Corvette Intake Systems

C6 Corvette Z06 Volant Intake

Volant Cold Air Intake - C6 Corvette Z06. Volant Intakes are constructed of cross linked polymers that make this one of the sturdiest intakes you can buy for your C6 Corvette Z06, and is a favorite of Corvette enthusiasts that track their car. This Volant Cold Air Intake uses a cleanable and re-usable five layer high velocity cotton filter that provides 99.97% particle filtration. When you need your intake to perform under the harshest conditions, it has to be Volant.

Fitment: C6 Corvette Z06 (2006 - 2013)

C6 Corvette Volant Intake

Volant Cold Air Intake - C6 Corvette. Volant Intakes are constructed of cross linked polymers that make this one of the sturdiest intakes you can buy for your C6 Corvette, and is a favorite of Corvette enthusiasts that track their car. This Volant Cold Air Intake uses a cleanable and re-usable five layer high velocity cotton filter that provides 99.97% particle filtration. When you need your intake to perform under the harshest conditions, it has to be Volant.

Fitment: C6 Corvette and Grand Sport (2005 - 2013)

Vararam Throttle Spacer for the LS3 C6 Corvette

Vararam Power Wedge - C6 Corvette LS3. Bolt on power with the Vararam Power Wedge. Simple and easy to install this modified spacer can add up to 10 ft/lbs of torque and 14 HP to stock LSx engines. It secret, the modified angle which allows 100% of the lower pathway to open, increasing throttle response and velocity. The Power Wedge is also designed to balance the plenum inside the manifold which allows vacuum to pull across the entire neck area. This improved air flow reduces pressure drop and increases air flow volume. The rear of the Power Wedge has an integrated "air horn" which boosts the airs velocity just before it enters the body of the intake. Bolt on power with the Vararam Power Wedge.

Fitment: C6 Corvette and Grand Sport (2008, 2009, 2010, 2011, 2012 and 2013) LS3

C6 Corvette LS2 Vararam Throttle Spacer

Vararam Power Wedge - C6 Corvette LS2. Bolt on power with the Vararam Power Wedge. Simple and easy to install this modified spacer can add up to 10ftlbs of torque and 14 HP to stock LSx engines. It secret, the modified angle which allows 100% of the lower pathway to open, increasing throttle response and velocity. The Power Wedge is also designed to balance the plenum inside the manifold which allows vacuum to pull across the entire neck area. This improved air flow reduces pressure drop and increases air flow volume. The rear of the Power Wedge has an integrated "air horn" which boosts the airs velocity just before it enters the body of the intake. Bolt on power with the Vararam Power Wedge. VRX-93 (Previously VRX-92)

Fitment: C6 Corvette (200, 2006 and 2007) LS2

Vararam VR-SC1R Snake Charmer Intake (2008-2013)

Turbocharge your C6 Corvette LS3 intake with the Vararam VR-SC1R, delivering a 3.0-tenths/3.5-MPH quarter-mile boost and heightened torque. This elite cold air system displaces the factory airbox, ushering in a torrent of fresh air for a thrilling ride, with no tuning required. Crafted for performance enthusiasts, it adapts to street cruises or drag strips, featuring cross-link polymer construction and a Billet Air Meter that amplifies air throughput.

Built with a sturdy cross-link polymer intake and a heat-dampening shield, the VR-SC1R draws in cooler air, validated by dyno runs across varied conditions. Its Green Performance Filter, washable and reusable, captures 98% of particulates, ensuring lasting power with minimal upkeep—clean and re-oil as needed—celebrated by drivers for consistent strength.

Installation is straightforward, completed in about an hour with basic tools, and includes a Throttle Body Spacer and clear instructions. Owners applaud the crisper revs, richer intake growl, and better fuel efficiency, ideal for 2008-2013 C6 LS3 models. The kit supports easy removal, though it’s not permitted in California.

Why Choose Vararam VR-SC1R?

• Boosts quarter-mile by 3.0 tenths/3.5 MPH
• Elevates torque and responsiveness
• No tuning required
• Cross-link polymer construction
• Washable Green Performance Filter
• 98% filtration efficiency
• Simple bolt-on setup
• Racing-tested design

What to Expect

• Crisper engine revs
• Noticeable power surge
• Improved fuel economy
• Deeper intake resonance
• Reliable performance
• Pride in a track-ready mod

Corvette Compatibility

• C6 Corvette Base, Grand Sport, Z06: 2008, 2009, 2010, 2011, 2012, 2013
• Fits all LS3-equipped C6 models, including Coupe and Convertible
• Compatible with LS7-equipped Z06 models
• Not legal for sale in California due to CARB rules

What Corvette Owners Say

“The Vararam VR-SC1R made my LS3 a beast—quarter-mile gains are unreal!” - Chris, C6 Owner

Discover more performance upgrades in our C6 Corvette Intake Collection.

Fast nationwide shipping—your Corvette parts delivered with care.

C6 Corvette LS2 Vararam Cold Air Intake System

Vararam VR-SC1 Snake Charmer Intake (2005-2007)

Recharge your C6 Corvette LS2 intake with the Vararam VR-SC1, sparking a wave of torque and superior drivability. This groundbreaking dynamic air system removes the factory airbox, ushering in a flood of cool air for an exhilarating drive, with no tuning required. Designed for performance fans, it integrates seamlessly into daily jaunts or track sprints, featuring custom aerodynamic shaping that optimizes peak airflow, forged from Vararam’s racing heritage. Its innovative design enhances power delivery, captivating drivers with a responsive, exhilarating feel, improved handling on winding roads, and a more commanding presence across every mile.

Engineered with a reinforced polymer intake and a heat-shielding panel, the VR-SC1 draws in chilled air, honed through a year of dyno testing across diverse scenarios like open highways and tight turns. Its high-performance filter, washable and reusable, traps 98% of contaminants, delivering sustained power with easy maintenance—clean and re-oil as needed—praised by drivers for reliable strength during shift recovery and demanding drives. The sleek contour boosts the C6’s dynamic presence with a polished finish that endures harsh conditions.

Installation is seamless, completed in under an hour with basic tools, and includes detailed instructions. Owners delight in the sharper shifts, deeper engine resonance, improved fuel economy, smoother power delivery, heightened responsiveness, and a more engaging driving experience, perfect for 2005-2007 C6 LS2 models. The kit permits easy removal if needed, offering versatility, though it’s not approved for California due to emissions laws—a key legal note.

Why Choose Vararam VR-SC1?

• Enhances torque and drivability
• Optimizes peak airflow
• No tuning required
• Reinforced polymer construction
• Washable high-performance filter
• 98% filtration efficiency
• Simple bolt-on fit
• Racing-developed design

What to Expect

• Crisper shift performance
• Deeper engine tone
• Improved fuel savings
• Enhanced throttle response
• Reliable power delivery
• Pride in a performance lift

Corvette Compatibility

• C6 Corvette Base: 2005, 2006, 2007
• Fits all LS2-equipped C6 models, including Coupe and Convertible
• Not legal for sale in California due to CARB rules

What Corvette Owners Say

“The Vararam VR-SC1 elevated my LS2’s torque—driving is pure joy!” - Michael, C6 Owner

Discover more performance upgrades in our C6 Corvette Intake Collection.

Speedy, secure shipping for Corvette enthusiasts nationwide.

Soler Performance C6 Corvette Throttle Body

The C6 Corvette Soler Performance Throttle Body - 90mm -gives you improved throttle response and smooth air flow for more power and faster response times. This highly worked C6 Corvette Throttle Body Features: Porting Taper and Upstream Bore with Velocity Stack, Greater Discharge Coefficient of the plate / blade interface, Optimized Active Contour with Sonic Flow nozzles, 16 Ra Microinch Diamond Polished Surface Finish, Shaftless high pressure side of the blade for larger Wide Open Throttle flow area, Dome and Threaded locked screws, Dimpled shaft trailing edge and a Self cleaning Throat/Flow Gap.

"Buy and Try" No Questions Asked 30 Day Money Back Guarantee!

All the engineering and testing gives the Soler Performance C6 Corvette Throttle Body distinct and real world advantages over all the competition. The benefits include: a Lower power to weight ratio at part throttle, for a more nimble and spirited driving experience, Linearization and smoothing of the curve for a crisper and more predictable response, Improved Idle response that does not interfere with the normal idle function, more air and more power at EVERY SINGLE throttle position and provides a great base for starting or building on your current modifications. The C6 Corvette Soler Performance Throttle Body SEO790-95 and SE109-95 is a warranty safe modification and will no void your factory warranty. No Tune is required

Fitment: C6 Corvette LS2 and LS3 - 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, and 2013

SLP Blackwing Cleaning Kit 25017

Air Filter Cleaner and Oil Kit from SLP. Keep your SLP Blackwing Air Filter clean with an official kit from Street Legal Performance. Properly clean and oil your Blackwing Air Filter with this kit from SLP. The Blackwing Air Filter Cleaner and Oil Kit is designed specifically for the special synthetic media in the Blackwing Air Filters (unlike most other air filter which use ordinary cotton fiber). Maintaining your air filter properly will give you maximum filtration and life. and unrestricted flow.

C6 Corvette SLP Cold Air Intake

Eliminating your restrictive stock air box is the first step in making more power from your Chevy Corvette C6. The next and the most important step is to replace it with the massive and high quality Blackwing Cold Air Intake System by Street Legal Performance. SLP has been making C6 Corvette SLP Blackwing Intake that has been exceeding industry standards since 2008. Like all SLP Corvette Parts, the C6 Corvette SLP Cold Air Intake is designed using the best CAD techniques, constructed with the finest materials, and tested to rigorous quality standards for higher power gains and consistent performance.

The C6 Corvette Z06 Blackwing Intake Kit features a distinctive design that outflows your stock air box by up to 90%. It has been dyno-tested to add up to 10 horsepower and 11 ft./lbs of torque. Its unique appearance called the “Blackwing” uses a high-flow, massive, blue air filter that is wire-reinforced and completely reusable. The filter media requires re-oiling after use to maintain maximum filtration for re-use. Its built-in flow indicator changes its color when cleaning is required. C6 Corvette SLP Blackwing Intake requires part number 25017 air filter cleaning kit when re-oiling or cleaning its air filter.

The C6 Corvette SLP Cold Air Intake System comes complete with all necessary parts and installation instructions for a complete install. The kit includes secure mounting points, intake tube, and OE style finished air-bridge with integrated Mass Air Flow (MAF) housing. This SLP Blackwing Cold Air Intake for Chevrolet C6 Corvette models allow for a direct bolt-on installation using common tools, no cutting or modifications required. This product is intended for Racing or competitions only, it is not recommended for use on vehicles driven in public streets and highways. SLP 21121 is not legal for sale or use in California and other states following CARB standards.

Free Shipping

Fitment: C6 Corvette Base LS3, Corvette Grand Sport and Z06 (2008 - 2013)

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

2701 MSD Atomic Airforce Intake Manifold - C6 Corvette

C6 Corvette MSD Atomic Airforce Intake Manifold for your LS2 or LS7 powered Corvette. The all new MSD Airforce Intake Manifold delivers maximum airflow and distribution to improve the performance of your stock or modified LS1/2/6 Engine. This C6 Corvette Intake Manifold was designed, engineered and produced from the ground up, using Computational Fluid Dynamic Modeling to address the OEM intakes performance short comings giving you optimized airflow and solid performance gains across the RPM range. MSD was able to optimize the plenum volume and re-arrange the runner layout, giving you better air flow, less resistance and more horsepower. The unique bell mouthed runner openings, optimized length and minimal shrouding insure proper airflow and cylinder balance. The MSD Atomic Airforce Intake Manifold for the C6 Corvette is a two piece glass reinforced polymer design which allows for custom port matching, reduces overall weight and reduces power robbing heat soak. C6 Corvette MSD Atomic Airforce Intake Manifold accepts the OEM Electronic throttle body, as well as performance throttle bodies up to 103mm. Make more horsepower and torque with the MSD Atomic Airforce Manifold, Dyno testing shows 25+ Horsepower and 20+ ft/lbs of Torque gains just from bolting on this impressive intake manifold and more power can be found in highly modified engines. The Atomic Airforce Manifold is 50 State Legal, so this is a great modification for people living in CARB Certified States. Give your C6 Corvette the extra power you are looking for with an MSD Atomic Airforce Intake Manifold. P/N 2701 and 2702

Fitment: C6 Corvette LS2 Engine and C6 Corvette Z06 LS7 (2006 - 2013)

Product Note: Legal for sale in California: C.A.R.B Certification EO #D-722-1

C6 Corvette ZR1 K&N 63-3080

63-3080 K&N Cold Air Intake - C6 Corvette ZR1. Improve the air flow and throttle response on your C6 Corvette ZR1 with a Cold Air Intake from K&N. Engineered specifically for the C6 Corvette ZR1 Engine, the K&N Intake replace the factory air box and reduces air restriction. The specially designed polyethylene air intake tube increases the air speed and straightens it out, resulting in an additional 12 horsepower and improved fuel economy. The K&N Cold Air Intake system accommodates the factory MAF and Crank Case Vent Hose. Install with basic hand tools and does not require any permanent modification to your car. Increase the power and performance of your C6 Corvette ZR1 with a Cold Air Intake from K&N.

Free Shipping

Fitment: C6 Corvette ZR1

Product Note: Not legal for Highway use in States adopting California emissions regulations. Not legal for sale in California.

K&N 63-3060-1 AirCharger (2005-2013)

Ignite your C6 Corvette Z06 intake with the K&N 63-3060-1, releasing up to 12 horsepower and heightened torque. This advanced cold air system swaps the restrictive factory airbox, channeling a rush of fresh air for an exhilarating ride, with no tuning required. Crafted for performance enthusiasts, it integrates smoothly into daily drives or track runs, featuring a custom polyethylene tube that enhances airflow and durability, supported by K&N’s trusted legacy. Its streamlined design reduces turbulence, delivering a thrilling boost that transforms your drive, appealing to owners who demand power and a bold aesthetic.

Designed with a precision-molded polyethylene intake and a heat-deflecting shield, the 63-3060-1 draws in cooler air, proven through extensive dyno testing across diverse conditions like high-speed tracks and city streets. Its large oiled cotton filter captures 98% of debris, offering extended use with minimal upkeep—clean and re-oil as needed—praised by drivers for steady power on roads or racetracks. The sleek design boosts the Z06’s aggressive stance, sharpening throttle response, while its robust build withstands harsh climates, captivating those who value precision engineering and performance.

Setup is quick, taking less than 90 minutes with basic tools, and comes with K&N’s million-mile warranty for long-term confidence. Owners cheer the richer engine tone, brisker acceleration, and smoother power delivery, perfect for 2005-2013 C6 Z06 models. The kit includes clear instructions and fittings, designed for easy removal if needed, though it’s not permitted on California highways due to emissions regulations—a key consideration for legal use in regulated states.

Why Choose K&N 63-3060-1?

• Unlocks up to 12 HP
• Enhances torque and response
• No tuning necessary
• Heat shield optimizes air temperature
• Reusable oiled filter for durability
• 98% filtration effectiveness
• Easy bolt-on installation
• Million-mile warranty

What to Expect

• Quicker throttle action
• Noticeable power gain
• Improved fuel economy
• Deeper engine sound
• Reliable operation
• Pride in a performance boost

Corvette Compatibility

• C6 Corvette Z06: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
• Fits all LS7-equipped C6 Z06 models, including Coupe
• Not legal for sale in California due to CARB rules

What Corvette Owners Say

“The K&N 63-3060-1 turned my Z06 into a beast—throttle’s alive!” - Paul, C6 Owner

Discover more performance upgrades in our C6 Corvette Intake Collection.

Speedy, secure shipping for Corvette enthusiasts nationwide.

K&N 63-3073 AirCharger (2008-2013)

Rev up your C6 Corvette LS3 intake with the K&N 63-3073, unleashing up to 12 horsepower and enhanced torque. This innovative cold air setup replaces the cramped factory airbox, ushering in a wave of cool air for a spirited ride, with no tuning needed. Tailored for performance lovers, it slips perfectly into daily commutes or track days, built with a sturdy polyethylene tube that optimizes airflow and resilience, backed by K&N’s proven excellence. Its aerodynamic shape minimizes drag, delivering a pulse-pounding boost that redefines your drive, captivating owners who crave power and a striking presence.

Engineered with a custom polyethylene intake and a heat-resistant shield, the 63-3073 pulls in chilled air, verified by thorough dyno tests across varied driving scenes like high-speed tracks and urban routes. Its wide oiled cotton filter traps 98% of dust, promising durability with easy maintenance—wash, dry, and re-oil as needed—admired by drivers for reliable power on streets or circuits. The sleek profile enhances the LS3’s bold look, quickening throttle response, while its robust build thrives in extreme weather, appealing to enthusiasts who value performance and rugged dependability.

Installation is a cinch, wrapping up in under 90 minutes with basic tools, and supported by K&N’s million-mile warranty for enduring trust. Owners applaud the deeper engine hum, snappier acceleration, and smoother power flow, ideal for 2008-2013 C6 LS3 models. The package comes with detailed guides and fittings, crafted for easy removal if desired, though it’s restricted from California roads due to emissions rules—a critical note for legal use in regulated states.

Why Choose K&N 63-3073?

• Releases up to 12 HP
• Boosts torque and reactivity
• No tuning required
• Heat shield cools air intake
• Reusable oiled filter for longevity
• 98% dust filtration rate
• Simple bolt-on fit
• Million-mile warranty

What to Expect

• Faster throttle response
• Clear power increase
• Enhanced fuel savings
• Rich engine tone
• Steady performance
• Satisfaction in a performance lift

Corvette Compatibility

• C6 Corvette LS3 (Base, Grand Sport): 2008, 2009, 2010, 2011, 2012, 2013
• Fits all 6.2L LS3-equipped C6 models, including Coupe and Convertible
• Not legal for sale in California due to CARB rules

What Corvette Owners Say

“The K&N 63-3073 made my LS3 roar—acceleration’s a thrill!” - Lisa, C6 Owner

Discover more performance upgrades in our C6 Corvette Intake Collection.

Corvette parts shipped nationwide—fast delivery you can trust.

K&N 57-3052 AirCharger (2005-2007)

Supercharge your C6 Corvette LS2 intake with the K&N 57-3052, tapping into up to 12 horsepower and boosted torque. This dynamic cold air solution ditches the tight factory airbox, inviting a flood of cool air for a vibrant drive, with no tuning required. Designed for performance aficionados, it slots effortlessly into routine drives or track outings, featuring a tailored polyethylene tube that amplifies airflow and strength, rooted in K&N’s celebrated reputation. Its aerodynamic curve minimizes resistance, unleashing a thrilling surge that redefines your journey, captivating owners who crave power and a commanding presence.

Shaped with a custom polyethylene intake and a heat-repelling shield, the 57-3052 draws in crisp air, confirmed by rigorous dyno evaluations across multiple driving environments like high-speed circuits and city traffic. Its broad oiled cotton filter seizes 98% of grit, ensuring long-lasting performance with simple maintenance—wash, dry, and re-oil as needed—hailed by drivers for dependable power on roads or racetracks. The streamlined form accentuates the LS2’s sleek profile, heightening throttle response, while its sturdy build endures extreme conditions, appealing to enthusiasts who value performance and resilience.

Installation is swift, finishing in under 90 minutes with basic tools, and backed by K&N’s million-mile warranty for lasting assurance. Owners rave about the bolder engine note, crisper acceleration, and smoother power flow, perfect for 2005-2007 C6 LS2 models. The kit includes clear instructions and components, built for easy uninstallation if needed, though it’s prohibited on California highways due to emissions regulations—a critical note for legal use in regulated states.

Why Choose K&N 57-3052?

• Unlocks up to 12 HP
• Enhances torque and responsiveness
• No tuning needed
• Heat shield improves air quality
• Reusable oiled filter for durability
• 98% filtration capability
• Easy bolt-on design
• Million-mile warranty

What to Expect

• Swifter throttle reaction
• Evident power surge
• Better fuel efficiency
• Deeper engine resonance
• Consistent performance
• Joy in a performance upgrade

Corvette Compatibility

• C6 Corvette LS2 (Base): 2005, 2006, 2007
• Fits all 6.0L LS2-equipped C6 models, including Coupe and Convertible
• Not legal for sale in California due to CARB rules

What Corvette Owners Say

“The K&N 57-3052 brought my LS2 to life—throttle’s electric!” - Mike, C6 Owner

Discover more performance upgrades in our C6 Corvette Intake Collection.

Trusted by Corvette owners nationwide—delivered fast and secure.

C6 Corvette 57-3052 K&N Intake

57-3052 K&N Cold Air Intake - C6 Corvette LS2. Improve the air flow and throttle response on your 2005 C6 Corvette with a Cold Air Intake from K&N. Engineered specifically for the C6 Corvette Engine, the K&N C6 Corvette Intake replace the factory air box and reduces air restriction. The specially designed polyethylene air intake tube increases the air speed and straightens it out, resulting in an additional 12 horsepower and improved fuel economy. The K&N Cold Air Intake system accommodates the factory MAF and Crank Case Vent Hose. Install with basic hand tools and does not require any permanent modification to your car. Increase the power and performance of your C6 Corvette with a Cold Air Intake from K&N.

Free Shipping

Fitment: C6 Corvette (2005)

Product Note: Will NOT fit 2006 or 2007

Product Note: Not legal for Highway use in States adopting California emissions regulations. Not legal for sale in California.

C6 Corvette K&N 33-2305 Air Filter

K&N Replacement Air Filter - C6 Corvette. Designed and Engineered specifically for the C6 Corvette this K&N Air Filter will improve air flow, boost horsepower and rate of acceleration. Washable and re-usable, this C6 Corvette K&N Air Filter is backed by their Million Mile Warranty. 33-2305

Fitment: C6 Corvette (2005 - 2007)

K&N E-0782 High Flow Replacement Filter (2005-2013)

Revitalize your C6 Corvette air filter with the K&N E-0782, delivering up to 50% improved airflow for a spirited engine. This top-tier drop-in filter upgrades the original unit, breathing new life into your Base, Grand Sport, or Z06 with enhanced air intake, needing no alterations. Ideal for drivers hungry for performance gains, it nestles perfectly into the stock housing, forged with K&N’s acclaimed toughness to heighten your driving excitement. Its deep-pleated structure maximizes air capture, unleashing a surge of power that invigorates every ride, captivating owners who seek a lively, responsive drive.

Constructed with a premium cotton weave, the E-0782 optimizes air entry, proven to outshine factory filters across all RPMs, from idle to peak performance. Its washable design captures over 98% of contaminants, offering durability with easy care—rinse, dry, and re-oil—celebrated by owners for steady power on highways or tracks. The filter’s sturdy build safeguards your engine while unlocking hidden potential, providing a cost-effective upgrade that thrives in harsh conditions, appealing to enthusiasts who value endurance and performance.

Installation is effortless, slipping in within minutes without tools, and backed by K&N’s million-mile warranty for enduring reliability. Corvette fans praise the sharper acceleration, smoother engine feel, and improved responsiveness, perfect for 2005-2013 C6 models. The package includes straightforward instructions, providing a reusable option that surpasses disposable filters, enhancing your V8’s power without emissions concerns, making it a smart choice for dedicated drivers.

Why Choose K&N E-0782?

• Enhances airflow by up to 50%
• Unleashes engine potential
• No modifications needed
• Washable and reusable filter
• Over 98% filtration efficiency
• Direct factory fit
• Tool-free drop-in setup
• Million-mile warranty

What to Expect

• Crisper engine response
• Noticeable performance lift
• Improved fuel economy
• Smoother engine operation
• Long-term durability
• Pride in a premium filter

Corvette Compatibility

• C6 Corvette Base, Grand Sport, Z06: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
• Fits all LS2, LS3, LS7-equipped C6 models, including Coupe and Convertible

What Corvette Owners Say

“The K&N E-0782 gave my Z06 a new edge—engine feels alive!” - Sarah, C6 Owner

Discover more performance upgrades in our C6 Corvette Intake Collection.

Serving Corvette enthusiasts across the US—shipped quickly and safely.

Halltech Venom II Cold Air Induction System (2005-2007)

Unleash your C6 Corvette’s potential with the C6 Corvette intake from the Halltech Venom II series, crafted for 2005-2007 models with the LS2 engine. This cold air intake delivers up to 15 RWHP gains, transforming your driving experience.

Designed by Halltech in Ixonia, Wisconsin, since 1999, the Venom II features a rotomolded design with a massive K&N filter, flowing over 1250 CFM for superior airflow. Dyno-tested on the Katech Superflow dyno, it adds 12 lbs-ft of torque, ensuring robust performance for street or track.

The system includes a Beehive heat shield to isolate the filter from engine heat, capturing cold air with optional cutouts for enhanced induction. C6 owners appreciate the smoother throttle response and bolder exhaust tone, making every rev exhilarating. This bolt-on upgrade uses the stock MAF sensor and wiring, requiring no tuning, preserving your warranty.

Why Choose Halltech Venom II Cold Air Induction System?

• Adds up to 15 RWHP and 12 lbs-ft torque
• High-flow K&N filter exceeds 1250 CFM
• Rotomolded design optimizes air velocity
• Beehive heat shield enhances cold air intake
• Positive stop flange ensures smoother flow
• Bolt-on installation, no tuning needed
• Dyno-tested for proven performance gains
• Made in the USA with quality materials

What to Expect

• Smoother throttle response for spirited drives
• Bolder exhaust tone with every throttle
• Enhanced power on street or track
• Reliable airflow with heat isolation
• Simple installation in under an hour
• Dynamic performance for your C6 Corvette

Corvette Compatibility

• C6 Corvette LS2: 2005, 2006, 2007
• Fits all LS2-equipped C6 models, including Coupe and Convertible
• Not CARB compliant; not for sale or use in California

What Corvette Owners Say

“The Venom II on my 2006 C6 LS2 sounds incredible—power boost is real!” – C6 Owner, CorvetteForum

Discover more performance upgrades in our C6 Corvette Intake Collection.

Speedy, secure shipping for Corvette enthusiasts nationwide.

Halltech Killer Bee MF108 Cold Air Induction System (2006-2013)

Power up your C6 Corvette with the C6 Corvette intake from the Halltech Killer Bee MF108 series, designed for 2006-2013 Base LS3, Grand Sport, and Z06 models with LS3 or LS7 engines. This ram air intake delivers up to 20 RWHP gains, elevating performance.

Built by Halltech in Ixonia, Wisconsin, since 1999, the Killer Bee MF108 features a rotomolded polyethylene plastic design with a 108mm MAF entrance/exit, paired with a high-flow K&N filter for superior airflow. Dyno-tested for durability, it set a world record at 9.97 seconds at 137.72 mph on a Z06, proving its track-ready power.

The system includes a velocity stack for laminar flow and a Beehive heat shield to isolate engine heat, capturing cold air for optimal performance. C6 owners enjoy a deeper exhaust growl and enhanced throttle response, making every drive exhilarating. This upgrade requires MAF recalibration for tuners but improves idle with its forward MAF design.

Why Choose Halltech Killer Bee MF108 Cold Air Induction System?

• Gains up to 20 RWHP for track-ready power
• High-flow K&N filter enhances air volume
• Rotomolded polyethylene ensures lasting durability
• Velocity stack promotes efficient airflow
• Beehive heat shield optimizes cold air intake
• MAF-forward design improves idle manners
• Dyno-tested for proven performance excellence
• Made in the USA with premium materials

What to Expect

• Deeper exhaust growl with every throttle
• Enhanced throttle response for spirited drives
• Improved power on street or track
• Reliable airflow with heat isolation
• Installation in under two hours
• Dynamic performance for your C6 Corvette

Corvette Compatibility

• C6 Corvette Base LS3: 2008, 2009, 2010, 2011, 2012, 2013
• C6 Corvette Grand Sport: 2010, 2011, 2012, 2013
• C6 Corvette Z06: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
• Fits all LS3/LS7-equipped C6 models, including Coupe and Convertible
• Not CARB compliant; not for sale or use in California

What Corvette Owners Say

“The Killer Bee MF108 on my 2011 C6 Z06 is a game-changer—pure power!” – C6 Owner, CorvetteForum

Discover more performance upgrades in our C6 Corvette Intake Collection.

Corvette parts shipped nationwide—fast delivery you can trust.

Halltech Super Bee MF103 Cold Air Induction System (2006-2013)

Enhance your C6 Corvette’s performance with the C6 Corvette intake from the Halltech Super Bee MF103 series, designed for 2006-2013 Base LS3, Grand Sport, and Z06 models with LS3 or LS7 engines. This ram air intake adds up to 17 RWHP gains, boosting your drive.

Manufactured by Halltech in Ixonia, Wisconsin, since 1999, the Super Bee MF103 features a rotomolded polyethylene plastic design with a 102.5mm MAF entrance/exit, paired with a high-flow K&N filter for exceptional airflow. Dyno-tested by Katech, it delivers a proven 17 HP gain on a 606 HP Street Attack motor, showcasing track-ready performance.

The system includes a velocity stack for smooth flow and a Beehive heat shield to block engine heat, ensuring cold air intake with optional shroud cutouts for full ram air effect. C6 owners report a throatier exhaust sound and improved throttle response, making drives more dynamic. This bolt-on upgrade requires no tuning, maintaining your warranty with better-than-stock idle manners.

Why Choose Halltech Super Bee MF103 Cold Air Induction System?

• Adds up to 17 RWHP for proven power
• High-flow K&N filter enhances air capacity
• Rotomolded polyethylene ensures rugged durability
• Velocity stack optimizes airflow efficiency
• Beehive heat shield captures cold air
• No tuning needed, preserves warranty
• Dyno-tested for consistent performance gains
• Made in the USA with premium materials

What to Expect

• Throatier exhaust sound with every rev
• Improved throttle response for lively drives
• Enhanced power on street or track
• Reliable airflow with heat protection
• Easy installation in about an hour
• Dynamic performance for your C6 Corvette

Corvette Compatibility

• C6 Corvette Base LS3: 2008, 2009, 2010, 2011, 2012, 2013
• C6 Corvette Grand Sport: 2010, 2011, 2012, 2013
• C6 Corvette Z06: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
• Fits all LS3/LS7-equipped C6 models, including Coupe and Convertible
• Not CARB compliant; not for sale or use in California

What Corvette Owners Say

“The Super Bee MF103 on my 2012 C6 Z06 unleashed serious power—love the sound!” – C6 Owner, CorvetteForum

Discover more performance upgrades in our C6 Corvette Intake Collection.

From coast to coast—Corvette shipping done right.

C6 Corvette Green Performance Filter

C6 Corvette Green Filter 7087. If you want the same filter that is used at race tracks across the world for your C6 Corvette LS3/LS7, then you have come to the right place. Green Performance Air Filters are an excellent upgrade for those who want more power and performance but don't want to change out their entire Intake System. Each unit is constructed with a deep pleated layers that increase the surface area by more than 20%, increasing air flow and filtration. A hand molded flexible base creates air tight seals with no leakage and the custom made tabs insure a correct fit. The secret is in their Proprietary Lubricant that creates an ionic bond with the stainless steel mesh. The positive charge attracts negative charged dust partials and causes them to cling to the mesh, leaving the surface clear for maximum performance. Installation is a snap and it can be washed, re-charged and used for years to come. P/N 7087

Fitment: C6 Corvette Base, Grand Sport (2008 - 2013) and Z06 (2006 - 2013)

Product Note: Will NOT fit 2005 - 2007 LS2 Corvettes

C6 Corvette Green Performance Filter

C6 Corvette Green Filter 2424

Open Box - NEW - 1 Unit

REQUIRES 2 Units

Fitment: C6 Corvette Base Coupe and Convertible (2005 - 2007) 

Product Note: Will NOT fit 2008 - 2013 LS3 Corvettes

C6 Corvette Green Performance Filter

C6 Corvette Green Filter 7087. If you want the same filter that is used at race tracks across the world for your C6 Corvette LS2, then you have come to the right place. Green Performance Air Filters are an excellent upgrade for those who want more power and performance but don't want to change out their entire Intake System. Each unit is constructed with a deep pleated layers that increase the surface area by more than 20%, increasing air flow and filtration. A hand molded flexible base creates air tight seals with no leakage and the custom made tabs insure a correct fit. The secret is in their Proprietary Lubricant that creates an ionic bond with the stainless steel mesh. The positive charge attracts negative charged dust partials and causes them to cling to the mesh, leaving the surface clear for maximum performance. Installation is a snap and it can be washed, re-charged and used for years to come. P/N 2424

Fitment: C6 Corvette Base Coupe and Convertible (2005 - 2007) 

Product Note: Will NOT fit 2008 - 2013 LS3 Corvettes

C6 Corvette Z06 Corsa Cold Air Intake 44108-1

Corsa C6 Corvette Z06 Intake. Let your C6 Corvette Z06 a breath of fresh air with the Corsa Carbon Fiber Intake System. Manufactured with a High Quality Carbon Fiber Air Bridge, you can expect up to 15 additional Horsepower and an average intake 10 degrees lower than the OEM system. Red Cloth Filter provides superior particle filtration. Designed and engineered specifically for the C6 Corvette Z06.

Fitment: C6 Corvette Z06 (2006 - 2013)

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C6 Corvette Corsa Intake 44108-1

Corsa C6 Corvette LS3 Intake. Let your C6 Corvette 6.2L LS3  have a huge breath of fresh air with the Corsa Carbon Fiber Intake System. Manufactured with a High Quality Carbon Fiber Air Bridge, you can expect up to 21 additional Horsepower and an average intake 10 degrees lower than the OEM system. Red Cloth Filter provides superior particle filtration. Designed and engineered specifically for the C6 Corvette LS3 with a 6.2L Engine.

Fitment: C6 Corvette LS3 (2008 - 2013)

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

BMC C6 Corvette Air Filter

C6 Corvette BMC Air Filter - FB561/08 is a great choice that will allow your engine to take in a healthy amount of air while filtering out the smallest of particles.  The result is a greater air flow and better engine performance for your C6 Corvette.  BMC Air Filters are one of the worldwide leaders in the production of air filters in the automotive sector, both road and racing. The company operates in both the Aftermarket, thanks to a vast range of replacement air filters, and in design and development of the entire filtration systems (air-boxes) for the major global carmakers.

Made of a multi-layered cotton fabric soaked in low-viscosity oil, BMC Corvette Air Filters are inserted between two aluminum mesh frames. The aluminum mesh is coated with epoxy resin in order to protect it against oxidation caused by fuel vapors and the humidity present in the air. Cotton encourages the passage of a large air flow and is able to stop all impurities from 7 micron on up. Currently, this concept is the best solution for both a more effective filtration and for higher performance.

Replacing your OEM air filter on your C6 Corvette is one of the easiest modifications you can make to improve your engine performance giving you power to go with optimum performance.  Fuel savings alone are worth the purchase but combined with financial  savings (BMC filters can be washed and regenerated for the entire service life of the vehicle) it is an easy choice. C6 Corvette BCM Air Filter are regenerable, high-yield filters that make it possible to improve the intake air flow rate compared to traditional paper filters, with clear benefits in terms of the quality of the engine combustion.

BCM = Better air flow means better performance with an increase of power from your V8 Corvette engine.

Fitment: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette, Grand Sport, Z06 and ZR1

C6 Corvette Throttle Body

BBK C6 Corvette Throttle Body - LS3 - 95mm. Improve the airflow and throttle response on your C6 Corvette 6.2L LS3 with a BBK Throttle Body. This Throttle Body is manufactured with cast aluminum and includes new gaskets. Designed and engineered specifically for the C6 Corvette LS3. PN 1789. 50 State Legal CARB #D-245-17

Fitment: C6 Corvette LS3 (2008 - 2013)

Product Note: May Require a Custom Tune 

C6 Corvette LS3 Throttle Body

BBK C6 Corvette Throttle Body - LS3 - 102mm. Improve the airflow and throttle response on your C6 Corvette 6.2L LS3 with a BBK Throttle Body. This Throttle Body is manufactured with cast aluminum and includes new gaskets. Designed and engineered specifically for the C6 Corvette LS3. Includes 1/4" Adaptor Plate. PN 1790. 50 State Legal CARB #D-245-17

Fitment: C6 Corvette LS3 (2008 - 2013)

Product Note: May Require a Custom Tune 

C6 Corvette Cold Air Intake – Airaid Synthetic Filter (2006–2013 Z06)

Upgrade your 2006–2013 C6 Corvette Z06 with the Airaid Performance Cold Air Intake System, featuring a synthetic filter for improved airflow, better throttle response, and increased horsepower. This system is designed for drivers who want the performance benefits of a cold air intake without the hassle of oiling the filter.

The Airaid Performance Intake, part number 255-216, includes a synthetic filter that is both washable and reusable. Unlike traditional oiled filters, the synthetic filter offers superior filtration with minimal maintenance, making it a great choice for those who want high performance with less upkeep.

The system’s high-flow intake tube is crafted for smooth, uninterrupted airflow to the LS7 engine. The tube is designed to increase airflow, reduce air restriction, and enhance the induction sound of your Z06.

Installation is simple and straightforward, with no cutting or modifications required. The intake mounts directly to factory mounting points, making it a true bolt-on upgrade. This system provides noticeable increases in throttle response and overall engine performance, making it a must-have for enthusiasts looking to get more out of their Z06.

Whether you're cruising down the highway or pushing the limits on the track, the Airaid Performance Intake System gives your C6 Z06 the power and sound it deserves.

Why Choose Airaid Performance Intake Synthetic Filter?

• Synthetic filter – Washable, reusable, no oil required
• Bolt-on installation – No tuning or modifications required
• High-flow intake tube – Smooth airflow to the LS7 engine
• Improved throttle response – Increases mid-range torque and power

Corvette Compatibility

• C6 Corvette Z06 – 2006, 2007, 2008, 2009, 2010, 2011, 2012, and 2013
• Fits all LS7-equipped Z06 models

What Corvette Owners Say:

"Immediate difference in throttle response and the sound is incredible! Best investment for my Z06." – Mike, CA

Ships fast to Corvette enthusiasts across the U.S.

Explore our full C6 Corvette Intake Systems collection.

C6 Corvette Cold Air Intake – Airaid Synthetic Filter (2006–2007 LS2)

Enhance the performance of your 2006–2007 C6 Corvette LS2 with the Airaid Performance Cold Air Intake System. This system is designed to increase airflow to the 6.0L LS2 engine, delivering noticeable gains in horsepower and throttle response. The synthetic filter offers superior filtration while requiring no oiling—making it easy to maintain and perfect for everyday use.

The Airaid Performance Intake, part number 255-230, uses a high-flow synthetic filter that’s washable and reusable, offering excellent filtration performance with no need for oiling. This filter ensures your engine gets maximum airflow while protecting it from harmful debris.

The system’s rotomolded intake tube ensures smooth airflow and allows for more efficient air delivery to the LS2 engine, improving throttle response and mid-range torque. The design keeps your intake system cool by reducing heat soak, which is essential for maintaining consistent performance.

Installation is simple and straightforward, with no tuning required. The system mounts using stock mounting locations, providing a bolt-on upgrade with minimal effort.

Why Choose Airaid Performance Intake Synthetic Filter?

• Synthetic filter – Washable, reusable, and no oil required
• Bolt-on installation – Easy installation with no modifications
• High-flow intake tube – Smooth, efficient air delivery to the LS2 engine
• Improved performance – Enhanced acceleration and mid-range torque

Corvette Compatibility

• C6 Corvette LS2 – 2006 and 2007
• Fits all LS2-equipped C6 Coupe and Convertible models

What Corvette Owners Say:

"Not only does the engine sound better, but I felt an instant improvement in throttle response and performance." – Mark, TX

Ships fast to Corvette enthusiasts across the U.S.

Explore our full C6 Corvette Intake Systems collection.

C6 Corvette Cold Air Intake – Airaid Synthetic Filter (2005–2007 LS2)

Enhance the performance of your 2005–2007 C6 Corvette LS2 with the Airaid Performance Cold Air Intake System. This system is designed to increase airflow to the 6.0L LS2 engine, delivering noticeable gains in horsepower and throttle response. The synthetic filter offers superior filtration while requiring no oiling—making it easy to maintain and perfect for everyday use.

The Airaid Performance Intake, part number 255-218, uses a high-flow synthetic filter that’s washable and reusable, offering excellent filtration performance with no need for oiling. This filter ensures your engine gets maximum airflow while protecting it from harmful debris.

The system’s rotomolded intake tube ensures smooth airflow and allows for more efficient air delivery to the LS2 engine, improving throttle response and mid-range torque. The design keeps your intake system cool by reducing heat soak, which is essential for maintaining consistent performance.

Installation is simple and straightforward, with no tuning required. The system mounts using stock mounting locations, providing a bolt-on upgrade with minimal effort.

Why Choose Airaid Performance Intake Synthetic Filter?

• Synthetic filter – Washable, reusable, and no oil required
• Bolt-on installation – Easy installation with no modifications
• High-flow intake tube – Smooth, efficient air delivery to the LS2 engine
• Improved performance – Enhanced acceleration and mid-range torque

Corvette Compatibility

• C6 Corvette LS2 – 2005, 2006 and 2007
• Fits all LS2-equipped C6 Coupe and Convertible models

What Corvette Owners Say:

"Not only does the engine sound better, but I felt an instant improvement in throttle response and performance." – Mark, TX

Ships fast to Corvette enthusiasts across the U.S.

Explore our full C6 Corvette Intake Systems collection.

C6 Corvette Cold Air Intake – Airaid Oiled Filter (2009–2013 LS3)

Improve your 2009–2013 C6 Corvette LS3's performance with the Airaid Performance Cold Air Intake System, featuring an oiled filter for superior filtration, enhanced airflow, and increased horsepower. This system delivers noticeable improvements in throttle response, mid-range torque, and overall engine performance.

The Airaid Performance Intake, part number 254-230, uses a high-flow oiled filter that is washable and reusable, designed to maximize airflow while capturing dirt and debris. The oiled filter ensures optimal filtration for maximum engine protection and performance.

The rotomolded intake tube is engineered for smooth, unrestricted airflow, delivering cooler, denser air into your LS3 engine. This helps to improve combustion efficiency, giving you more power and better throttle response. The system also improves intake tone for a deeper, more aggressive sound.

This intake system is a bolt-on, no-modification upgrade. Installation is easy and requires no cutting or tuning, allowing for a quick and seamless upgrade that enhances performance immediately.

Whether you’re a daily driver or track enthusiast, the Airaid Performance Intake System provides the perfect balance of improved performance and simple maintenance.

Why Choose Airaid Performance Intake Oiled Filter?

• Oiled filter – Provides excellent filtration and high airflow
• Bolt-on installation – No cutting or tuning required
• Rotomolded intake tube – Designed for smooth, efficient airflow
• Improved throttle response – Enhances acceleration and mid-range power

Corvette Compatibility

• C6 Corvette LS3 – 2009, 2010, 2011, 2012 and 2013
• Fits all LS3-equipped C6 Coupe and Convertible models

What Corvette Owners Say:

"Easy install, and the throttle feels so much more responsive now. I can definitely feel the difference in power!" – Eric, MI

Ships fast to Corvette enthusiasts across the U.S.

Explore our full C6 Corvette Intake Systems collection.

C6 Corvette Cold Air Intake – Airaid Oiled Filter (2005–2007 LS2)

Enhance the performance and drivability of your 2005–2007 C6 Corvette LS2 with the Airaid Performance Cold Air Intake System, featuring an oiled filter that improves airflow, increases horsepower, and enhances throttle response. This intake system is designed specifically for the 6.0L LS2 engine and provides a performance upgrade without requiring any modifications to your car’s ECU.

The Airaid Performance Intake, part number 254-218, comes equipped with a high-flow oiled filter that is washable and reusable. This oiled filter provides exceptional filtration, allowing for maximum airflow while keeping harmful debris out of your engine. Unlike other filters, it doesn’t require oiling after each cleaning, providing easier maintenance for regular use.

The rotomolded intake tube ensures smooth and efficient airflow into the LS2 engine, improving power delivery and throttle response. The system also improves the engine’s sound under acceleration, giving your Corvette a more aggressive intake note.

The bolt-on installation requires no cutting or tuning, making it a seamless and effective upgrade. The system uses factory mounting points and comes with all the necessary hardware for easy installation.

Whether you're looking to improve daily performance, increase power for track days, or enhance your driving experience, the Airaid Performance Intake System is an ideal solution.

Why Choose Airaid Performance Intake Oiled Filter?

• Oiled filter – Maximizes airflow while providing superior filtration
• Bolt-on installation – Quick and easy installation with no tuning needed
• Rotomolded intake tube – Designed to optimize airflow and increase power
• Improved throttle response – Adds mid-range torque and enhances acceleration

Corvette Compatibility

• C6 Corvette LS2 – 2005, 2006 and 2007
• Fits all LS2-equipped C6 Coupe and Convertible models

What Corvette Owners Say:

"Instantly noticeable difference in throttle response and power. Plus, I love the sound at full throttle!" – Dave, TX

Ships fast to Corvette enthusiasts across the U.S.

Explore our full C6 Corvette Intake Systems collection.

C6 Corvette Cold Air Intake – Airaid Oiled Red (2006–2013 Z06)

Increase the performance and engine tone of your 2006–2013 C6 Corvette Z06 with the Airaid Performance Cold Air Intake System, featuring an oiled filter. This system improves airflow to your LS7 engine, delivering better throttle response, increased horsepower, and a more aggressive intake sound.

The Airaid Performance Intake, part number 254-126, includes a high-flow oiled filter that is washable and reusable. The oiled filter ensures superior filtration and maximum airflow, allowing your LS7 engine to breathe more easily and perform better under load.

The rotomolded intake tube is designed to reduce air turbulence and optimize the flow of air into the engine, resulting in better power delivery and more responsive acceleration. The system is engineered to provide a noticeable increase in performance without the need for a tune, making it a simple bolt-on upgrade.

The Airaid Performance Intake also enhances the engine’s sound, giving your Corvette a deeper, more aggressive intake note without adding excessive noise. Whether you’re accelerating on the street or taking your Z06 to the track, this intake system provides consistent, reliable performance.

Installation is quick and easy, with all the necessary hardware included. Simply mount the intake tube to the factory locations and enjoy improved power, throttle response, and sound.

Why Choose Airaid Performance Intake Oiled Red Filter?

• Oiled filter – Maximizes airflow and ensures superior filtration
• Bolt-on installation – No cutting or tuning required
• Roto-molded intake tube – Designed for smooth, efficient airflow
• Improved throttle response – Enhances acceleration and mid-range torque

Corvette Compatibility

• C6 Corvette Z06 – 2006, 2007, 2008, 2009, 2010, 2011, 2012, and 2013
• Fits all LS7-equipped Z06 models

What Corvette Owners Say:

"Love the sound and performance boost. The installation was simple, and the difference in throttle response is noticeable." – Alex, NY

Ships fast to Corvette enthusiasts across the U.S.

Explore our full C6 Corvette Intake Systems collection.

aFe Magnum FORCE Pro DRY S Intake – C6 Corvette LS3

Unlock better throttle response and airflow with the aFe Magnum FORCE Pro DRY S Cold Air Intake for your 2008–2013 C6 Corvette LS3. Designed to increase performance while offering a low-maintenance experience, this oil-free system is perfect for daily drivers and weekend warriors alike.

The aFe Magnum FORCE Intake, part number 51-12732, includes a washable, reusable Pro DRY S filter that delivers excellent filtration without requiring oil. Ideal for Corvette owners who want performance gains with simple upkeep, this system offers improved mid-range power and a more responsive feel under throttle.

The roto-molded intake tube is engineered to maintain smooth airflow while preserving factory MAF sensor placement. The sealed airbox design helps reduce heat soak by isolating incoming air from engine bay temperatures, keeping your LS3 breathing cold and clean.

This system installs in under an hour using factory mounting points. No tuning or cutting is required—just bolt it on and enjoy a more dynamic driving experience.

Expect sharper throttle input, a refined intake tone, and a more eager-feeling engine—without sacrificing OEM drivability or compliance.

Why Choose aFe Magnum FORCE Pro DRY S Intake?

• Pro DRY S filter – Washable, reusable, and oil-free
• Sealed airbox design – Keeps hot engine air out
• Roto-molded intake tube – Smooth airflow and sensor compatibility
• Perfect fit for LS3 – Built for 2008–2013 C6 Corvettes

Corvette Compatibility

• C6 Corvette LS3 – 2008, 2009, 2010, 2011, 2012 and 2013
• Fits all LS3-equipped C6 Coupe and Convertible models

What Corvette Owners Say:

"I didn’t want the mess of oiled filters, and this one delivers. Sound is stronger and the throttle feels quicker." – Chris, CA

Ships fast to Corvette enthusiasts across the U.S.

Explore our full C6 Corvette Intake Systems collection.

aFe Magnum FORCE Pro DRY S Intake – C6 Corvette LS2

Enhance the performance and efficiency of your 2005–2007 C6 Corvette LS2 with the aFe Magnum FORCE Pro DRY S Cold Air Intake. This system is engineered for drivers who want cleaner airflow, improved throttle response, and zero-maintenance filtering—no oil required.

The aFe Magnum FORCE Intake, part number 51-10902, features a washable and reusable Pro DRY S synthetic filter. Designed for ease of maintenance and excellent filtration, it’s ideal for daily drivers who want a reliable performance boost without the mess of oiled filters.

Its roto-molded intake tube is custom-tuned to optimize airflow into the LS2 engine while preserving factory sensor placement. This ensures smooth drivability with no tuning required.

Installation is quick and completely reversible. The system bolts into place using stock mounting locations and comes complete with all brackets, clamps, and hardware. No cutting or permanent mods needed.

This intake delivers real-world gains in mid-range torque and acceleration, along with a deeper, more responsive induction tone. If you want performance without extra hassle, the Pro DRY S is a powerful and practical upgrade.

Why Choose aFe Magnum FORCE Pro DRY S Intake?

• Pro DRY S filter – Washable, reusable, oil-free performance
• Bolt-on fitment – Installs using factory mounts
• Roto-molded intake tube – Smooth airflow and OE sensor compatibility
• Engineered for LS2 – Designed for 2005–2007 C6 Corvettes

Corvette Compatibility

• C6 Corvette LS2 – 2005, 2006 and 2007
• Fits all LS2-equipped C6 Coupe and Convertible models

What Corvette Owners Say:

"Easy install, clean filter setup, and noticeable improvement in throttle feel. Exactly what I wanted." – Logan, SC

Ships fast to Corvette enthusiasts across the U.S.

Explore our full C6 Corvette Intake Systems collection.

aFe Magnum FORCE Pro DRY S Intake – C6 Corvette Z06

Improve airflow and power delivery in your 2006–2013 C6 Corvette Z06 with the aFe Magnum FORCE Pro DRY S Cold Air Intake. Designed for LS7-equipped models, this system delivers dyno-tested performance while offering easy maintenance and a clean, oil-free filter solution.

The aFe Magnum FORCE Intake, part number 51-12732, features a Pro DRY S filter that’s washable, reusable, and does not require oil. Perfect for street use or spirited driving, it delivers strong filtration with minimal upkeep. The open-element design promotes better airflow and adds a subtle intake tone under throttle.

The system’s roto-molded intake tube is engineered to align with factory sensors and improve air velocity into the LS7. It’s a direct bolt-on upgrade that doesn’t require cutting or tuning—just install and go.

The intake housing helps reduce heat soak while maximizing space inside the engine bay. Combined with the high-flow synthetic media filter, the result is improved throttle response, better mid-range pull, and a more eager powerband.

Whether you’re chasing lap times or street performance, this intake is built to deliver clean gains with minimal effort.

Why Choose aFe Magnum FORCE Pro DRY S Intake?

• Pro DRY S filter – Oil-free, washable, and maintenance-friendly
• Bolt-on installation – No cutting or tuning required
• Roto-molded intake tube – Improves air delivery to the LS7
• Designed for Z06 – Engineered for 7.0L LS7 performance

Corvette Compatibility

• C6 Corvette Z06 – 2006, 2007, 2008, 2009, 2010, 2011, 2012 and 2013
• Fits all LS7-equipped Z06 models

What Corvette Owners Say:

"Install was simple. Throttle response improved immediately, and I like not having to deal with oiling filters anymore." – Darryl, CO

Ships fast to Corvette enthusiasts across the U.S.

Explore our full C6 Corvette Intake Systems collection.

``

aFe Magnum FORCE Pro 5R Intake – C6 Corvette LS3

Enhance airflow, throttle response, and engine tone in your 2008–2013 C6 Corvette LS3 with the aFe Magnum FORCE Pro 5R Cold Air Intake. Designed for maximum performance, this intake system delivers dyno-tested horsepower and torque gains using a high-flow oiled filter and optimized intake path.

The aFe Magnum FORCE Intake, part number 54-12732, includes a reusable 5-layer oiled Pro 5R filter that captures fine particulates while delivering maximum airflow. It's ideal for Corvette owners looking to get more power and a deeper induction sound without major modifications.

The system features a sealed rotomolded intake box and tube to isolate the filter from engine bay heat and maintain a consistent flow of cooler, denser air. This helps improve combustion efficiency and supports reliable performance whether you're street driving or tracking your car.

Installation is simple and fully reversible. The system mounts to stock locations with no cutting or tuning required, making it an easy, effective upgrade for your LS3-powered Corvette.

Expect sharper pedal feel, stronger mid-range pull, and a more aggressive sound as soon as you step on the throttle.

Why Choose aFe Magnum FORCE Pro 5R Intake?

• 5-layer oiled filter – Maximum airflow and reusable performance
• Sealed airbox design – Protects from heat soak
• Roto-molded intake tube – Smooth airflow and OE sensor compatibility
• Engineered for LS3 – Fits 2008–2013 C6 Corvette applications

Corvette Compatibility

• C6 Corvette LS3 – 2008, 2009, 2010, 2011, 2012 and 2013
• Fits all LS3-equipped C6 Coupe and Convertible models

What Corvette Owners Say:

"Super easy install. You can feel and hear the difference. The tone is deeper and it pulls stronger through the mid-range." – Nate, FL

Ships fast to Corvette enthusiasts across the U.S.

Explore our full C6 Corvette Intake Systems collection.

aFe Magnum FORCE Pro 5R Intake – C6 Corvette LS2

Unleash the hidden potential of your 2005–2007 C6 Corvette LS2 with the aFe Magnum FORCE Pro 5R Cold Air Intake. Engineered for maximum airflow and performance, this system provides dyno-proven horsepower gains and aggressive sound for drivers who want more from their V8.

The aFe Magnum FORCE Intake, part number 54-10902, uses a 5-layer oiled cotton gauze filter to provide high flow and excellent filtration. Ideal for spirited driving or weekend track use, the Pro 5R filter captures dirt while allowing unrestricted airflow for improved throttle response.

The system’s roto-molded intake tube is designed for smooth air delivery into the LS2 engine. It maintains factory sensor positions and installs using factory mounting points for a precise, no-hassle fit.

With no cutting or tuning required, this intake offers a direct bolt-on installation. It delivers noticeable improvements in acceleration, intake tone, and mid-range torque—all without sacrificing everyday drivability.

This is the most aggressive intake in aFe’s lineup for the C6 LS2, offering performance and sound in one well-designed package.

Why Choose aFe Magnum FORCE Pro 5R Intake?

• 5-layer oiled filter – Reusable and performance-focused
• Bolt-on installation – Uses factory locations, no tuning needed
• Roto-molded intake tube – Smooth, high-flow design
• Engineered for LS2 – Precision fit for 2005–2007 C6 Corvettes

Corvette Compatibility

• C6 Corvette LS2 – 2005, 2006 and 2007
• Fits all LS2-equipped C6 Coupe and Convertible models

What Corvette Owners Say:

"Fit was perfect and the sound is amazing. Car breathes better and responds faster, especially off the line." – Troy, OH

Ships fast to Corvette enthusiasts across the U.S.

Explore our full C6 Corvette Intake Systems collection.

aFe Magnum FORCE Pro 5R Intake – C6 Corvette Z06

Unleash the full potential of your 2006–2013 C6 Corvette Z06 with the aFe Magnum FORCE Pro 5R Cold Air Intake. Designed specifically for the high-revving 7.0L LS7 engine, this intake improves airflow, throttle response, and induction tone for an instantly more aggressive driving experience.

The aFe Magnum FORCE Intake, part number 54-12732, uses a large, high-flow 5-layer oiled Pro 5R filter to capture dirt while maximizing air volume. This setup is ideal for performance-oriented drivers who want more power and sound from their Z06 without tuning.

The intake’s roto-molded intake tube is dyno-tuned to ensure smooth, unrestricted airflow, while the open-element design enhances under-hood acoustics and promotes cold air draw. The system mounts directly to factory points for a fast, no-hassle installation.

You’ll notice increased low-end torque, stronger mid-range pull, and a more responsive throttle—all while enjoying the deep, clean growl of a true performance intake.

If you’re looking for a bolt-on upgrade that makes your LS7 feel more alive, the aFe Pro 5R delivers in both performance and tone.

Why Choose aFe Magnum FORCE Pro 5R Intake?

• 5-layer oiled Pro 5R filter – High flow and reusable performance
• Roto-molded intake tube – Optimized for LS7 airflow
• No tuning required – Works with factory ECU
• Designed for C6 Z06 – Perfect fit for 7.0L LS7 Corvettes

Corvette Compatibility

• C6 Corvette Z06 – 2006, 2007, 2008, 2009, 2010, 2011, 2012 and 2013
• Fits all LS7-equipped Z06 models

What Corvette Owners Say:

"Throttle feels sharper and the intake sound is killer at wide open throttle. Best upgrade I’ve done without a tune." – Sean, TX

Ships fast to Corvette enthusiasts across the U.S.

Explore our full C6 Corvette Intake Systems collection.