.

Free Shipping

Product Note: Fits (2014 - 2019) Corvette Stingray with Factory Standard Exhaust Option Only

Product Note: Eliminates the AMF Valves

C7 Corvette Kooks Stepped Long Tube Headers with Green Cats

C7 Corvette Kooks Headers 1-7/8" x 2" Stepped with High Flow Green Cats - Street. This C7 Corvette Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance and features 1-7/8" x 2" Stepped primaries with High Flow cats. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C7 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included with this C7 Corvette Kooks Stepped Long Tube Header system for the Stingray, Grand Sport and Z06 is a center section X-Pipe with High Performance Green Cats. Green Cats are perfect for C7 Corvettes with high horsepower applications, like Turbo Charging, Supercharging or big CAM builds. The X-Pipe is a full 3 inches, that necks down to 2.75” at the over the axle flange to perfectly mate with your OEM or Aftermarket Axle Back Exhaust. Each Kooks Stingray Header System comes with New Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Kooks Corvette Long Tube Headers require a Tune to get maximum Horse Power and Torque Gains. Bolt on a set of Kooks Headers on your C7 Corvette and let the fun begin. Kooks 2170H530

Kooks Mission Statement is "Superior Engineering with Performance Excellence" and that is what you get with every single set of Kooks Corvette Long Tube Headers and Exhaust Systems. Their manufacturing facility in Moorseville NC is equipped with some of the most advanced CNC and Mandrel Bending machines in the industry. Their state of the art equipment and expertise allows them to achieve Mil-Spec tolerances. Their own in house R&D testing center allows them to put out some of the most powerful Corvette Headers available. For over 50 Years Kooks has been a leader in Performance Exhaust Systems and their Corvette Headers are no exception. Kooks Long Tube Headers can be found on High Performance Street Corvettes and Corvette Race Cars world wide. 

Free Shipping

Fitment: C7 Corvette Stingray, Grand Sport and Z06 - LT1, LT4 and LT5 (2014 - 2019)

C7 Corvette Kooks 2 inch Long Tube Headers with Green Cats

C7 Corvette Kooks Headers 2" with High Flow Cats Green Cats - Street. This C7 Corvette Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance and features 2 inch primaries. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C7 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included with this 2 inch Kooks Long Tube Header system with Green Cats for the C7 Corvette Stingray, Grand Sport and Z06 is a center section X-Pipe with High Performance Green Cats. Green Cats are perfect for C7 Corvettes with high horsepower applications, like Turbo Charging, Supercharging or big CAM builds. The X-Pipe is a full 3 inches, that necks down to 2.75” at the over the axle flange to perfectly mate with your OEM or Aftermarket Axle Back Exhaust. Each Kooks Header System comes with New Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Kooks Corvette Long Tube Headers require a Tune to get maximum Horse Power and Torque Gains. Bolt on a set of Kooks Headers on your C7 Corvette and let the fun begin. Kooks 2170H630

Kooks Mission Statement is "Superior Engineering with Performance Excellence" and that is what you get with every single set of Kooks Corvette Long Tube Headers and Exhaust Systems. Their manufacturing facility in Moorseville NC is equipped with some of the most advanced CNC and Mandrel Bending machines in the industry. Their state of the art equipment and expertise allows them to achieve Mil-Spec tolerances. Their own in house R&D testing center allows them to put out some of the most powerful Corvette Headers available. For over 50 Years Kooks has been a leader in Performance Exhaust Systems and their Corvette Headers are no exception. Kooks Long Tube Headers can be found on High Performance Street Corvettes and Corvette Race Cars world wide. 

Free Shipping

Fitment: C7 Corvette Stingray, Grand Sport and Z06 - LT1 / LT4 / LT5 (2014, 2015, 2016, 2017, 2018 and 2019)

C7 Corvette Kooks 1-7/8" Long Tube Headers with Green Cats

C7 Corvette Kooks Headers 1-7/8" with High Flow Green Cats - Street. This C7 Corvette Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance and features 1-7/8 inch primaries. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C7 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included with this 1-7/8 Kooks Long Tube Header system with Green Cats for the C7 Corvette Stingray, Grand Sport and Z06 is a center section X-Pipe with High Performance Green Cats. Green Cats are perfect for C7 Corvettes with high horsepower applications, like Turbo Charging, Supercharging or big CAM builds. The X-Pipe is a full 3 inches, that necks down to 2.75” at the over the axle flange to perfectly mate with your OEM or Aftermarket Axle Back Exhaust. Each Kooks Header System comes with New Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Kooks Corvette Long Tube Headers require a Tune to get maximum Horse Power and Torque Gains. Bolt on a set of Kooks Headers on your C7 Corvette and let the fun begin. Kooks 2170H430

Kooks Mission Statement is "Superior Engineering with Performance Excellence" and that is what you get with every single set of Kooks Corvette Long Tube Headers and Exhaust Systems. Their manufacturing facility in Moorseville NC is equipped with some of the most advanced CNC and Mandrel Bending machines in the industry. Their state of the art equipment and expertise allows them to achieve Mil-Spec tolerances. Their own in house R&D testing center allows them to put out some of the most powerful Corvette Headers available. For over 50 Years Kooks has been a leader in Performance Exhaust Systems and their Corvette Headers are no exception. Kooks Long Tube Headers can be found on High Performance Street Corvettes and Corvette Race Cars world wide. 

Free Shipping

Fitment: C7 Corvette Stingray, Grand Sport and Z06 - LT1 / LT4 LT5 (2014 - 2019)

C7 Corvette Kooks 2 inch Long Tube Headers

C7 Corvette Kooks Headers 2" with High Flow Cats - Street. This C7 Corvette Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance and features massive 2 inch primaries. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C7 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included with this 2 inch Kooks Long Tube Header system for the C7 Corvette Stingray, and Grand Sport is a center section X-Pipe with High Flow Cats.  The X-Pipe is a full 3 inches, that necks down to 2.75” at the over the axle flange to perfectly mate with your OEM or Aftermarket Axle Back Exhaust. Each Kooks Stingray Header System comes with New Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Kooks Corvette Long Tube Headers require a Tune to get maximum Horse Power and Torque Gains. Bolt on a set of Kooks Headers on your C7 Corvette and let the fun begin. Kooks 2170H620

Kooks Mission Statement is "Superior Engineering with Performance Excellence" and that is what you get with every single set of Kooks Corvette Long Tube Headers and Exhaust Systems. Their manufacturing facility in Moorseville NC is equipped with some of the most advanced CNC and Mandrel Bending machines in the industry. Their state of the art equipment and expertise allows them to achieve Mil-Spec tolerances. Their own in house R&D testing center allows them to put out some of the most powerful Corvette Headers available. For over 50 Years Kooks has been a leader in Performance Exhaust Systems and their Corvette Headers are no exception. Kooks Long Tube Headers can be found on High Performance Street Corvettes and Corvette Race Cars world wide. 

Free Shipping

Fitment: C7 Corvette Stingray and Grand Sport (6.2L LT1) (2014 - 2019)

C7 Corvette Kooks 1-7/8 Long Tube Headers

C7 Corvette Kooks Headers 1-7/8" with High Flow Cats - Street. This C7 Corvette Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance and features 1-7/8 inch primaries. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C7 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included with this 1-7/8 Kooks Long Tube Header system for the C7 Corvette Stingray, and Grand Sport is a center section X-Pipe with High Flow Cats.  The X-Pipe is a full 3 inches, that necks down to 2.75” at the over the axle flange to perfectly mate with your OEM or Aftermarket Axle Back Exhaust. Each Kooks Stingray Header System comes with New Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Kooks Corvette Long Tube Headers require a Tune to get maximum Horse Power and Torque Gains. Bolt on a set of Kooks Headers on your C7 Corvette and let the fun begin. Kooks 2170H420

Kooks Mission Statement is "Superior Engineering with Performance Excellence" and that is what you get with every single set of Kooks Corvette Long Tube Headers and Exhaust Systems. Their manufacturing facility in Moorseville NC is equipped with some of the most advanced CNC and Mandrel Bending machines in the industry. Their state of the art equipment and expertise allows them to achieve Mil-Spec tolerances. Their own in house R&D testing center allows them to put out some of the most powerful Corvette Headers available. For over 50 Years Kooks has been a leader in Performance Exhaust Systems and their Corvette Headers are no exception. Kooks Long Tube Headers can be found on High Performance Street Corvettes and Corvette Race Cars world wide. 

Fitment: C7 Corvette Stingray and Grand Sport (2014 - 2019)

Pedal Commander PC49 C8 Corvette Throttle Controller

The C8 Corvette Pedal Commander Throttle Controller PC49 will eliminate the throttle lag in your New Stingray Corvette. You can completely take control of your of your throttle input.  The gas pedal sends your computer signals and controls the cars response. The OEM factory program has a very soft or mushy feeling in the 1st third of its travel, leaving a noticeable lag in response. As the world's most advanced throttle controller, the PC49 gets rid the response delays from your drive by wire gas pedal, and gives you total control of the input. 

The Pedal Commander C8 Corvette TC unit comes with four pre-programmed modes: Eco, City, Sport and Sport+. Each one of these modes comes with an additional eight settings so that you can make it more or less responsive. Now you can manually adjust for maximum highway mileage or dial it all the way up for some track time. No matter what you choose, there is sure to be a setting for your personal driving style. Packed full of features, this unit is fully plug and play and does not require any re-calibration or tuning. The super easy installation takes about 10 minutes and can be done by anyone with basic automotive knowledge. Operation can be done via the hardwired controller or via Bluetooth via your smart phone or tablet. Installation is easily reversible and the unit leaves no trace on your ECU. The C8 Corvette Pedal Commander Throttle Controller PC49 WILL NOT Void your factory warranty 

Fitment: C8 Corvette Stingray, 2020, 2021, 2022, 2023 and 2024

C8 Corvette Black Lug Nuts with Bulge Cone Seat 64074

McGard C8 Corvette Lug Nuts - Black Bulge Cone Seat - 64074. Perfect to replace the dull, beat up lug nuts on your C8 Corvette Stingray. Each set is triple Nickle Chrome Plated with Black PVD by their experienced staff using their own in-house plating, guaranteeing that your set will keep shining for years to come. Infact, they are so sure about the quality of their products, they are backed by a written lifetime warranty.

Features:

• Chrome with Black PVD
• M14 x 1.5 Thread Size
• 22mm Hex Head Size
• 1.635 Inch in Overall Length
• Bulge Cone Nut Seat
• Sold as a set of (4)

C8 Corvette Black Lug Nuts lead a rough life. They are exposed to harsh weather conditions, corrosive wheel cleaners, impact guns and wrenches. All McGard C8 Corvette Lug Nuts are manufactured with restricted chemistry steel, through-hardened and Triple Chrome Plated with Black PVD so you can be sure that they will look brand new for years to come. Guaranteed not to rust, peel or chip, these McGard C8 Corvette Lug Nuts are designed for the real world, meeting or exceeding all OEM Safety Requirements, ensuring that your wheels are not being held on by inferior soft metal lugs. Safe for use with OEM Rims or Steel and Aluminum Aftermarket Wheels. When only the Best C8 Corvette Black Lug Nuts will do, then it has to be McGard

Fitment: C8 Stingray - 2020, 2021, 2022, 2023, 2024

C7 Corvette Stingray with AMF Valves AWE Track Edition Valveback

C7 Corvette AWE Track Edition Valveback 3020-42073 / 3020-43081 - Stingray with AMF Valves. When you want real dyno proven Horsepower, look no further than the C7 Corvette Stingray AWE Valve Back Track Edition Exhaust System. Manufactured with the highest grade US sourced 3 Inch .065 wall T304L Stainless Steel and mandrel bent for maximum air flow, this valve back unleashes the true sound of your Stingray. This is a loud system, about as loud as you can get. Easy bolt in installation uses all factory mounting locations and does not require permanent modification to your car. The tips are offered in two finishes, Chrome and Black Diamond. The Tips and be adjusted inward and outward per your personal preference. This Track Edition C7 Stingray Exhaust has a limited lifetime warranty and is guaranteed not to set off a Check Engine Light (CEL). 

The C7 Corvette Stingray AWE Track Edition Valveback Exhaust is manufactured in AWE's state of the art facility located just outside of Philadelphia, Pennsylvanian. Adding a AWE Valveback exhaust to your Stingray Corvette will substantially increase the Volume and t their will not set off a CEL (Check Engine Light) or require an aftermarket tune. Installation is straight forward and no modification or fabrication is needed. CAD designed and real world tested on the street and track, the C7 Corvette AWE Valve Back Track Edition was engineered to maintain optimal back pressure to insure power gains across the chart. Installing a AWE Stingray Valve Back Exhaust can be done at home with a lift and basic hand tools. 

Free Shipping

Fitment: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette Stingray Automatic and Manual Transmissions with AMF Valves, including Z51

Product Note: Please allow for 7-10 Business Days for manufacturing. 

Product Note: Intended for Off Road Use

C7 Corvette Grand Sport Automatic with AMF Valves AWE Track Edition Valveback 

C7 Corvette AWE Track Edition Valveback 3020-42073 / 3020-43081 - Grand Sport Automatic with AMF Valves. When you want real dyno proven Horsepower, look no further than the C7 Corvette Grand Sport AWE Valve Back Track Edition Exhaust System. Manufactured with the highest grade US sourced 3 Inch .065 wall T304L Stainless Steel and mandrel bent for maximum air flow, this valve back unleashes the true sound of your Stingray. This is a loud system, about as loud as you can get. Easy bolt in installation uses all factory mounting locations and does not require permanent modification to your car. The tips are offered in two finishes, Chrome and Black Diamond. The Tips and be adjusted inward and outward per your personal preference. This Track Edition C7 Grand Sport Exhaust has a limited lifetime warranty and is guaranteed not to set off a Check Engine Light (CEL). 

The C7 Corvette Grand Sport AWE Track Edition Valveback Exhaust is manufactured in AWE's state of the art facility located just outside of Philadelphia, Pennsylvanian. Adding a AWE Valveback exhaust to your Grand Sport Corvette will substantially increase the Volume and t their will not set off a CEL (Check Engine Light) or require an aftermarket tune. Installation is straight forward and no modification or fabrication is needed. CAD designed and real world tested on the street and track, the C7 Corvette AWE Track Edition Exhaust was engineered to maintain optimal back pressure to insure power gains across the chart. Installing a AWE Grand Sport Valve Back Exhaust can be done at home with a lift and basic hand tools. 

Free Shipping

Fitment: 2017, 2018, 2019 C7 Corvette Grand Sport Automatic Transmission with AMF Valves, including Z51

Product Note: Please allow for 7-10 Business Days for manufacturing. 

Product Note: Will NOT work with Grand Sport Manual (M7) Transmissions.

Product Note: Intended for Off Road Use

C7 Corvette Stingray Borla 11863CB with Black Tips

The 11863CB Borla ATAK is the loudest of the Borla C7 Corvette Stingray line up. It delivers a deep and aggressive sound through out the entire RPM range. The Borla Stingray ATAK axle back exhaust is for use on C7 Corvettes with Standard Type Exhaust (Not NPP Valved Exhaust).  This Borla C7 Corvette Exhaust features the 4.25" Black Dual Round Rolled Angle Cut Intercooled Tips and has been Dyno Tested to increase both Horsepower and Torque. C7 Corvette Borla ATAK 11863CB

Free Shipping

Product Note: Fits (2014 - 2019) Corvette Stingray with Factory Standard Exhaust Option Only

Product Note: Retains the AMF Valves

C7 Corvette Grand Sport Borla S-Type 11874

The 11874 Borla S-Type is the more moderate of the Borla C7 Corvette Grand Sport line up. It delivers a deep and aggressive sound when you step on the gas, but quiets down when you are light on the throttle.. The Borla Grand Sport S Type axle back exhaust uses twin valves to allow for full exhaust sound or it can be muted to allow for a more mellow ride. This Borla C7 Corvette Exhaust features the Dual 4.25" Round Rolled Angle Cut Long Tips and has been Dyno Tested to increase both Horsepower and Torque.

Free Shipping

Product Note: Fits (2017 - 2019) Corvette Grand Sport with Factory NPP Exhaust Option Only

C7 Corvette Drag Pack

LG Motorsports C7 Corvette billet drag spindle kit for 15" wheels.

LG Motorsports now has a complete bolt on solution for your traction needs on big HP C7 Corvettes.  Our new BOLT ON 15" conversion kit will allow you to run any number of Weld or Billet Specialty (and similar) 15" wheels on the back of your Corvette Stingray or Z06.  True drag racers know that big power takes a big tire to get the power to the ground and we have your solution! 

Like our C5/6 spindles these new billet pieces are strong enough for 3000+ HP and accept your stock parking brake, brake lines, and OEM wheel bearings.  Our new chrome moly lower control arms we developed to mate to these and allow room to squeeze a 15" wheel into the tight confines of the C7 platform. 

Kit Includes 

• LG Motorsports C7 Billet Drag Spindles
• LG Motorsports Chrome Moly custom lower control arms
• LG Rear HD Tie Rods
• LG Motorsports custom one piece rear brake rotors
• LG Motorsports rear lowering bolts
• Wilwood 4 Piston brake calipers
• Rear brake pads and hardware
• Two lower control arm bolts
• Ball joints installed into spindles and control arms
• All supporting hardware

Free Shipping

Fitment: C7 Corvette Stingray, Grand Sport and Z06 (2014-2019)

C7 Corvette Power Stop Z26 Brake Pads

Your high-performance muscle car demands greater braking power that your stock pads just can’t deliver. The Z26 Power Stop Brake Pads offer a higher level of brake torque, perfect for modified or high performance C7 Corvettes. The Z26 Street Performance series utilize a special carbon-infused ceramic formulation that delivers the quickest brake response even under the most aggressive driving situations.

C7 Corvette Powerstop Z26 Street Performance Carbon Fiber Ceramic Brake Pads are built for dust-free, fade-free, and noise-free braking in hot, cold, wet, or any driving condition. Its carbon ceramic construction works great in keeping dust, debris, and gas away from your wheels, making it easy to keep them clean and giving you more time to enjoy the drive. Compared to other brands and OEM ones, the Z26 Street C7 Corvette Power Stop Brake Pads can deliver up to 20% more braking power ensuring safety and control during high performance street driving. The high coefficient of friction produced by Z26 Street series significantly reduce brake-fading even at high temperatures up to 1500 degree Fahrenheit. These are virtually the quietest set of pads, due to its chamfered and slotted design with built-in stainless steel shims that promote squeal-free braking. It features a heat treated powder coated backing for corrosion protection extending service and pad life. The thermal scorching process on these pads allow for break in, thereby achieving optimal braking performance faster. It is not designed for track use. To achieve maximum braking performance, the Z26 Street Performance brake pads are best used with Power Stop brake rotors (sold separately).

Each set comes with high-quality stainless steel hardware, pin bushing, and installation instructions for a complete installation. They are designed as direct bolt-on upgrades to your OEM ones to ensure hassle-free installation. The C7 Corvette Power Stop Z26 Brake Pads are backed by a 30-day warranty against defects in materials and craftsmanship.

Fitment: C7 Corvette Stingray, Grand Sport and Z06 - 2014, 2015, 2016, 2017, 2018 and 2019

C7 Corvette Power Stop Z23 Brake Pads

The Z23 Carbon-fiber infused Ceramic Brake pads are Power Stop’s offering for Corvette owners who wants the best braking performance without sacrificing drivability. They are known for offering more grip compared to other aftermarket brands, minus the dust and noise. If you want better, safer, and smoother stopping power on your daily drive or commute, replace your faded stock ones with the C7 Corvette Powerstop Z23 Evolution Sport Carbon Fiber Brake Pads.

C7 Corvette Power Stop Z23 Brake Pads use a Carbon-fiber reinforced ceramic formula that is dust-free so you can keep your wheels protected from nasty brake dust, keeping them clean and looking great for a long time. This unique construction delivers superior braking performance while minimizing squealing and brake fade. C7 Corvette Powerstop Z23 Evolution Sport Carbon Fiber Brake Pads are virtually the most silent in the market with its built in dual layered rubberized shims and chamfered and slotted design. These high performance pads are also tested by a third party testers to further ensure noise-free stopping so you can enjoy your daily drive around town or commute to work. The powder coated backing plates protect against rust and corrosion, thereby extending pad life. They went through a thermal scorching process for easier and effective break-in to prevent rotor warping and achieve optimal braking performance. To achieve even greater stopping power, these are best used with PowerStop brake rotors (sold separately). Manufactured to strict OE tolerances, they are guaranteed for the perfect fit and smooth operation.

The Z23 Power Stop Brake Pads for C7 Corvette models are supplied with superior quality stainless steel hardware, pin bushing kit, and installation instructions for easy and complete installation. A high-temperature ceramic-based lubricant specially formulated for the Z23 series pads is also included in the kit. All C7 Corvette Power Stop Z23 Brake Pads are backed by a 30 day or 500-mile warranty against defects in materials and craftsmanship.

Fitment: C7 Corvette Stingray, Grand Sport and Z06 - 2014, 2015, 2016, 2017, 2018 and 2019

C7 Corvette Powerstop Z17 Brake Pads and Rotors

Whether you are a seasoned pro or beginning enthusiast looking for the perfect brakes for the track, the C7 Corvette Powerstop Z17 Track Day Brake Kit is your best choice. This kit comes with everything your C7 Corvette needs to achieve the braking strength need to win your weekend track days. The C7 Corvette Powerstop Z17 Brake Pads and Rotors are highly recommended for HPDEs (High Performance Driving Events) and track days.

PowerStop is the official brake supplier of the Bondurant Racing School so you are guaranteed to get high-quality parts offering race-proven performance for the win. These platform specific Z17 Track Day Power Stop Brake Kit offers the perfect combination of high-carbon rotors and carbon metallic brake pads to meet the braking demands of your high-performance driving. The Powerstop Brake Pads and rotors are designed to give you consistent pedal feel when making turns for maximum confidence and control. The combination of the rotors and pads allow for improved braking performance, longer life, and maximum stability even during aggressive driving and high temperatures. Its mill-balanced OE Style, non-coated rotors will deliver smooth and safe braking  performance in every corner. The PowerStop Track Day Brake Pads features Carbon-fiber metallic construction that provides extreme fade resistance and maximum cooling effects even at high speeds. The pads’ offer high coefficient of friction even in extreme cold or hot temperatures for consistency and smooth ride. The track-tested and race-proven C7 Corvette Powerstop Z17 Brake Pads and Rotors combo are exactly what you need to beat that checkered flag on your weekend track days.

C7 Corvette Powerstop Z17 Track Day Brake Kit is the complete package with everything you need from the rotors, pads, premium stainless steel hardware, and installation instructions. PowerStop designed this kit for an easy, hassle-free bolt-on installation.

Fitment: C7 Corvette Stingray - 2014, 2015, 2016, 2017, 2018 and 2019

Product Note: Fits Base Model Suspension (JL9)

Product Note: Will NOT fit Z51 Stingray, Grand Sport or Z06

Power Stop Brake Kit

The C7 Corvette Powerstop Z17 Stock Replacement Brake Kit is specially designed for the budget-conscious Corvette driver who wants a major upgrade in stopping power, minus the dust and noise. These Corvette Powerstop Z17 Brake Rotors and Pads are the complete replacement package for your OEM brakes that is perfect for daily driving and commuting.

C7 Corvette Powerstop Z17 Stock Replacement Brake Kit offers the unbeatable combination of Auto Specialty OE rotors and high-performance Z16 ceramic pads to boost your daily driver’s stopping power. The PowerStop Auto Specialty Rotors are checked and 100% mill balanced to guarantee smooth and safe braking performance. It is precision crafted to the exact specifications of your OE rotors for the perfect fit. The Z16 Evolution brake pads feature a carbon-fiber reinforced ceramic construction for superior braking performance, cleaner wheels, and longer service life. These ceramic pads are chamfered and slotted with dual layered rubberized shims to minimize noise when braking, so squealing will not be a problem. All PowerStop pads are tested using the “LA test” the same test used by vehicle m*anufacturers in new vehicles to ensure safer, smoother, and more reliable braking performance. Based on results, these Powerstop Ceramic pads deliver up to 20% more stopping power than other aftermarket brands and OE brake pads. The powder coated backing plate protects against corrosion and extends pad life while the thermal scorching treatment makes breaking-in easier and faster.

Power Stop Brake Kit components are meticulously manufactured to match the exact dimensions of your stock parts for the perfect fit and flawless operation. It comes complete with all necessary components for the total brake upgrade from rotors, evolution pads, high quality hardware, hi-temperature lubricant, and installation instructions. This stock replacement kit is designed for a hassle-free, bolt-on installation. This Z17 Power Stop Brake Kit for C7 Corvette models are backed by a 1-year warranty against defective materials and craftsmanship.

Fitment: C7 Corvette Stingray - 2014, 2015, 2016, 2017, 2018 and 2019

Product Note: Fits Base Model Suspension (JL9)

Product Note: Will NOT fit Z51 Stingray, Grand Sport or Z06

C7 Corvette Powerstop Z23 Brake Upgrade Kit

PowerStop Brakes are known to Corvette owners for their superior quality and maximum stopping power. If your OE system is already worn out and faded or you are just not satisfied with its braking performance, it’s time to upgrade to the Z23 Evolution Sport Upgrade kit.

All the braking improvement of the C7 Corvette Powerstop Z23 Evolution Sport Brake Kit begins with its drilled and slotted rotors. The Z23 Evolution Sport Brake rotors are precision machined using Power Stop’s Tru Cast technology with the finest G3000 material for the ultimate stopping power. It has rounded slots that keep dust, water, and gas away to maintain a clean contact patch with the pads. The holes are precision drilled and beveled for maximum cooling effects especially during high performance braking.  They are mill balanced to reduce vibrations and Silver Zinc Dichromate plated for corrosion resistance during normal use. The C7 Corvette Powerstop Z23 Brake Upgrade Kit features Carbon-Ceramic brake pads that deliver consistent stopping power that is great for commuting, daily driving, and all other driving conditions. Compared to other brands, the Z23 Evolution pads offer up to 20% more braking power without sacrificing drivability and performance.  The Carbon fiber infused ceramic construction of these pads minimize dust and reduce fading while virtually being silent. The Z23 Evolution brake pads went through a thermal scorching process for faster break in and the powder-coated backing plate prevents rust buildup. All the parts of the C7 Corvette Powerstop Z23 Brake Upgrade Kit are precision designed to the exact measurements of your OE parts to guarantee the perfect fit and smooth operation.

This high-performance brake upgrade kit is the complete package, it includes everything you need like rotors, pads, and premium quality stainless steel hardware. Its designed for a direct bolt-on installation. The rotors and pads in the C7 Corvette Powerstop Z23 Evolution Sport Brake Kit are backed by a 3-year/36,000 mile warranty.

Fitment: C7 Corvette Stingray, Grand Sport and Z06 - 2014, 2015, 2016, 2017, 2018 and 2019