Corvette Intake Systems

C8 Corvette PVC Oil Catch Can

C8 Corvette Corsa Oil Catch Can - CC0005. Corsa Oil Catch Cans are manufactured with high grade 6061 Aluminum and feature a multi stage oil separation chambers. Each PCV oil catch can has been designed and engineered with OEM quick disconnect fittings for easy access and quick cleaning. A bronze filter prevents oil vapor re-entry and ensures that the gases stay in the can and properly condense. Included with each C8 Corvette Oil Catch Can is a power coated bracket for easy mounting, multi reinforced hoses and a threaded can housing. Installation time is approximately 30 minutes and requires basic hand tools. Corsa CC0005 is for Coupes only

LTx engines all suffer from oil blow by into the intake manifold and runners under hard driving conditions. The PVC system or Positive Crankcase vent is engineered to vent and release crankcase pressure that otherwise could cause oil leaks or blown seals. The C8 Corvette PVC Oil Catch Can helps trap oil vapor and gasses and separate them into a holding chamber instead of letting them into your intake system. The major benefit to installing an Catch Can on your C8 Corvette is that it prevents the gumming up of your air systems and help prevent carbon build up on your valves. Thoughtful design locates the oil catch can in an easily accessible, yet safe location for easy cleaning

CORSA’s drive to produce the world’s best C8 Corvette Oil PVC Oil Catch Can is evident throughout every aspect of its design. From its earlier conception through its final development, the C8 Corvette Corsa Oil Catch Can had you the end user in mind and performance at the forefront of manufacturing and quality.

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray Coupe

C8 Corvette Stingray Carbon Fiber Cold Air Intake

C8 Corvette Corsa Carbon Fiber Intake - 44003D.  The C8 was worth the wait and now it is time to add the best-in-class Cold Air Intake system from Corsa. Early reviews rave about the amazing sound and increase in throttle response. Designed for a snug fit with the classic beautiful finish expected from Carbon Fiber but also one that is very strong and lightweight and built to perform.

In the late 1950's high tensile strength carbon fibers were discovered and it did not take long before the benefits of these high-strength fibers were clear. They weighed a fraction of the weight of steel, yet contained much greater tensile strength.  In the pursuit of ultimate performance, the C8 Corvette Stingray Carbon Fiber Cold Air Intake takes advantage of this by using two dry tech high performance free flowing filters inside an enclosed case. The result is an increase in horsepower and torque with a 50,000 mile maintenance schedule.

CORSA’s drive to produce the world’s best air intake systems is evident throughout every aspect of the business. From its earlier conception through its final development, the C8 Corvette Corsa Carbon Fiber Intake system had you the end user in mind and performance at the forefront of manufacturing and quality.

Due to the snug fit required by the mid-engine changes to the Chevy Corvette C8 design, installation will require a touch of patience if you are going to give it a go on your own as it rates at the high end of difficulty. CORSA recommends that the installation of this system be performed by a qualified service center or professional installer who has the necessary equipment, tools, and experienced personnel.

C8 Corvette Corsa Carbon Fiber Intake System remain the standard by which all other air intake systems are measured.

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray Coupe and Hard top Convertible

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C7 Corvette RED Carbon Fiber Cold Air Intake

C7 Corvette Corsa Intake - RED Carbon Fiber - Oiled Filter - 44001-R. Years of high tech air flow experience has given birth to the only Red Carbon Fiber Intake on the Market. Corsa is driven with their passion to provide all automotive enthusiast the ultimate driving experience and the performance of the C7 Corvette RED Carbon Fiber Cold Air Intake is no exception. All their intakes are made using only the highest quality of standards and cutting-edge technology. Using their advanced understanding of airflow, they have created a Cold Air Intake for the Chevy C7 Corvette that will deliver more power, even in the toughest driving environments. The C7 Corvette Corsa Cold Air Intake will take your engine’s performance to the top and the stunning Carbon Fiber will give you a big smile every time you open your hood

When you bolt on a brand new C7 Corvette Red Carbon Fiber Cold Air Intake, you can expect gains of up to 15 hp and 15 ft-lbs torque. Thanks to its cutting-edge design and top-grade materials. It features 100% carbon fiber construction for lightweight toughness and efficient air flow. Part number 44001 uses Corsa’s Oiled 3D air filter that delivers superb filtration performance. It guarantees up to 98% filtration efficiency using a traditional, high flow Oiled Filer. The 3D air filter is so much better at trapping damaging particles than traditional cone filters by utilizing their unique pleating geometry. Overall, the C7 Corvette Corsa Intake will outflow your stock intake by up to 14% for the impressive power boost and engine efficiency. No Tune Required and will not set of a Check Engine Light.

The C7 Corvette Corsa Carbon Fiber Cold Air Intake system includes a Mass Air Flow (MAF) sealing gasket, rubber grommet, silicone coupler, band clamps, M4 allen head screws, rubber backed sealing washers, and detailed instructions for a complete and easy installation. C7 Corvette Corsa Intake is backed by a limited lifetime warranty. Part Number 44001 is Federal (EPA) compliant ONLY, it is not legal for installation on vehicles registered in California and other states that follow CARB standards. All Corsa exhaust and intake products are proudly designed and manufactured in the USA.

Fitment: C7 Corvette Stingray and Grand Sport. 2014, 2015, 2016, 2017, 2018, 2019

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

Product Note: Will Not Fit C7 Corvette Z06

C7 Corvette Red Carbon Fiber Intake - Dry Filter

Corsa is driven with their passion to provide all automotive enthusiast the ultimate driving experience. All their intakes are manufactured using only the highest quality of standards and cutting-edge technology. Using their advanced understanding of airflow, they have created a Cold Air Intake for the Chevy C7 Corvette that will deliver more power, even in the toughest driving environments. The C7 Corvette Corsa Intake will take your engine’s performance to the top through massive airflow improvements and horsepower gains.

 When you bolt on a brand new C7 Corvette Red Carbon Fiber Intake, your Vette will instantly gain up to 15 hp and 15 ft-lbs torque without a tune! Thanks to its cutting-edge design and top-grade materials. It features 100% carbon fiber construction for lightweight toughness and efficient air flow. Part number 44001D-R uses Corsa’s DryTech 3D air filter that delivers superb filtration performance. It guarantees up to 98% filtration efficiency using hydrophobic polysynthetic fibers that extends maintenance intervals by up to 50,000 miles depending on driving conditions. The DryTech 3D air filter is so much better at trapping damaging particles than traditional cone filters by utilizing their unique pleating geometry. Overall, the C7 Corvette Corsa Intake will outflow your stock intake by up to 14% for the impressive power boost and engine efficiency.

 The C7 Corvette Corsa Carbon Fiber Cold Air Intake system includes a Mass Air Flow (MAF) sealing gasket, rubber gromet, silicone coupler, band clamps, M4 allen head screws, rubber backed sealing washers, and detailed instructions for a complete and easy installation. C7 Corvette Corsa Intake is backed by a limited lifetime warranty. Part Number 44001D is Federal (EPA) compliant ONLY, it is not legal for installation on vehicles registered in California and other states that follow CARB standards. All Corsa exhaust and intake products are proudly designed and manufactured in the USA.

Fitment: C7 Corvette Stingray and Grand Sport. 2014, 2015, 2016, 2017, 2018, 2019

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

Product Note: Will Not Fit C7 Corvette Z06

C7 Corvette Carbon Fiber Cold Air Intake

Years of high tech air flow experience has given birth to one of the most stunning Carbon Fiber Intake on the Market. Corsa is driven with their passion to provide all automotive enthusiast the ultimate driving experience and the performance of the C7 Corvette Carbon Fiber Cold Air Intake is no exception. All their intakes are made using only the highest quality of standards and cutting-edge technology. Using their advanced understanding of airflow, they have created a Cold Air Intake for the Chevy C7 Corvette that will deliver more power, even in the toughest driving environments. The C7 Corvette Corsa Cold Air Intake will take your engine’s performance to the top and the stunning Carbon Fiber will give you a big smile every time you open your hood

 When you bolt on a brand new C7 Corvette Carbon Fiber Cold Air Intake, you can expect gains of up to 15 hp and 15 ft-lbs torque. Thanks to its cutting-edge design and top-grade materials. It features 100% carbon fiber construction for lightweight toughness and efficient air flow. Part number 44001 uses Corsa’s Oiled 3D air filter that delivers superb filtration performance. It guarantees up to 98% filtration efficiency using a traditional, high flow Oiled Filer. The 3D air filter is so much better at trapping damaging particles than traditional cone filters by utilizing their unique pleating geometry. Overall, the C7 Corvette Corsa Intake will outflow your stock intake by up to 14% for the impressive power boost and engine efficiency. No Tune Required and will not set of a Check Engine Light.

The C7 Corvette Corsa Carbon Fiber Cold Air Intake system includes a Mass Air Flow (MAF) sealing gasket, rubber grommet, silicone coupler, band clamps, M4 allen head screws, rubber backed sealing washers, and detailed instructions for a complete and easy installation. C7 Corvette Corsa Intake is backed by a limited lifetime warranty. Part Number 44001 is Federal (EPA) compliant ONLY, it is not legal for installation on vehicles registered in California and other states that follow CARB standards. All Corsa exhaust and intake products are proudly designed and manufactured in the USA.

Fitment: C7 Corvette Stingray and Grand Sport. 2014, 2015, 2016, 2017, 2018, 2019

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

Product Note: Will Not Fit C7 Corvette Z06

C7 Corvette Carbon Fiber Intake

Corsa is driven with their passion to provide all automotive enthusiast the ultimate driving experience. All their intakes are manufactured using only the highest quality of standards and cutting-edge technology. Using their advanced understanding of airflow, they have created a Cold Air Intake for the Chevy C7 Corvette that will deliver more power, even in the toughest driving environments. The C7 Corvette Corsa Intake will take your engine’s performance to the top through massive airflow improvements and horsepower gains.

 When you bolt on a brand new C7 Corvette Carbon Fiber Intake, your Vette will instantly gain up to 15 hp and 15 ft-lbs torque without a tune! Thanks to its cutting-edge design and top-grade materials. It features 100% carbon fiber construction for lightweight toughness and efficient air flow. Part number 44001D uses Corsa’s DryTech 3D air filter that delivers superb filtration performance. It guarantees up to 98% filtration efficiency using hydrophobic polysynthetic fibers that extends maintenance intervals by up to 50,000 miles depending on driving conditions. The DryTech 3D air filter is so much better at trapping damaging particles than traditional cone filters by utilizing their unique pleating geometry. Overall, the C7 Corvette Corsa Intake will outflow your stock intake by up to 14% for the impressive power boost and engine efficiency.

 The C7 Corvette Corsa Carbon Fiber Cold Air Intake system includes a Mass Air Flow (MAF) sealing gasket, rubber gromet, silicone coupler, band clamps, M4 allen head screws, rubber backed sealing washers, and detailed instructions for a complete and easy installation. C7 Corvette Corsa Intake is backed by a limited lifetime warranty. Part Number 44001D is Federal (EPA) compliant ONLY, it is not legal for installation on vehicles registered in California and other states that follow CARB standards. All Corsa exhaust and intake products are proudly designed and manufactured in the USA.

Fitment: C7 Corvette Stingray and Grand Sport. 2014, 2015, 2016, 2017, 2018, 2019

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

Product Note: Will Not Fit C7 Corvette Z06

C7 Corvette Z06 Carbon Fiber Intake

C7 Corvette Corsa Carbon Fiber Intake 44002D - Z06 is the Intake that looks as good as it performs specifically made to take your 2015-2019 Chevrolet C7 Z06 6.2L V8 to the next level. The product alone is an art piece in the style and function with the best in carbon fiber construction designed for maximum strength and performance. Beauty is in the eyes of the beholder and this one fits the bill, deserving of a center fold.

This has been dyno tested and aftermarket approved as the C7 Corvette Z06 Carbon Fiber Intake system produces up to an additional 44HP and 70 FT LBS TQ from the LT-4 engine without requiring a tune. Say it isn’t so with performance results from a CAI that is a simple and direct bolt on system that will have you on the road and enjoying the results in less than an hours’ time.

Beginning in 2012, CORSA entered the Air Intake market with a range of products that took advantage of their advanced understanding of airflow. The C7 Corvette Z06 Carbon Fiber Intake takes advantage of this knowledge by utilizing Free-Flowing High-Performance DryTech Filter that features easy cleaning and maintenance 

Every CORSA product is engineered and designed to match the unique properties of the C7 Corvette and it is designed to deliver perfect fitment and performance. CORSA Performance C7 Corvette air intake products are backed by a Limited Lifetime warranty for as long as you own your vehicle with proof of purchase. One year for DryTech 3D filter.

Driven with a relentless passion to deliver the ultimate automotive driving experience, CORSA Performance uses advanced engineering technologies to create market leading & cutting-edge products for the automotive enthusiast.

Fitment: 2015, 2016, 2017, 2018, 2019 C7 Corvette Z06

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C7 Corvette Z06 Carbon Fiber Cold Air Intake

C7 Corvette Corsa Carbon Fiber Intake 44002 - Z06 is the Cold Air Intake that looks as good as it performs specifically made to take your 2015-2019 Chevrolet C7 Z06 6.2L V8 to the next level. The product alone is an art piece in the style and function with the best in carbon fiber construction designed for maximum strength and performance. Beauty is in the eyes of the beholder and this one fits the bill, deserving of a center fold.

This has been dyno tested and aftermarket approved as the C7 Corvette Z06 Carbon Fiber Cold Air Intake system produces up to an additional 44HP and 70 FT LBS TQ from the LT-4 engine without requiring a tune. Say it isn’t so with performance results from a CAI that is a simple and direct bolt on system that will have you on the road and enjoying the results in less than an hours’ time.

Beginning in 2012, CORSA entered the Air Intake market with a range of products that took advantage of their advanced understanding of airflow. The C7 Corvette Z06 Carbon Fiber Cold Air Intake takes advantage of this knowledge by utilizing Free-Flowing High-Performance Filtration that features CORSA's High Flow 5 Layer Oiled Cotton Gauze MaxFlow 5 Filter.

Every CORSA product is engineered and designed to match the unique properties of the C7 Corvette and it is designed to deliver perfect fitment and performance. CORSA Performance C7 Corvette air intake products are backed by a Limited Lifetime warranty for as long as you own your vehicle with proof of purchase. One year for DryTech 3D and MaxFlow 5 filters.

Driven with a relentless passion to deliver the ultimate automotive driving experience, CORSA Performance uses advanced engineering technologies to create market leading & cutting-edge products for the automotive enthusiast.

Fitment: 2015, 2016, 2017, 2018, 2019 C7 Corvette Z06

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C6 Corvette Z06 Corsa Cold Air Intake 44108-1

Corsa C6 Corvette Z06 Intake. Let your C6 Corvette Z06 a breath of fresh air with the Corsa Carbon Fiber Intake System. Manufactured with a High Quality Carbon Fiber Air Bridge, you can expect up to 15 additional Horsepower and an average intake 10 degrees lower than the OEM system. Red Cloth Filter provides superior particle filtration. Designed and engineered specifically for the C6 Corvette Z06.

Fitment: C6 Corvette Z06 (2006 - 2013)

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C6 Corvette Corsa Intake 44108-1

Corsa C6 Corvette LS3 Intake. Let your C6 Corvette 6.2L LS3  have a huge breath of fresh air with the Corsa Carbon Fiber Intake System. Manufactured with a High Quality Carbon Fiber Air Bridge, you can expect up to 21 additional Horsepower and an average intake 10 degrees lower than the OEM system. Red Cloth Filter provides superior particle filtration. Designed and engineered specifically for the C6 Corvette LS3 with a 6.2L Engine.

Fitment: C6 Corvette LS3 (2008 - 2013)

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.