C8 Corvette Parts and Accessories

C8 Corvette Stingray Carbon Fiber Cold Air Intake

C8 Corvette Corsa Carbon Fiber Intake - 44003D.  The C8 was worth the wait and now it is time to add the best-in-class Cold Air Intake system from Corsa. Early reviews rave about the amazing sound and increase in throttle response. Designed for a snug fit with the classic beautiful finish expected from Carbon Fiber but also one that is very strong and lightweight and built to perform.

In the late 1950's high tensile strength carbon fibers were discovered and it did not take long before the benefits of these high-strength fibers were clear. They weighed a fraction of the weight of steel, yet contained much greater tensile strength.  In the pursuit of ultimate performance, the C8 Corvette Stingray Carbon Fiber Cold Air Intake takes advantage of this by using two dry tech high performance free flowing filters inside an enclosed case. The result is an increase in horsepower and torque with a 50,000 mile maintenance schedule.

CORSA’s drive to produce the world’s best air intake systems is evident throughout every aspect of the business. From its earlier conception through its final development, the C8 Corvette Corsa Carbon Fiber Intake system had you the end user in mind and performance at the forefront of manufacturing and quality.

Due to the snug fit required by the mid-engine changes to the Chevy Corvette C8 design, installation will require a touch of patience if you are going to give it a go on your own as it rates at the high end of difficulty. CORSA recommends that the installation of this system be performed by a qualified service center or professional installer who has the necessary equipment, tools, and experienced personnel.

C8 Corvette Corsa Carbon Fiber Intake System remain the standard by which all other air intake systems are measured.

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray Coupe and Hard top Convertible

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

Pedal Commander PC49 C8 Corvette Throttle Controller

The C8 Corvette Pedal Commander Throttle Controller PC49 will eliminate the throttle lag in your New Stingray Corvette. You can completely take control of your of your throttle input.  The gas pedal sends your computer signals and controls the cars response. The OEM factory program has a very soft or mushy feeling in the 1st third of its travel, leaving a noticeable lag in response. As the world's most advanced throttle controller, the PC49 gets rid the response delays from your drive by wire gas pedal, and gives you total control of the input. 

The Pedal Commander C8 Corvette TC unit comes with four pre-programmed modes: Eco, City, Sport and Sport+. Each one of these modes comes with an additional eight settings so that you can make it more or less responsive. Now you can manually adjust for maximum highway mileage or dial it all the way up for some track time. No matter what you choose, there is sure to be a setting for your personal driving style. Packed full of features, this unit is fully plug and play and does not require any re-calibration or tuning. The super easy installation takes about 10 minutes and can be done by anyone with basic automotive knowledge. Operation can be done via the hardwired controller or via Bluetooth via your smart phone or tablet. Installation is easily reversible and the unit leaves no trace on your ECU. The C8 Corvette Pedal Commander Throttle Controller PC49 WILL NOT Void your factory warranty 

Fitment: C8 Corvette Stingray, 2020, 2021, 2022, 2023 and 2024

C8 Corvette Spline Drive Lug Nuts

Mcgard C8 Corvette Spline Drive Lug Nuts. Why settle for regular Lug Nuts when you can combine the style and performance of Spline Drive Lug Nuts. Designed and engineered to fit in the small recesses of aftermarket wheels. 30% lighter than OEM, these also offer a closed end design, more stud engagement for more gripping power, and greater surface area than traditional socket engagement. (requires Spline Drive Installation Tool 65301) Guaranteed not to rust, peel or chip and backed by a lifetime warranty, these will be the last Corvette Spline Drive Lug Nuts you ever buy.

Features:

• Chrome or Black
• M14 x 1.5 Thread Size
• 22mm or 1" Hex Head Size
• 1.648 Inch in Overall Length
• Cone Nut Seat
• Sold as a set of (4)

Product Note: Requires Spline Drive Installation Tool

Fitment: C8 Corvette Stingray 2020, 2021, 2022, 2023, 2024

C8 Corvette Chrome Lug Nut Wheel Locks

McGard 24215 Corvette Wheel Locks - Chrome. Protect the investment that you have in your wheels and tires with a set of McGard Corvette Wheel Locks. Each Lug Nut Wheel Lock is Triple Chrome Plated by their experienced staff using their own in-house process, guaranteed to keep shining as long as you own them. McGard Corvette Wheel Locks are the class of the field. They have been protecting the world's finest wheels and tires since 1964. These will be a direct OEM replacement for one of your OEM Lug Nuts on each wheel. Backed by a lifetime warranty, these will be the last Corvette Lug Nut Wheel Locks you ever buy.

Features:

• Chrome
• M14 x 1.5 Thread Size
• 21mm and 22mm Dual Hex Head Size
• 1.639 Inch in Overall Length
• Cone Nut Seat
• Sold as a set of (4)

Fitment:

C8 Stingray, 2020, 2021, 2022, 2023, 2024

C8 Corvette Black Lug Nut Wheel Locks

McGard 24216 Corvette Wheel Locks - Black. Protect the investment that you have in your wheels and tires with a set of McGard Corvette Wheel Locks. Each Lug Nut Wheel Lock is Triple Chrome Plated with Black PVD by their experienced staff using their own in-house process, guaranteed to keep shining as long as you own them. McGard Corvette Wheel Locks are the class of the field. They have been protecting the world's finest wheels and tires since 1964. These will be a direct OEM replacement for one of your OEM Lug Nuts on each wheel. Backed by a lifetime warranty, these will be the last Corvette Lug Nut Wheel Locks you ever buy.

Features:

• Chrome with Black PVD
• M14 x 1.5 Thread Size
• 21mm and 22mm Dual Hex Head Size
• 1.639 Inch in Overall Length
• Cone Nut Seat
• Sold as a set of (4)

Fitment:

C8 Stingray, 2020, 2021, 2022, 2023, 2024

C8 Corvette Chrome Lug Nuts with Bulge Cone Seat

McGard C8 Corvette Lug Nuts - Chrome Bulge Cone Seat - 64073. Perfect to replace the dull, beat up lug nuts on your C7 Corvette Stingray, Grand Sport, Z06 and ZR1. Each set is triple Nickle Chrome Plated by their experienced staff using their own in-house plating, guaranteeing that your set will keep shining for years to come. Infact, they are so sure about the quality of their products, they are backed by a written lifetime warranty.

Features:

• Triple Plated Chrome
• M14 x 1.5 Thread Size
• 22mm Hex Head Size
• 1.635 Inch in Overall Length
• Bulge Cone Nut Seat
• Sold as a set of (4)

C8 Corvette Chrome Lug Nuts lead a rough life. They are exposed to harsh weather conditions, corrosive wheel cleaners, impact guns and wrenches. All McGard C8 Corvette Lug Nuts are manufactured with restricted chemistry steel, through-hardened and Triple Chrome Plated so you can be sure that they will look brand new for years to come. Guaranteed not to rust, peel or chip, these McGard C8 Corvette Lug Nuts are designed for the real world, meeting or exceeding all OEM Safety Requirements, ensuring that your wheels are not being held on by inferior soft metal lugs. Safe for use with OEM Rims or Steel and Aluminum Aftermarket Wheels. When only the Best C8 Corvette Chrome Lug Nuts will do, then it has to be McGard

Fitment: C8 Stingray - 2020, 2021, 2022, 2023, 2024

C8 Corvette Chrome Lug Nuts

McGard C8 Corvette Lug Nuts - Chrome Cone Seat - 64069. Perfect to replace the dull, beat up lug nuts on your C8 Corvette. Each set is triple Nickle Chrome Plated by their experienced staff using their own in-house plating, guaranteeing that your set will keep shining for years to come. Infact, they are so sure about the quality of their products, they are backed by a written lifetime warranty.

Features:

• Triple Plated Chrome
• M14 x 1.5 Thread Size
• 22mm Hex Head Size
• 1.635 Inch in Overall Length
• Cone Nut Seat
• Sold as a set of (4)

C8 Corvette Chrome Lug Nuts lead a rough life. They are exposed to harsh weather conditions, corrosive wheel cleaners, impact guns and wrenches. All McGard C8 Corvette Lug Nuts are manufactured with restricted chemistry steel, through-hardened and Triple Chrome Plated so you can be sure that they will look brand new for years to come. Guaranteed not to rust, peel or chip, these McGard C8 Corvette Lug Nuts are designed for the real world, meeting or exceeding all OEM Safety Requirements, ensuring that your wheels are not being held on by inferior soft metal lugs. Safe for use with OEM Rims or Steel and Aluminum Aftermarket Wheels. When only the Best C8 Corvette Chrome Lug Nuts will do, then it has to be McGard

Fitment: C8 Stingray, 2020, 2021, 2022, 2023, 2024

C8 Corvette Black Lug Nuts with Bulge Cone Seat 64074

McGard C8 Corvette Lug Nuts - Black Bulge Cone Seat - 64074. Perfect to replace the dull, beat up lug nuts on your C8 Corvette Stingray. Each set is triple Nickle Chrome Plated with Black PVD by their experienced staff using their own in-house plating, guaranteeing that your set will keep shining for years to come. Infact, they are so sure about the quality of their products, they are backed by a written lifetime warranty.

Features:

• Chrome with Black PVD
• M14 x 1.5 Thread Size
• 22mm Hex Head Size
• 1.635 Inch in Overall Length
• Bulge Cone Nut Seat
• Sold as a set of (4)

C8 Corvette Black Lug Nuts lead a rough life. They are exposed to harsh weather conditions, corrosive wheel cleaners, impact guns and wrenches. All McGard C8 Corvette Lug Nuts are manufactured with restricted chemistry steel, through-hardened and Triple Chrome Plated with Black PVD so you can be sure that they will look brand new for years to come. Guaranteed not to rust, peel or chip, these McGard C8 Corvette Lug Nuts are designed for the real world, meeting or exceeding all OEM Safety Requirements, ensuring that your wheels are not being held on by inferior soft metal lugs. Safe for use with OEM Rims or Steel and Aluminum Aftermarket Wheels. When only the Best C8 Corvette Black Lug Nuts will do, then it has to be McGard

Fitment: C8 Stingray - 2020, 2021, 2022, 2023, 2024

C8 Corvette Black Lug Nuts 64072

McGard C8 Corvette Lug Nuts - Black Cone Seat - 64072. Perfect to replace the dull, beat up lug nuts on your C8 Corvette Stingray. Each set is triple Chrome Plated and then finished with Black PVD by their experienced staff using their own in-house plating, guaranteeing that your set will keep shining for years to come. Infact, they are so sure about the quality of their products, they are backed by a written lifetime warranty.

Features:

• Chrome with Black PVD
• M14 x 1.5 Thread Size
• 22mm Hex Head Size
• 1.635 Inch in Overall Length
• Cone Nut Seat
• Sold as a set of (4)

C8 Corvette Black Lug Nuts lead a rough life. They are exposed to harsh weather conditions, corrosive wheel cleaners, impact guns and wrenches. All McGard C8 Corvette Lug Nuts are manufactured with restricted chemistry steel, through-hardened and Triple Chrome Plated with Black PVD so you can be sure that they will look brand new for years to come. Guaranteed not to rust, peel or chip, these McGard C8 Corvette Lug Nuts are designed for the real world, meeting or exceeding all OEM Safety Requirements, ensuring that your wheels are not being held on by inferior soft metal lugs. Safe for use with OEM Rims or Steel and Aluminum Aftermarket Wheels. When only the Best C8 Corvette Black Lug Nuts will do, then it has to be McGard

Fitment: C8 Stingray, 2020, 2021, 2022, 2023, 2024

C8 Corvette Seat Cover Towel

C8 Corvette Seat Armour Car Towels are perfect for the owner who is not afraid to show off their ride when making that quick trip from the gym, yoga, beach or even if you want to take your pet for a ride. Protecting your seat from dirt or sand with simple ease as the Seat Armour Towel slips over your headrest and the logo face sits over the front of your seat showing off stylish protection with ease.

The C8 Corvette Seat Cover Towel is designed to slip on and off with ease, this heavy weight terry velour Corvette seat towel protects your leather from damage due to UV rays, sweat and day-to-day wear. Along with seat protection, this Corvette seat towel looks great. Each towel has the Corvette logo proudly displayed. The logo is fiber reactive dyed so no worries about fading or embroidery to scratch your leather seats

Seat Armour is the name of the game when it comes to a simple solution and brings instant protection with this C8 Corvette Seat Cover Towel. Are you thinking of taking a grand child for ice cream, want to go for a ride but you are afraid of a spill? You only live once so pick up a couple different colors and have them on stand by and have them available for spur of the moment trips

 C8 Corvette Seat Armour Car Towels are machine washable and Sold as (1) Towel per order. You can’t go wrong with the hassle-free, affordable and a comfortable seat protection solution. These covers come in 4 different color options, so double up today.

Fitment: C8 Corvette Stingray 2020, 2021, 2022, 2023, 2024

Racemesh Gothic Weave C8 Corvette Stingray Front Grille

C8 Corvette RaceMesh Front Grille - Gothic Weave. Long considered "Simply the Best" Grilles offered, these 4 piece full replacement Stingray Screens are everything you have come to expect from Racemesh. These Gothic Weave Grilles offer an aggressive style and are available in a variety of finishes. 

Manufactured in Marietta Georgia, Each C8 Corvette Stingray Front Grille is a direct replacement for your factory part. Each Grille is hand manufactured and custom fit into an official GM Part, so you know the fit will be perfect every time. The Frames are offered in matching Carbon Flash Metallic or Accelerate Yellow, Artic White, Black, Blade Silver, Ceramic Grey Elkhart Lake Blue, Long Beach Red, Rapid Blue, Sebring Orange, Shadow Gray Torch Red and Zeus Bronze. Select from different screen color options including: Standard Stainless Steel, Flat Black, Semi-Gloss Black, Gloss Black, Silver Leopard, Chrome and Black Chrome

Professional Installation Recommended. If you are looking for the absolute best Grilles and Screens for the C8 Corvette Stingray, then it has to be RaceMesh Grilles. 

Fitment: C8 Corvette Stingray (2020, 2021, 2022, 2023, 2024)

Product Note: Manufacturing Lead Time is Approximately 30 Days

Product Note: Bumper Removal Required for installation

Racemesh C8 Corvette Stingray Grilles

C8 Corvette RaceMesh Grilles - Weave - Full Vehicle - Replacement Frames (except Rear lower Bumper Screen and Engine Screen Frames). Long considered "Simply the Best" Grilles offered, this Full replacement Stingray Screen set is everything you have come to expect from Racemesh. These Traditional Weave Grilles offer a classic style and are available in a variety of finishes. 

Included in this Kit:

(4) Front Grilles and Replacement Frames

(2) Rear Heat Extractor Grilles and Frames

(1) Rear Diffuser Grille (use OEM Frame)

(2) Engine Bay Grilles (Use OEM Frames)

Manufactured in Marietta Georgia, Each set of RaceMesh C8 Corvette Stingray Grilles are a direct replacement for your factory part. Each Grille is hand manufactured and custom fit into an official GM Part, so you know the fit will be perfect every time. The Frames are offered in matching Carbon Flash Metallic or Accelerate Yellow, Artic White, Black, Blade Silver, Ceramic Grey Elkhart Lake Blue, Long Beach Red, Rapid Blue, Sebring Orange, Shadow Gray Torch Red and Zeus Bronze. Select from different Grille color options including: Standard Stainless Steel, Flat Black, Semi-Gloss Black, Gloss Black, Silver Leopard, Chrome and Black Chrome

Professional Installation Recommended. If you are looking for the absolute Best Grilles  for the C8 Corvette Stingray, then it has to be RaceMesh Grilles. 

Fitment: C8 Corvette Stingray (2020, 2021, 2022, 2023, 2024)

Product Note: Manufacturing Lead Time is Approximately 30 Days

Product Note: Includes new frames (Except Rear Lower Valance and Engine Vents)

Product Note: Installation requires removal of the front and rear bumper

Racemesh C8 Corvette Stingray Screens

C8 Corvette RaceMesh Grilles - Weave - Full Vehicle - Full Replacement Frames (except Rear lower Bumper Screen). Long considered "Simply the Best" Grilles offered, this Full replacement Stingray Screen set is everything you have come to expect from Racemesh. These Traditional Weave Grilles offer a classic style and are available in a variety of finishes. 

Included in this Kit:

(4) Front Grilles and Replacement Frames

(2) Rear Heat Extractor Grilles and Frames

(1) Rear Diffuser Grille (use OEM Frame)

(2) Engine Bay Grilles and Frames

Manufactured in Marietta Georgia, Each set of RaceMesh C8 Corvette Stingray Screens are a direct replacement for your factory part. Each Grille is hand manufactured and custom fit into an official GM Part, so you know the fit will be perfect every time. The Frames are offered in matching Carbon Flash Metallic or Accelerate Yellow, Artic White, Black, Blade Silver, Ceramic Grey Elkhart Lake Blue, Long Beach Red, Rapid Blue, Sebring Orange, Shadow Gray Torch Red and Zeus Bronze. Select from different screen color options including: Standard Stainless Steel, Flat Black, Semi-Gloss Black, Gloss Black, Silver Leopard, Chrome and Black Chrome

Professional Installation Recommended. If you are looking for the absolute Best Grilles and Screens for the C8 Corvette Stingray, then it has to be RaceMesh Grilles. 

Fitment: C8 Corvette Stingray (2020, 2021, 2022, 2023, 2024)

Product Note: Manufacturing Lead Time is Approximately 30 Days

Product Note: Includes new frames (Except Rear Lower Valance)

Product Note: Installation requires removal of the front and rear bumper

Racemesh C8 Corvette Stingray Engine Vent Screens

C8 Corvette RaceMesh Engine Bay Grilles - Weave - Full Replacements. Long considered "Simply the Best" Grilles offered, this 6 piece full replacement Stingray Screens are everything you have come to expect from Racemesh. These Traditional Weave Grilles offer a classic style and are available in a variety of finishes. 

Manufactured in Marietta Georgia, Each set of C8 Corvette Stingray Engine Vent Screens are a direct replacement for your factory part. Each Grille is hand manufactured and custom fit into an official GM Part, so you know the fit will be perfect every time. The Frames are offered in matching Carbon Flash Metallic or Accelerate Yellow, Artic White, Black, Blade Silver, Ceramic Grey Elkhart Lake Blue, Long Beach Red, Rapid Blue, Sebring Orange, Shadow Gray Torch Red and Zeus Bronze. Select from different screen color options including: Standard Stainless Steel, Flat Black, Semi-Gloss Black, Gloss Black, Silver Leopard, Chrome and Black Chrome

Professional Installation Recommended. If you are looking for the absolute Best Engine Bay Grilles and Screens for the C8 Corvette Stingray, then it has to be RaceMesh Grilles. 

Fitment: C8 Corvette Stingray (2020, 2021, 2022, 2023, 2024)

Product Note: Manufacturing Lead Time is Approximately 30 Days

Product Note: Includes new frames

Racemesh C8 Corvette Stingray Engine Bay Screens

C8 Corvette RaceMesh Engine Bay Grilles - Weave - Inserts. Long considered "Simply the Best" Grilles offered, this 2 piece Grille Replacement covers all six of the openings and are everything you have come to expect from Racemesh. These Traditional Weave Grilles offer a classic style and are available in a variety of finishes. 

Manufactured in Marietta Georgia, Each set of Racemesh C8 Corvette Stingray Engine Bay Screens are a direct replacement for your factory part. Each Grille is hand manufactured and custom fit into OEM part, so you know they will be a perfect fit every time. Select from different screen color options including: Standard Stainless Steel, Flat Black, Semi-Gloss Black, Gloss Black, Silver Leopard, Chrome and Black Chrome

Professional Installation Recommended. If you are looking for the absolute Best Engine Bay Grilles and Screens for the C8 Corvette Stingray, then it has to be RaceMesh Grilles. 

Fitment: C8 Corvette Stingray (2020, 2021, 2022, 2023, 2024)

Product Note: Manufacturing Lead Time is Approximately 30 Days

Product Note: Does NOT include new frames

Racemesh C8 Corvette Stingray Rear Diffuser Screen

C8 Corvette RaceMesh Rear Diffuser Grille - Weave. Long considered "Simply the Best" Grilles offered, this 1 piece full replacement Stingray Screen is everything you have come to expect from Racemesh. These Traditional Weave Grilles offer a classic style and are available in a variety of finishes. 

Manufactured in Marietta Georgia, the C8 Corvette Stingray Rear Diffuser Screen is a direct replacement for your factory part. This Grille is hand manufactured and will fit into the OEM Frame on your car. Select from different screen color options including: Standard Stainless Steel, Flat Black, Semi-Gloss Black, Gloss Black, Silver Leopard, Chrome and Black Chrome

Professional Installation Recommended. If you are looking for the absolute Best Rear Lower Bumper Grille for the C8 Corvette Stingray, then it has to be RaceMesh Grilles. 

Fitment: C8 Corvette Stingray (2020, 2021, 2022, 2023, 2024)

Product Note: Manufacturing Lead Time is Approximately 30 Days

Product Note: Bumper Removal Required for installation

Racemesh C8 Corvette Stingray Rear Bumper Grilles

C8 Corvette RaceMesh Rear Heat Extractor Grilles - Weave. Long considered "Simply the Best" Grilles offered, this 2 piece full replacement Stingray Screens are everything you have come to expect from Racemesh. These Traditional Weave Grilles offer a classic style and are available in a variety of finishes. 

Manufactured in Marietta Georgia, Each set of C8 Corvette Stingray Rear Bumper Grilles are a direct replacement for your factory part. Each Grille is hand manufactured and custom fit into an official GM Part, so you know the fit will be perfect every time. The Frames are offered in matching Carbon Flash Metallic or Accelerate Yellow, Artic White, Black, Blade Silver, Ceramic Grey Elkhart Lake Blue, Long Beach Red, Rapid Blue, Sebring Orange, Shadow Gray Torch Red and Zeus Bronze. Select from different screen color options including: Standard Stainless Steel, Flat Black, Semi-Gloss Black, Gloss Black, Silver Leopard, Chrome and Black Chrome

Professional Installation Recommended. If you are looking for the absolute Best Heat Extractor Grilles and Screens for the C8 Corvette Stingray, then it has to be RaceMesh Grilles. 

Fitment: C8 Corvette Stingray (2020, 2021, 2022, 2023, 2024)

Product Note: Manufacturing Lead Time is Approximately 30 Days

Product Note: Bumper Removal Required for installation

Racemesh C8 Corvette Stingray Front Grille

C8 Corvette RaceMesh Front Grille. Long considered "Simply the Best" Grilles offered, these 4 piece full replacement Stingray Screens are everything you have come to expect from Racemesh. These Traditional Weave Grilles offer a classic style and are available in a variety of finishes. 

Manufactured in Marietta Georgia, Each C8 Corvette Stingray Front Grille is a direct replacement for your factory part. Each Grille is hand manufactured and custom fit into an official GM Part, so you know the fit will be perfect every time. The Frames are offered in matching Carbon Flash Metallic or Accelerate Yellow, Artic White, Black, Blade Silver, Ceramic Grey Elkhart Lake Blue, Long Beach Red, Rapid Blue, Sebring Orange, Shadow Gray Torch Red and Zeus Bronze. Select from different screen color options including: Standard Stainless Steel, Flat Black, Semi-Gloss Black, Gloss Black, Silver Leopard, Chrome and Black Chrome

Professional Installation Recommended. If you are looking for the absolute best Grilles and Screens for the C8 Corvette Stingray, then it has to be RaceMesh Grilles. 

Fitment: C8 Corvette Stingray (2020, 2021, 2022, 2023, 2024)

Product Note: Manufacturing Lead Time is Approximately 30 Days

Product Note: Bumper Removal Required for installation

C8 Stingray SR1 Performance Tow Hooks

C8 Corvette West Coast Corvette Tow Hooks have become very popular as either an everyday modification for those who regularly “track” their Corvette or the regular Joe who plans ahead in life and just keeps a couple in the trunk for an emergency. Many tracks require a front tow hook (tow eye) to be installed when on the track to speed up recovery and minimize the chances of the track flatbed operator screwing up your car pulling from the wrong spot. Not many of us race our Corvette though.

You may not be taking your Corvette to the track, but breakdowns or accidents happen and if you need a flatbed and don't have a tow hook, they will want to hook up to someplace under the front and the tow line/cable might be at an angle that would then hit the underside of the front and crack the splitter. Much better to have a hook available for them to use, either in the trunk or permanently installed.

C8 Stingray SR1 Performance Tow Hooks are available in three colors. Anodized Black, Red or Blue and are designed to fit your C7 Z51, Z06, Grand Sport & C8 Corvette Forums advise us to be careful when choosing a tow hook and to avoid the 'cool' looking aftermarket tow hooks sold on the web made of cheap Steel and will snap when you need it the most. Use the factory tow eye or a quality tow hook from a reputable racing equipment manufacturer such as you find with the C8 Corvette West Coast Corvette Tow Hooks.

It is better to be safe than sorry. If you have performance Tow Hooks, it will make it easier for the tow truck driver to maneuver the car without causing further damage.

Fitment: C8 Corvette Stingray 2020, 2021, 2022, 2023, 2024 Coupe and Convertible 

C8 Corvette Smoked Tail Light Kit 

C8 Corvette GS Creations Tail Light Blackout Kit is a simple and cost-effective way to add a smoked tail light tint cover over your Rear Tail Light Reflector/ Brake/ Reverse light / Turn Signal. you use your brake, reverse lights or turn signals they are still highly visible through the blackout covers. We have been using this level of smoke on all of our kits since the C5 Corvette!

With this kit, you will receive 10 lens covers, 5 per side, that will cover only the red reflectors, clear reverse and brake/turn signal light areas of your Corvette rear tail lights. Each C8 Corvette Stingray Smoked Tail Light Kit has been meticulously CAD designed, then precisely shaped using the latest laser technology. Installation will be a breeze. Each piece will be entirely covered with clear 3m double sided tape. All you will need to do is peel off the tape backing, line up and press on.

Installation is so easy a caveman could do it, with no disrespect meant to the caveman.  When you receive the C8 Corvette GS Creations Tail Light Blackout Kit, Simply clean the factory light with alcohol, remove the protective front covering, then tape backing and press each piece into place. Great news for you, they are not a flimsy film but yet a hard rigid smoked lens so you will not have to fuss with getting air bubbles, and lining them up straight will be a piece of cake.

The Stingray name returned in 2014 to the Corvette with the C7 and your 2020 + C8 Corvette Stingray Smoke Tail Light kit will present a great view to those trying to follow in your footsteps as you pull away in the express lane leaving them a nice view or your tail light modification in your late model Corvette.  

Fitment: C8 Corvette Stingray 2020, 2021, 2022, 2023, 2024 Coupe and Convertible 

Product Note: Check your local regulations

C8 Corvette Tail Light Blackout 

C8 Corvette GS Creations Molded Tail Light Covers are the professional way to bring the Black Out Tint look to the rear of your C8 Corvette. These Premium Molded Tail Light Smoked Covers (Blackouts) complete the look of your Stingray.

This is a 4-piece kit including one driver and passenger side tail light covers in a polycarbonate Lexan transparent smoked blackout look. The smoked color is built into the Lexan so no worries about paint fade, peeling or chipping over the years. We also include the side tail light reflector overlays in a 12 mils thick adhesive-backed Lamin-X film.

Do not be concerned with safety and visibility with these C8 Corvette GS Creations Molded Tail Light Covers. When headlights shine at your tail lights all 3 reflectors (per light) still will reflect, also when you use your Parking/ Brake/ Turn signal/ Reverse lights they are still highly visible. We have been using this level of smoke on all of our lights since the C5 Corvette and will give your C8 Corvette Tail Light the Black Out look and appearance you will appreciate while maintaining visibility.

The material used in manufacturing is a clear upgrade over previously used Acrylic which is a huge benefit to you as they will not break if dropped during installation or if you decide to remove them later. As for installation, with only 4 pieces total it will take you under 2 minutes. Each C8 Corvette tail light black out cover will come with pre-installed clear 3m tape. You simply clean your lights with the supplied alcohol, and let dry. You do not need to remove your rear bumper to install these covers.

Fitment: C8 Corvette Stingray 2020, 2021, 2022, 2023, 2024 Coupe and Convertible 

Product Note: Check your local regulations

Product Note: If your vehicle was ever waxed or ceramic coated most likely so was the area you are installing this product on even if it's a light or reflector. You MUST remove any wax or ceramic coating before you install this product or the 3m tape used will not stick. Alcohol alone will not do this, please consult with your detailer to find the best way to remove. You should test the area before install by putting any tape on the light and if there is good adhesion you should be ok. If the tape you used for the test does not stick or comes off very easy so will our covers

MBRP C8 Corvette Straight Pipes

C8 Corvette MBRP Cat Back Exhaust - Stingray. Look no further for one of the loudest exhaust systems on the market for the C8 Corvette Stingray. MBRP C8 Corvette Stingray Exhaust Systems take the rear engine sound to a whole new level. With over 20 years of exhaust manufacturing experience, the new MBRP Corvette Exhaust Systems for the C8 are everything you have come to expect from one of the world's leading manufacturers of performance exhaust systems. Each C8 Stingray Exhaust is specifically designed and engineered to fit your Corvette and comes with everything you need for a easy, no weld, and worry free installation.

MRBR C8 Corvette Straight Pipes are manufactured using the very best T-304 Stainless Steel and are Mandrel bent for maximum air flow. Not only will this system perform, but it looks good too. With Quad 4.5 inch Carbon Fiber Tips, the MBRP Corvette Exhaust will turn heads with its good looks and it deep, smooth Muscle Car Sound. This 3 inch C8 Corvette Exhaust System has a deep tone at idle and is about as loud as you can get at wide open throttle. Each system comes with a full set of instructions and everything you need for installation. This exhaust will not trigger CEL or require a tune. Improve the Performance, Sound and Style of your C8 Corvette Stingray with a MBRP Straight Pipe Exhaust System and enjoy Free Shipping on Us!

Free Shipping

Fitment: 2020, 2021, 2022, 2023, 2024 C8 Corvette Stingray

Product Note: Intended for Non-NPP Corvettes, will delete NPP on NPP cars

C8 Corvette Stingray ARH Exhaust System 

Take your Stingray to the next level with a C8 Corvette American Racing Headers R/T Cat Back Exhaust. Born from a legendary line of Corvette Exhaust systems, this cat back will not disappoint. You can bet that every bit of their 40 plus years of exhaust fabrication experience went into the design and engineering of this system for the all new C8 Stingray.

Why American Racing Headers? They are not in the business of making exhaust systems, they are in the business of making Horsepower. Look at just about any form of motorsports and you can see ARH is represented by their customer winning Championships and setting records along the way. The skilled fabricators at ARH are not only craftsman, but racers and street enthusiasts. 

Each C8 Corvette Stingray ARH Exhaust System is proudly manufactured and sourced with High Grade Aircraft quality T304 Stainless Steel. All systems are mandrel bent and tested for maximum performance with no drone, Offered in your choice of Polished Stainless Steel or Black Powder Coated tips We often get asked "What Exhaust System sound sounds best on the C8 Corvette Stingray," and the answer is ARH. The C8 Corvette American Racing Headers R/T Cat Back Exhaust eliminates the NPP Valves so you can get the true sound of your Stingray throughout the entire RPM range. The C8 ARH Exhaust System was designed and tested to give you a drone free sound experience that lets you control the exhaust volume with the gas pedal. Give the gas pedal a slight push and you get a tuned performance sound, mash it to the floor and you get a sound only reserved for an IMSA track. 

Each ARH Cat Back Exhaust comes with everything you need for a complete installation that will transform your C8 Corvette Stingray.

Free Shipping

Fitment: C8 Corvette Stingray (2020, 2021, 2022, 2023 and 2024)

Product Note: Eliminates NPP Valves

C8 Corvette Corsa Long Tube Headers

C8 Corvette Corsa Headers 16034, are for those looking to maximize their sound and performance gains, making CORSA Performance C8 headers are the perfect upgrade. CORSA Performance C8 headers accentuate sound and maximize flow, featuring 1 7/8" primaries. Corvette Corsa C8 Headers are built to last with 304 stainless steel construction, and they do not need a tune, are emissions legal, they bolt right in front of the stock catalytic converter and prepare you to hit the street or the track.

Features and Benefits of CORSA Performance C8 Headers

C8 Corvette Corsa Headers 16034 uses spark plug boot covers that are basalt-based, designed to increase spark plugs life by protecting them from excessive C8 engine temperatures.

Other features and benefits of CORSA Performance C8 Headers include:

• 100% Dyno Tuned
• 1 7/8" primaries to generate horsepower gains and maximum volume for maximum performance
• Maintains Stock Bolt Pattern
• 304 Premium Stainless Steel Construction
• 3.0" Collector with a Scavenging Spike
• Includes all hardware necessary for installation and gaskets
• Necks of 2.25" that connect to stock
• Header Flanges that connect right to CORSA Corvette Performance Hi-Flow Cats or stock.

Does Corsa Exhaust Systems Provide Maximum Performance?

C8 Corvette Corsa Long Tube Headers are part of a long history of performance parts. Corsa went on the market in 1998 with advanced exhausts designed specifically for the iconic Corvette. To achieve success, Corsa invested heavily in innovation and technology, which resulted in uncompromising high-quality products. For any vehicle to achieve maximum performance, the exhaust system must first be upgraded. Not only does a top-quality exhaust improve the vehicle's performance levels, but it also adds to the auto's image. Equip your vehicle with a top-quality Corsa exhaust system and enjoy an instant improvement in torque and horsepower. Each Corsa exhaust system is acoustically engineered with the RSC technology that removes the in-cabin drone and delivers a bold sound.

2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

C8 Corvette Stingray Corsa Xtreme with NPP

 C8 Corvette Corsa Cat Back Exhaust 21103 – NPP is intended for the C8 Corvette Stingray V8 C8 6.2 L. This Cat Back exhaust directly integrates to Valve Actuator Stock NPP, this actuator integration prevents CEL and deletes the AFM stock valve, to keep this part, use Part #21100.

The Cat-Back 3.0" AFM Active Valve has an Xtreme Sound Level that provides 9dBs louder than Stock and 1dB quieter. CORSA NPP valve assembly directly bolts to stock actuator motors. It is intended for Corvettes with factory NPP.

V8 Sound Controlled

The C8 Corvette Stingray Corsa Xtreme exhaust system with NPP puts control at your fingertips. It allows you to maintain complete control of the C8 Corsa Corvette sound profile that is complete with fully functional CORSA Cast valves NPP that seamlessly integrate to the C8 stock actuators.

Each NPP system is louder by +9 DBs and quieter by -1 DB than the stock system and incorporates CORSA's proprietary RSC Technology offering a drone-free driving experience along with the 6.2L LT2 engine that releases assertive exhaust notes with heavy acceleration. The AFM valve — in this system — is replaced by a machined simulator bracket specifically engineered to prevent the AFM Check Engine Light. Thus, this C8 CORSA Cat-Back system is ideal for drivers who are aggressive and plan on driving in "Track Mode".

Features and Specs Include:

• 16 lbs lighter than stock
• 2 NPP Only Valve System
• Maintains all Sound Modes
• 16 torque and 18 horsepower
• +9 DBs. Louder / -1 DBs. quieter
• Valve Simulator Bracket AFM: Machined
• 304 Stainless Steel Construction
• Lifetime Warranty for 5 Years Valves
• Two 4.5" Pro-Series Tips
• Mandrel Bent
• *4 Cylinder Mode that may show light resonant frequencies
• Straight-through Design
• Manufactured in Berea, Ohio, USA
• Includes instructions and hardware

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray with NPP

Product Note: Retains NPP Valves, Eliminates AMF Valves

C8 Corvette Corsa Xtreme with NPP

C8 Corvette Corsa Cat Back Exhaust 21100 – NPP is an added bonus to the CORSA Performance Exhaust systems as it results in more power, less backpressure, greater fuel economy, and more.

What's Included with the NPP C8 Corvette exhaust system

The NPP C8 Corvette Corsa exhaust system is intended for the all new Stingray Chevrolet Corvette V8 C8 6.2L and is offered in your choice of Polished or Black pro-series tips that bring a fresh style to your Stingray. It also comes complete with an Xtreme Sound Level of 9dB louder and 1dB quieter than stock. This Corsa NPP valve assemblies direct bolt to stock actuator motors and provides maximum exhaust volume and tone control with four active valves. The C8 Corsa Cat Back Exhaust System also includes two NPP valves and two AFM valves to control volume and drone during throttle application and different drive modes, without provoking a check engine light.

The C8 Corvette Corsa Xtreme exhaust system is built tough as it's made of durable stainless steel to last for many years of use. Specifically designed to deliver a tuned sound, raised volume, and quality drone control, no matter what your exhaust settings are. The Fresh: C8 Corvette Corsa Cat Back Exhaust 21100 – NPP is the ultimate choice for any C8 Corvette enthusiast.

Features and Specs of the Corsa C8 Cat-Back Exhaust 21100

• Maintains all Sound Modes
• +9 Decibels Louder and -1 Decibel Quieter
• 4 Valve NPP and AFM System
• +18 Horsepower and 16 LBS of Torque
• Custom X-Pipe Design
• Two Pro-Series Polished Tips
• Patented Reflective, No-Drone, Sound Cancellation Technology
• Lifetime Warranty - 5 Years Valves
• 304 Stainless Steel Construction 3.0"
• Sharp Looking Exhaust
• No CEL
• Easy to Install Without Welding
• 2.5" Diameter Tubing
• Mandrel Bent
• Straight-through Design
• Converts Fumes Into Unharmful Gases
• All Detailed Instructions and Hardware Included
• Guaranteed Free From Defects for Workmanship and Material
• Manufactured in Berea, Ohio, USA

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray with NPP

Product Note: Uses stock AMF and NPP Valves

C8 Corvette Stingray Corsa Xtreme Exhaust System

C8 Corvette Corsa Xtreme Cat Back Exhaust 21104 with 4.5" Quad Pro-Series Tips, is 13dBs louder than stock and is offered in your choice of Polished or Black Tips. 

Pure Sound with No Restrictions

The Corsa Xtreme Cat Back Exhaust 21104 was created for the track. Track Series C8 CORSA Performance Cat Back exhaust systems was designed to eliminate restrictions, bring on the noise, and maximize weight savings. Each Cat-Back exhaust system was Track-Tested, resulting in being Dyno proven to maximize performance while producing up to 16 LBS Ft. of TQ. and 18 HP. Thus, 27 pounds were shaved from this stock exhaust system.

Features and specs included in this Cat-Back exhaust system:

• 18 horsepower - 16 torque
• No Valve System
• Constructed with 3.0" 304 Stainless Steel
• AFM Machined - Valve simulator bracket.
• Louder than stock by 13 decibels
• 4.5" Twin Pro-Series Tips
• No Welding required
• Lifetime Warranty
• Mandrel Bent
• Includes Hardware & Detailed Instructions
• Manufactured in Ohio, USA
• Straight-through Design

C8 Corvette Corsa Xtreme Cat Back Exhaust 21104 system was designed for the 2020/2021 C8 Chevy Corvette V8 6.2L. Actuator integration prevents CEL. Deletes stock AFM Valve, but if you would like to keep AFM, you can use part #21102. Fits all NPP Corvettes & non-NPP Corvettes. However, to get the full use of NPP, use part #21103, or for NPP plus AFM, you can use part # 21100

All vehicle-specific CORSA products are designed and engineered to match the properties of vehicles they were specifically designed for, delivering perfect performance and fitment. In addition, Corsa branded exhaust systems come with a limited lifetime warranty that lasts for the time you own your vehicle. 

Fitment: C8 Corvette Stingray 2020, 2021, 2022, 2023 and 2024

Product Note: Eliminates AMF Valves, Eliminates NPP

C8 Corvette Corsa 3.0" Cat Back AFM with Quad 4.5" Tips 

The C8 Corvette Corsa Xtreme Cat Back Exhaust 21102 is used for the 2020 – 2021 C8 Chevrolet Corvette 6.2L V8 and fits both NPP and Non-NPP Corvettes while integrating directly with stock valve AFM actuator. For full valve usage, use Part # 21100. No Drone during 4 cylinder mode.

The C8 Corvette Corsa 3.0" Cat Back AFM with Quad 4.5" Tips has 13dBs louder than stock levels Xtreme Sound and the assembly of the Corsa AFM valve bolts to stock actuator motors directly. It should be used on Corvettes with AFM from the factory.

Corsa's Refined Track System

This exhaust system is like the Corsa Performance Track Series as it is made for those looking for an ultra-aggressive exhaust without resonance that can be caused by a 4 cylinder economy operation mode. Corsa's C8 AFM Only cat-back exhaust was manufactured to bring the noise, maximize weight savings, and eliminate restrictions while reducing the resonance you get from 4 cylinder mode. Offered in Polished Tips (21102) or Black Tips (21102BLK)

Each system underwent Track-Testing and was Dyno proven to perform at maximum capacity producing up to 16 LBS Ft. of Torque and 18 Horsepower. All while eliminating 25 lbs. from its stock exhaust system.

Features of the Corsa Performance C8 Cat-Back AFM include:

• 18 horsepower and 16 torque
• AFM Only Valve System
• 13 DBs. louder than stock
• 304 3.0" Stainless Steel Construction
• 5 Years Valves/ Lifetime Warranty
• Straight-through Design
• Mandrel Bent
• 4.5" Pro-Series Tips
• All Hardware and Instructions are Included
• Manufactured proudly in Berea, Ohio of the U.S.

Corsa recommends a professional perform the exhaust system installation. In addition, to get rid of the check engine light, some C8 exhausts may need a GM valve to relearn the sequence, because of the GM factory tolerances.

Fitment: C8 Corvette Stingray 2020, 2021, 2022, 2023 and 2024 

Product Note: Retains AMF Valves, Eliminates NPP

C8 Corvette AFE 440-401008-L Sway Bar Kit

The C8 Corvette aFe Control Sway Bars will significantly improve the handling and boost the performance of your Stingray. Precision crafted specifically for the C8 Corvette, this kit will keep your tires planted on the ground for better grip even during critical conditions. The rigidity of these bars diminishes body rolls resulting to smoother handling when cornering, driving on and off ramps, and during unexpected maneuvers. For the winning grip, steady performance, and long-lasting durability, the new pair of the AFE Control Sway Bars are your all in one package.

The precise control and superior handling offered by the C8 Corvette AFE 440-401008-L Sway Bar Kit starts with its lightweight 1026 DOM tubular steel construction. They are developed using cutting edge CAD technology and then CNC bent to exact tolerances to guarantee perfect operations and reliable performance. These C8 Corvette Sway Bars have 3-way adjustable front and rear bars, allowing the driver to achieve the preferred handling bias by dialing in the front and rear roll resistance. Both the front and rear sway bars have precision TIG welded ends for accurate positioning and consistency. The front features CNC machined ends while the rear utilizes waterjet end plates. Finished in a blue powder coated finish for the ultimate protection against corrosion.

AFE Control Sway Bars comes complete with premium quality low deflection 90A Durometer polyurethane bushings and 6061-T6 billet aluminum black anodized bushing brackets with grease fittings. These sway bars are precision machined using the latest in Computer Assisted Design technology to guarantee a perfect fit. AFE Control Sway Bar kit allows for an easy, direct-fit installation, no modifications required. The C8 Corvette AFE 440-401008-L Sway Bar Kit is proudly designed and manufactured in their Corona, California, Facility. This product is backed with a limited 1-year warranty.

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

C8 Corvette Stingray NoviStretch Bra

C8 Corvette NoviStretch Bra. Protect the paint on your Stingray with the NoviStretch Bra. Made with a high tech durable synthetic stretch fabric, the C8 Corvette NoviStretch Front End Protection allows for quick and easy installation and removal. The stretch fabric allows for a tight, secure fit that will not flap around in the wind. The mesh fabric allows free air flow. The Mesh Material is washable with mild soap and water and quick drying, making this the perfect bra for long or short road trips. The NoviStretch front bumper mask includes a limited 12 Month Warranty. Made in the USA. FBM850V

The C8 Corvette Stingray NoviStretch Bra has been used for generations, gong all the way back to 1997. The easy on and easy off make it ideal when an unexpected trip comes up and its light and compact design allows you to pack it up and store it in the front or rear storage compartment. The NoviStretch Bra will keep bugs and road debris from getting embedded in your paint and clearcoat. Installs by replacing some factory screws with the provided replacement fasteners, and then snapping the matching / corresponding fasteners on the stretch bra. Protect the paint on your car with C8 Corvette NoviStretch Bra.

Fitment: C8 Corvette Stingray 2020, 2021, 2022, 2023, 2024

Product Note: Will cover forward facing cameras and vision will be less defined

C8 Corvette Stingray Headers

Don’t allow your restrictive factory exhaust to prevent your engine from reaching its maximum potential. Bolt-on a set of new AFE Twisted Stainless Steel Headers and gain the highest amount of horsepower and improved throttle response. The C8 Corvette aFe Twisted Steel Headers have been dyno-tested and has shown to produce up to 24 HP and 17 ft./lbs. torque additional power gains.

C8 Corvette aFe Twisted Steel Headers are built tough with its 16-gauge 304 grade stainless steel construction. They are guaranteed to endure the most punishing driving conditions under the hood while pumping out as much horsepower and torque from your engine as possible. Their mandrel bends diminish restrictions and offer the smoothest pathway for exhaust gas flow, optimizing efficiency and boosting performance. This exhaust upgrade also gives you a powerful sound when you hit the gas, letting you know that your V8 is at its peak performance. The twisted steel C8 Corvette Stingray Headers feature a Tri-Y design and tubes with optimized length for better scavenging and greater exhaust flow. Its built with stainless steel flanges for a secure seal and TIG welded inlet ports that doesn’t warp even in extreme conditions. AFE 48-34148 has 1-7/8” – 2-1/8” – 2-3/4” piping diameters and includes auxiliary O2 bung and plug for wideband O2 sensor or other equipment.

These AFE headers comes complete with factory gaskets and manifold bolts for an easy, direct bolt-on installation, without cutting or modifications. They retain all factory sensors and compatible to work with factory catalytic converter. These twisted stainless steel C8 Corvette Stingray Headers are currently not CARB compliant and are not legal for sale or use on vehicles registered with the California Department of Motor Vehicles and other states that follow CARB standards. All AFE headers are manufactured to the highest quality standards in Corona, California, USA and are backed by a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

Product Note: Not legal for sale in the State of California 

C8 Corvette Tri-Y Headers

Your C8 Corvette’s engine will never know real power until you dump the restrictive stock set up. aFe Power made the Stainless Steel Twisted Headers to be your C8’s ultimate exhaust upgrade for more power, greater performance, and maximum efficiency. Based on in-house dyno-testing, your engine can get up to 24 HP and 17 ft./lbs. torque additional power gains.

C8 Corvette aFe Twisted Steel Headers - Brushed Finish have primary tubes made entirely of 16-gauge 304 grade stainless steel to offer superior strength and maximum performance. They are mandrel bent with optimized diameters of 1-7/8” – 2-1/8” – 2-3/4” to guarantee massive, unrestricted exhaust flow for all-out horsepower and torque gains. Its Tri-Y design with optimized tube lengths enhances cylinder scavenging and further improving exhaust flow. The brushed finish of the C8 Corvette Tri-Y Headers offer superior protection against corrosion while adding some exotic look to your ride. This system delivers powerful sound every time you hit the gas pedal letting you know that more horsepower and torque are pumped out from your V8. C8 Corvette aFe Twisted Steel Headers with Brushed Finish are built with TIG welded inlet ports for solid strength against warpage and stainless steel flanges to achieve a leak-proof seal. AFE part number 48-34148-H comes with auxiliary O2 sensor bung and plug that accommodates wide-band oxygen sensor and other equipment.

C8 Corvette Tri-Y Headers are direct-bolt on kits supplied with necessary manifold bolts and factory gaskets, no cutting or modifications required. Using the latest in CAD technology, these headers are guaranteed for a perfect fit, retaining factory sensors, and compatible with factory catalytic converter. AFE 48-34148-H Stainless Steel Twisted Headers are currently not CARB Compliant and is therefore not legal for sale or use on vehicles registered in the California Department of Motor Vehicles. It is also not for use in other states that follow CARB emission standards such as NY, ME, and others, check your state laws. All aFe Headers are 100% designed and manufactured in the USA and comes with a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

Product Note: Not legal for sale in the State of California 

C8 Corvette Ceramic Coated Headers

Your C8 Corvette already has a very powerful engine. The only thing that’s stopping it from reaching its peak power potential is your restrictive exhaust. Get all the horsepower and torque it can possibly pump out with the new aFe Power Twisted 304 Stainless Steel Titanium Ceramic Coated Headers! C8 Corvette aFe Twisted Steel Headers - have been dyno-tested in house and produced up to additional 24 HP and 17 lbs./ft torque.

These C8 Corvette Ceramic Coated Headers are built for maximum strength and efficiency from the ground up, using only the highest quality stainless steel. The piping diameters are optimized featuring mandrel bends that will eliminate all the restrictions and allow exhaust gases to flow smoothly for more horsepower and torque. It features the Tri-Y design with optimized pipe lengths that significantly improves scavenging, boosts performance, and maximizes exhaust flow. C8 Corvette aFe Twisted Steel Headers - Titanium Ceramic Coated feature the best coating combination on the market today. Treated with a titanium color cerakote ceramic finish on the outside and a copper ceramic coating on the inside. This combination makes these headers able to reduce high temperatures on the outside of the headers and in the engine compartment, improving engine efficiency. These headers also give your ride a crisp and powerful exhaust note when you hit the gas pedal, releasing more horsepower and torque from your V8. It is built with TIG welded inlet ports to prevent warping and stainless steel flanges for a secure, leak-proof seal. AFE 48-34148-T features 1-7/8” – 2-1/8” – 2-3/4” tubing and comes with auxiliary O2 sensor bung and plug for a wide band O2 sensor or other equipment.

aFe stainless steel C8 Corvette Ceramic Coated Headers includes all necessary manifold bolts and factory gaskets for an easy, no modifications required installation. It is precision designed for a hassle-free install, utilize factory sensors, and retain the factory catalytic converter.  AFE part number 48-34148-T is currently not compliant with CARB standards and not legal for sale or use on vehicles registered in the California Department of Motor Vehicles. It is also not legal for use on vehicles in other states that follow CARB emission standards. These stainless steel headers are proudly designed and manufactured in the USA and backed by a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

Product Note: Not legal for sale in the State of California 

C8 Corvette Muffler Delete Exhaust System

The C8 Corvette aFe Muffler Delete Exhaust System - Black Tips. Let your Stingray breathe with this Muffler delete exhaust system from advanced Flow engineering. Manufactured to be the loudest exhaust system for the C8 Corvette, aFe Power utilized only the most advanced CAD technology for its race-proven design and incorporated the finest stainless steel for a lifetime of satisfaction. If you’re thinking of dumping your restrictive set up, this is the best upgrade your money can buy.

This C8 Corvette Muffler Delete Cat Back Exhaust utilizes 3 inch – 2-1/2 inch mandrel bent T-304 solid, austenitic 304 stainless steel for unrivaled strength, harmonic balance  and long-lasting durability. The muffler delete design unleashed more HP/TQ while producing a drone free, crisp, aggressive exhaust note. This C8 Corvette aFe Muffler Delete Exhaust System is built with a mitered merge x-pipe that evenly distributes exhaust pulses across the entire system to maximize scavenging and reduce drone. The entire kit is 100% TIG welded and features heavy duty interlock flex pipe for greater strength and reliability. As the finishing touch, the pipes exit into massive quad 4 ½ inch polished stainless steel tips. aFe Power part number 49-34127NM-B is intended for vehicles without NPP dual mode exhaust valves. For applications with NPP valves, the dual mode exhaust valves will be eliminated.

C8 Corvette Muffler Delete Exhaust System is designed to be an exact fit for your Stingray. It uses all the same factory style flanges and hangers so there is no welding, cutting or permanent modification required. Included is all the necessary hardware and a full set of step by step instructions for an easy installation. AFE 49-34127NM-P includes factory style exhaust valves that uses the factory motor, (not included). All AFE performance parts and accessories are manufactured in their Corona, California, USA facility. AFE Mach-Force XP systems are backed by a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette AFE Mach Force Exhaust System

The Mach-Force series C8 Corvette aFe Mach Force Exhaust System is the most powerful, best looking, and best aftermarket replacement for your restrictive factory exhaust. Designed using only cutting-edge CAD technology and built with T-304 stainless steel, this kit will surely outperform competition in sound, strength, and performance gains.

The C8 Corvette aFe Muffler Delete Exhaust System - Carbon Fiber Tips is constructed for maximum strength and durability using 3”- 2-1/2” 304 grade stainless steel pipes with brushed finish. Featuring very smooth and precision-diameter mandrel bends, this system greatly reduces restrictions, improves engine efficiency, and produces more horsepower and torque than competition. The muffler delete design offers a very aggressive, performance growl without the obnoxious drone for a crisp, clean sound of power when you hit the gas. This C8 Corvette aFe Mach Force Exhaust System features an integrated mitered merge x-pipe that works great at balancing and distributing the exhaust pulses throughout the system to maximize scavenging and minimize droning. Utilizing the most advanced CAD technology and precision TIG welding, this system delivers race-proven design, powerful performance, and high-tolerance factory fitment. This C8 Corvette Cat Back System has an interlock flex pipe that adds more strength and durability. The kit finishes off in massive 4-1/2” quad carbon fiber stainless steel clamp-on tips with a laser-etched aFe Power logo for the authentic and aggressive styling. aFe Power part number 49-34127NM-C is specifically designed for vehicles without NPP dual mode exhaust valves. For vehicles equipped with NPP valves, the dual mode exhaust valves will be eliminated.

This kit comes with all necessary hardware and step-by-step installation instructions for a hassle-free install. The aFe Power Muffler Delete Cat Back System is designed for a custom fit, bolt-on installation using factory style flanges and hangers, without cutting or modifications required. It comes with factory style exhaust valves using factory motor, not included in the kit. This C8 Corvette aFe Muffler Delete Exhaust System - Carbon Fiber Tips is proudly designed and manufactured in their Corona, California, USA facility and comes with a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette AFE Exhaust System

The C8 Corvette aFe Muffler Delete Exhaust System - Black Tips is built to offer powerful strength, sound, and performance. aFe Power utilized only the most innovative CAD technology for its race-proven design and the finest stainless steel for its robust construction. If you’re thinking of dumping your restrictive set up, this is the best upgrade your money can buy.

This Cat-back C8 Corvette AFE Exhaust System features 3” – 2-1/2” mandrel bent pipes made from solid, austenitic 304 stainless steel for unrivaled strength and long-lasting durability. The muffler delete design will unleash more horsepower and torque while producing crisp, aggressive exhaust note without droning. This C8 Corvette aFe Muffler Delete Exhaust System - Black Tips is built with a mitered merge x-piper that evenly distributes and balances exhaust pulses across the entire system to optimize scavenging and diminish drone. The entire kit is 100% TIG welded and features heavy duty interlock flex pipe for greater strength and reliability. As the finishing touch, the pipes exit into massive quad 4 ½ in. stainless steel tips with black metallic finish laser etched with the aFe Power logo for the stealth look. aFe Power part number 49-34127NM-B is intended for vehicles without NPP dual mode exhaust valves. For applications with NPP valves, the dual mode exhaust valves will be eliminated.

C8 Corvette AFE Exhaust System is precision designed for a custom, high tolerance fitment on your vehicle. It uses factory style flanges and hangers for a secure fit, no welding or modification required. The kit includes all necessary hardware and comprehensive instructions for a complete and easy install. AFE 49-34127NM-B includes factory style exhaust valves (using factory motor, not included). All AFE performance parts and accessories are manufactured in their Corona, California, USA facility. AFE Mach-Force XP systems are backed by a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette 49-34124-P AFE Exhaust System

Add power and performance to your C8 Corvette Stingray with an aFe Mach Force XP Exhaust System. The power-boosting abilities of this Cat-back C8 Corvette Stingray AFE Exhaust System starts with premium quality its 3”-2-1/2” mandrel bent 304 stainless steel tubing with brushed finish. Built with very robust construction with the smooth mandrel bends to reduce restrictions, your new V8 will get massive exhaust flow, greatest performance gains, and improved engine efficiency. This C8 Corvette aFe Mach Force-Xp Exhaust System - Polished Tips also produces a powerful sound that unleashes more horsepower and torque with its high-temperature, high-flow muffler. The loud and crisp performance growl produced by the AFE muffler does not come with the annoying drone because of the integrated X-pipe that balances and equally distributes pulses throughout the system.  The AFE muffler features a black metallic finish that does not just add a stealth-look but also protects against corrosion damage. This AFE Mach-Force Cat Back System for the C8 Corvette features a heavy duty interlocking flex pipe for added durability and strength. This kit ends in a massive 4-1/2 in. quad stainless steel clamp-on Polished tips with a laser-etched aFe Power logo for great authentic style. AFE 49-34124-P is designed to fit vehicles with NPP dual mode exhaust valves only. The NPP valves comes with the Z51 performance package or the factory performance exhaust option.

The C8 Corvette Stingray AFE Exhaust System was manufactured as a direct-bolt on installation to your C8 Corvette Stingray, using factory style flanges and hangers, no cutting or modifications required. It comes with factory style exhaust valves using factory motor, not included in the kit. This product comes with a limited 2-year warranty. 

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette Stingray AFE Exhaust System

aFe Power utilized the latest in CAD technology and only the highest quality metal construction to offer the race-proven design and superior performance of the C8 Corvette aFe Mach Force-Xp Exhaust System - Black Tips. The in-house experts at AFE dyno-tested this C8 Corvette exhaust upgrade and has proven to produce up to additional 9 HP and 10 lbs./ft. torque.

The power-boosting abilities of this Cat-back C8 Corvette Stingray AFE Exhaust System starts with premium quality its 3”-2-1/2” mandrel bent 304 stainless steel tubing with brushed finish. Built with very robust construction with the smooth mandrel bends to reduce restrictions, your new V8 will get massive exhaust flow, greatest performance gains, and improved engine efficiency. This C8 Corvette aFe Mach Force-Xp Exhaust System - Black Tips also produces a powerful sound that unleashes more horsepower and torque with its high-temperature, high-flow muffler. The loud and crisp performance growl produced by the AFE muffler does not come with the annoying drone because of the integrated X-pipe that balances and equally distributes pulses throughout the system.  The AFE muffler features a black metallic finish that does not just add a stealth-look but also protects against corrosion damage. This AFE Mach-Force Cat Back System for the C8 Corvette features a heavy duty interlocking flex pipe for added durability and strength. This kit ends in a massive 4-1/2 in. quad stainless steel clamp-on tips with a laser-etched aFe Power logo for great authentic style. AFE 49-34124-B is designed to fit vehicles with NPP dual mode exhaust valves only. The NPP valves comes with the Z51 performance package or the factory performance exhaust option.

The C8 Corvette Stingray AFE Exhaust System is designed for a direct-bolt on installation to your C8 Corvette, using factory style flanges and hangers, no cutting or modifications required. It comes with factory style exhaust valves using factory motor, not included in the kit. This product comes with a limited 2-year warranty. All AFE Power performance parts are proudly designed and manufactured in their Corona, California, USA facility.

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette AFE Exhaust System

C8 Corvette aFe Mach Force-Xp Exhaust System - Carbon Fiber Tips is a great performance upgrade for your restrictive factory setup. This high quality exhaust kit is exactly what your Corvette needs to achieve increased flow, powerful sound, more horsepower, torque and improved performance. This C8 Corvette AFE Exhaust System is dyno-tested in-house and produced up to 9 HP and 10 lbs./ft torque in performance gains.

The Mach Force-XP system is built of 3” – 2-1/2” mandrel bent 304 grade stainless steel pipes for extreme strength and reliable performance. This cat-back exhaust is crafted using the latest in CAD technology and then TIG welded for the custom fit and race-proven design. The brushed finish adds more durability, sleek look, and maximum corrosion resistance. It features a stealth looking high-flow muffler that unleashes trapped horsepower and produces crisp, clean tone resounding power while minimizing drone. The AFE muffler comes with an integrated X-pipe that effectively balances and equally distributes pulses throughout the entire system, resulting to diminished drone and maximum scavenging abilities. This muffler is finished with a high-temperature metallic black coating for long-lasting durability. For more strength and durability, the C8 Corvette aFe Mach Force-Xp Exhaust System - Carbon Fiber Tips utilize a robust flex pipe with internal interlock liner. AFE 49-34124-C only fits C8 Corvettes with NPP dual mode exhaust valves, included in the factory performance exhaust option and the Z51 performance package. It uses factory style valves (using factory motor, not included).

The C8 Corvette AFE Exhaust System is supplied with all necessary hardware and step-by-step installation instructions for a complete install. This direct bolt-on system utilizes the factory style flanges and hangers for a hassle-free installation, no welding or any modification required. All AFE products are never outsourced, they are proudly designed and manufactured in Corona, California, USA. This aFe Mach Force-Xp Exhaust System for the C8 Corvette is backed by a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette Throttle Body Spacer

Maximize horsepower and improve throttle response without the obnoxious whistling with the C8 Corvette aFe Throttle Body Spacer! This inexpensive upgrade installs between the stock intake system and the throttle body and improves volumetric efficiency. This results to optimum air and fuel ration, maximum combustion, and greater horsepower and torque gains.

The C8 Corvette aFe Throttle Body Spacer is precision machined from premium quality, solid 6061-T6 aluminum for maximum performance, weight reduction, and high strength. Its unique serrated/helix design creates more air turbulence than typical helix only throttle body spacers. The greater air turbulence optimizes the air and fuel ration for maximum combustion, resulting to more horsepower and torque gains and improved throttle response. C8 Corvette Throttle Body Spacer also does not produce the annoying whistling sound commonly associated with throttle body spacers. Its black anodized finish protects against corrosion while improving the looks of the engine bay. AFE 46-34017B Throttle Body Spacer is designed for use on factory intake system only.

The C8 Corvette Throttle Body Spacer includes all hardware needed and easily installs into the factory mounting location. Each kit comes with a high quality gasket for a 100% secure seal, durable silicone coupling that guarantees the perfect fitment and uncompromised air flow into the factory air intake system, and step by step installation instructions. This AFE Power Throttle Body Spacer for C8 Corvette models is currently not CARB exempt and is not for sale or use on vehicles registered in the California Department of Motor Vehicles. AFE Power part number 46-34017B is also not legal for use on vehicles registered in other states that follow CARB standards, check your local state emission standards. All AFE Silver Bullet Throttle Body Spacers are proudly designed and manufactured in the USA and covered by a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

Product Note: Will NOT fit on an aFe Intake Systems

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C8 Corvette AFE Intake Throttle Body Spacer

The C8 Corvette aFe Silver Bullet Throttle Body Spacer is an easy, effective, and inexpensive way to upgrade your engine’s performance and improve fuel efficiency. It has been dyno-tested to add up to 12 hp and 14 ft./lbs of torque without the whistling typically associated with ordinary helix spacers. If you are looking at supercharging your C8 Corvette’s combustion chamber, the aFe Silver Bullet Throttle Body Spacer is the quiet yet most powerful solution.

To guarantee long-lasting strength, weight reduction, and superior performance, the C8 Corvette aFe Silver Bullet Throttle Body Spacer is CNC crafted from solid 6061-T6 aluminum. The innovative serrated/helix design creates power-generating air turbulence that helps achieve the best air and fuel ratio for maximum combustion. This increases horsepower and torque, improves throttle response, and boosts engine performance without the obnoxious intake whistling. The C8 Corvette AFE Intake Throttle Body Spacer features a black anodized finish too add a stealth look into the engine bay. This C8 Corvette AFE 46-34023B Silver Bullet Throttle Body Spacer will only fit aFe Power Intake Systems part numbers 57-10013D, 57-10013R, 58-10007D, and 58-10007R. For factory intake systems, use throttle body spacer part number 46-34017B.

The C8 Corvette AFE Intake Throttle Body Spacer kit comes with all necessary hardware and uses factory mounting locations for the hassle-free installation. It’s supplied with a premium gasket for the perfect seal, silicone coupling for the secure fitment with the aFe Power intake system, and comprehensive installation instructions. This product is currently not CARB exempt and is not legal for sale or use on vehicles registered with the California Department of Motor Vehicles. It is also not for use on vehicles registered in other use that follows CARB emission standards. This AFE Throttle Body Space for C8 Corvette models is proudly made in the USA and backed by a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

Product Note: Will NOT fit on an OEM Intake

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C8 Corvette AFE Air Filter

For the best Corvette yet, aFe Power engineered the highest flowing air filter in their lineup. The C8 Corvette aFe Magnum FLOW Pro 5R Air Filter is created to feed the new LT2 V8 engine with colder, denser and cleaner air for maximum performance. C8 Corvette performance air filter part number 10-10148 can deliver up to 27% air flow increase.

In terms of construction, design, and air flow technology, the C8 Corvette AFE Air Filter beats all other air filters in the market. It features not just a single layer, but five progressive layers of pre-oiled cotton gauze media with superior filtration efficiency. The progressive layering allows it to still delivery maximum air flow even when dirty. The media of the aFe Magnum FLOW Pro 5R Air Filter is the best choice for street and track driving. It has larger surface area to hold more dust while still providing high air flow, leading to longer service intervals. Cleaning and recharging it is easy with the aFe Power Cleaner and oil, sold separately. The rounded deep open pleats offer greater surface area that traps more dirt than competition. Another distinctive feature of this C8 Corvette AFE Air Filter is the progressive bump seal that works great even with the most uneven housing. Designed for the perfect sealing and fit, this pliable sealing surface eliminates the need for sealants and gaskets. The base and top are built tough with its 100% polyurethane construction. This polyurethane material is highly resistant to damage from the repeated heat cycles from the engine bay. While other materials degrade from the heat, polyurethane can maintain its original shape and strength.

This performance air filter upgrade AFE 10-10148 for the C8 Corvette is backed by a lifetime warranty for the entire life of your vehicle.

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

C8 Corvette AFE Intake

aFe offers the most powerful air filter and intake tube combination in their line-up for the new Chevy C8 Corvette. The C8 Corvette aFe Track Series Carbon Fiber Intake comes with everything your vehicle needs to make the most power, drive faster, and achieve its best performance.

The C8 Corvette aFe Track Series Carbon Fiber Intake uses the best and most powerful air filter from aFe Power’s line-up. The massive, dual 4 in. flange 360-degree radial flow air filters utilize the Pro-5R performance filters with the pre-oiled, progressive 5-layer cotton gauze filter media. These monster filters will deliver the highest flow of colder and cleaner air to your V8 to boost horsepower and performance. The Pro-5R provides longer service before cleaning is required and the best choice for street or track driving. The intake tube of the C8 Corvette AFE Cold Air Intake features a lightweight twill weave carbon fiber construction and innovative design to direct massive air flow to the engine. This carbon fiber intake tube works great in reducing weight compared to metal tubes while upgrading the engine bay’s appearance. To further improve engine performance and increase cold air, the filters are enclosed in a heat-resistant housing made of cross-linked polyethylene polymer. It keeps away hot engine air and collects the coolest air possible from the factory inlets on the side of the car. Custom designed for the perfect fit and easy installation, the housing uses silicone bellow couplings and mounts directly into the factory locations.

This AFE 57-10013R Cold Air Intake for C8 Corvette models include high-quality hardware for strength, durability, and secure installation. This kit comes complete with stainless steel clamps, silicone couplings, and installation instructions. The C8 Corvette AFE Cold Air Intake is currently not CARB exempt and is for use on vehicles registered with the California Department of Motor Vehicles. It is also not for use on vehicles registered in states that follow CARB standards. Part Number 57-10013R is backed by a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.